BenQ E2200hd User Manual

							  21   Picture optimization
5. Picture optimization 
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AU TO key 
function. Press the AU TO
 key to optimize the currently displayed image to the screen. 
When you connect a digital video output using a digital (DVI or HDMI) cable to your monitor, 
the AUTO key and the Auto Adjustment function will be disabled, because the monitor will 
automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the 
monitor when you use the AUTO key function.
If you wish, you can always adjust the screen geometric settings manually using geometry menu 
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you can 
use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as 
the desktop of your operating system. However, we recommend that you use auto.exe. As you 
run auto.exe, a test pattern displays.
2. Press the AU TO key on the monitor.
3. Press the MENU key to access the monitor On-Screen Display (OSD) menu.
4. Use the   or   keys to select DISPLAY and press the ENTER key to enter the menu.
5. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), press the   
or   keys to select Pixel Clock and press the ENTER key. Then press the   or   keys to 
adjust the monitor until the noise disappears.
6. If you notice a horizontal noise, press the   or   keys to select Phase and press the 
ENTER key. Then press the   or   keys to adjust the monitor until the noise disappears.
 
						

							22  How to adjust your monitor  
6. How to adjust your monitor
The control panel
1. “AUTO”: Adjust vertical position, phase, horizontal position and pixel clock automatically.
2. “MENU” key: Activate OSD main menu and return to the previous menu or exit OSD.
3. /Volume key: For Up/Increase adjustment. The key is the hot key for Volume.
4. /Mode key: For Down/Decrease adjustment. The key is the hot key for Mode. 
5. “ENTER” key: Enter sub menus and select items. For models with DVI inputs, this key is also 
the hot key for Input.
6. “Power”: Turn the power on or off.
OSD = On Screen Display.
The hot keys will display a graduated scale for adjusting the value of that setting, and will only operate 
while the OSD menu is not currently displaying. Hot key displays will disappear after a few seconds of no 
key activity. See Hot key mode on page 23.
AUTO MENU ENTER
1
2
5
6
4
3
 
						

							  23   How to adjust your monitor
Hot key mode
The monitor keys perform as hot keys to provide direct access to particular functions whenever 
the menu isnt currently displaying on-screen.
Volume hot keys
Mode hot key
Input hot key (not available for analog-only models)Press the   key to display the Volume indi-
cators. Further press the   key will increase 
the volume, while the   key will decrease 
the volume.
To Mute, press the Volume hot key for 3 
seconds. To release Mute, press the Volume 
hot key for 3 more seconds.
Press the   key continually to switch 
between the 5 modes for the main window, 
including Standard, Movie, Dynamics, 
Photo, and sRGB. The setting will take effect 
immediately.
See also 
Picture Mode on page 29. 
Press the ENTER key to toggle between 
different PC video signal inputs that may be 
connected to your monitor.
The setting will take effect immediately.
See also 
Input on page 32. 
 
						

							24  How to adjust your monitor  
Main menu mode
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor. 
Press the MENU key to display the following main OSD menu. 
The OSD menu languages may differ from the product supplied to your region, see “Language on page 
33” under “OSD Settings” for more details. 
For more information on each menu, please refer to the following pages:
• Display menu on page 25
• Picture menu on page 27
• Picture Advanced menu on page 29
• Audio menu on page 31
• System menu on page 32
There are five main OSD menus:
1. Display
2. Picture
3. Picture Advanced
4. Audio
5. System
Use the   (up) or   (down) keys to 
highlight a menu item, and press the 
ENTER key to enter the Menu item settings.1
3
4 25
 
						

							  25   How to adjust your monitor
Display menu
1. Press the MENU key to display the main 
menu.
2. Press the   or   keys to select DISPLAY 
and then press the ENTER key to enter the 
menu.
3. Press the   or   keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the   or   keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Auto 
AdjustmentOptimizes and adjusts the 
screen settings 
automatically for you. The 
AU TO
 key is a ‘hot key’ for 
this function. 
When you connect a 
digital video output 
using a digital (DVI or 
HDMI) cable to your 
monitor, the AUTO key 
and the Auto 
Adjustment function 
will be disabled.
Press the ENTER key to 
select this option and make 
adjustment.
 
						

							26  How to adjust your monitor  
H. Position Adjusts the horizontal 
position of the screen 
image. 
Press the   or   keys to 
adjust the value.0 to 100
V. Position Adjusts the vertical 
position of the screen 
image.0 to 100
Pixel Clock Adjusts the pixel clock 
frequency timing to 
synchronize with the 
analog input video signal. 
Not applicable to a digital
input signal.
See also: 
Picture 
optimization on page 21
.0 to 100
Phase Adjusts the pixel clock 
phase timing to 
synchronize with the 
analog input video signal. 
Not applicable to a digital
input signal.
See also: 
Picture 
optimization on page 21
.0 to 63
 
						

							  27   How to adjust your monitor
Picture menu
1. Press the MENU key to display the main 
menu.
2. Press the   or   keys to select 
PICTURE and then press the ENTER key 
to enter the menu.
3. Press the   or   keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the   or   keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Brightness Adjusts the balance 
between light and dark 
shades.
The function is not 
available for use when 
DynamicContrast is 
on.
Press the   key to 
increase the brightness 
and press the   key to 
decrease the brightness.0 to 100
Contrast Adjusts the degree of 
difference between 
darkness and lightness. 
The function is not 
available for use when 
DynamicContrast is 
on.
Press the   key to 
increase the contrast and 
press the   key to 
decrease the contrast.0 to 100
Sharpness Adjusts the clarity and 
visibility of the edges of 
the subjects in the image.Press the   key to 
improve the crispness of 
the display and press the 
 key to have softness 
effect on the display.1 to 5
Color - Press ENTER to enter the Color menu.
 
						

							28  How to adjust your monitor  
Normal Allows video and still 
photographs to be viewed 
with natural coloring. 
This is the factory default 
color. 
Press the   or   keys 
to select this option. Bluish Applies a cool tint to the 
image and is factory 
pre-set to the PC industry 
standard white color.
Reddish Applies a warm tint to the 
image and is factory 
pre-set to the news print 
standard white color.
User Mode Tailors the image color 
tint. The blend of the Red, 
Green and Blue primary 
colors can be altered to 
change the color tint of 
the image. Decreasing one 
or more of the colors will 
reduce their respective 
influence on the color tint 
of the image. e.g. if you 
reduce the Blue level the 
image will gradually take 
on a yellowish tint. If you 
reduce Green, the image 
will become a magenta 
tint.Press the   or   keys 
and the ENTER key to 
select Red, Green, or Blue. 
Then use the   or   
keys to make the color 
adjustments.• Red 
(0 to 100)
• Green
(0 to 100)
• Blue
(0 to 100)
Reset Color Resets the User Mode 
custom color settings to 
the factory defaults. Press the   or   keys 
to change the settings. • YES
• NO
Press MENU to leave the Color menu.
Dynamic Contrast
(available when 
the Picture Mode 
is set to Photo, 
Dynamics, or 
Movie)The function is to 
automatically detect the 
distribution of an input 
visual signal, and then to 
create the optimal 
contrast.
Activating 
DynamicContrast will 
disable Brightness 
and Contrast controls. 
Press the ENTER key to 
select this option. Press 
the   or   keys to 
change the settings.• YES
• NO
 
						

							  29   How to adjust your monitor
Picture Advanced menu
1. Press the MENU key to display the main 
menu.
2. Press the   or   keys to select 
PICTURE ADVANCED and then press the 
ENTER key to enter the menu.
3. Press the   or   keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the   or   keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Picture Mode
Selects a picture mode that 
best suits the type of 
images shown on the 
screen. 
• Standard - for basic PC 
application.
• Movie - for viewing 
videos.
• Dynamics - for viewing 
landscape-specific videos 
and playing games.
• Photo - for viewing still 
images.
• sRGB - for better color 
matching representation 
with the peripheral 
devices, such as printers, 
DSCs, etc.Press the   or   keys 
to change the settings.• Standard
• Movie
• Dynamics
• Photo
• sRGB
Senseye Demo Displays the preview of 
screen images under the 
selected mode from 
Picture Mode. The screen 
will be divided into two 
windows; the left window 
demonstrates images of 
Standard mode, while the 
right window presents the 
images under the specified 
mode.Press the   or   keys 
to change the settings. • ON
• OFF
 
						

							30  How to adjust your monitor  
Display Mode This feature is provided to 
allow aspect ratio’s other 
than 16:9 to be displayed 
without geometric 
distortion.
• Overscan -Slightly 
enlarges the input image. 
Use this feature to hide 
annoying edge noise if 
present around your 
image.
• Full - Scales the input 
image to fill the screen. 
Ideal for 16:9 aspect 
images.
• Aspect - The input image 
is displayed without 
geometric distortion 
filling as much of the 
display as possible. 16:9 
images will fill the screen 
horizontally while 4:3 
images will fill the screen 
vertically.
• 
(E900HD, E900HDA, 
E900HDP, and E900HDAP 
only) For the first time 
using this monitor with the 
resolution 1360x768, the 
default Display Mode is 
Aspect.
Press the   or   keys 
to change the settings. 
The options under 
Display Mode will be 
different depending on the 
input signal sources.
When the signal 
source is from a 
DVI or D-sub 
source, and the 
input image is of 
non-wide aspect 
ratio:
• Full
• Aspect
Or
When the signal 
source is from a 
HDMI source:
• Overscan
• Full
• Aspect
AMA
(available for 
E2200HD, 
M2200HD, 
E2400HD, and 
M2400HD)Improves the gray level 
response time of the LCD 
panel.Press the   or   keys 
to change the settings.• ON
• OFF
The ON/OFF 
options are 
available for 
E2200HD and 
M2200HD only. 
For E2400HD and 
M2400HD, AMA is 
always on.