BenQ Dv3251 Users Manual
Here you can view all the pages of manual BenQ Dv3251 Users Manual. The BenQ manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
Table of Contents i English Table of ContentsSection 1: Quick Start Guide ........................................ 1 1. Please read these instructions......................................................................... 2 2. Unpack the display ......................................................................................... 2 3. Select and prepare the installation location .................................................. 3 4. Connect the antenna cable...
Page 2
Table of Contents ii English Using the freeze function ................................................................................... 19 Adjusting aspect ratio ......................................................................................... 19 Using the PIP function ....................................................................................... 19 Using the sleep timer .......................................................................................... 20 Adjusting backlight...
Page 3
Table of Contents iii English Specifications ...................................................................................................... 39 Supported PC (D-Sub/DVI) Input Signal Timing ........................................... 40 Supported Video (Component/DVI) Input Signal Timing ............................. 40 Aspect ratio behaviour ....................................................................................... 41 16:9...
Page 4
Table of Contents iv English DV3251-En.book Page iv Monday, December 12, 2005 4:07 PM Downloaded From TV-Manual.com Manualr
Page 5
We l c o m e English V32S/DV3251/DV3253 LCD Display Section 1: Quick Start Guide DV3251-En-QuickStartGuide.fm Page 1 Tuesday, December 13, 2005 2:03 PM Downloaded From TV-Manual.com Manualr
Page 6
Section 1: Quick Start Guide 2 English 1. Please read these instructions Congratulations on purchasing your BenQ V32S/DV3251/DV3253 LCD Display. You have a state-of-the-art flat widescreen digital LCD di splay which should provide you with years of viewing pleasure. Please take a few minutes to read these quick start instructions through before installing and using the display. What’s in the Quick Start Guide? Section 1 contains the Quick Start Guide which provides you with enough information to setup...
Page 7
Section 1: Quick Start Guide 3 English All LCD screens have a very thin protective layer of glass which is liable to marking or scratching, and cracking if struck or pressured. The liquid crystal substrate is also liable to damage under excessive force or extreme temperatures. Please handle with care. 3. Select and prepare the installation location In order to prevent potential dangers and prolong the service life of the display, please observe the following points when installing, operating and...
Page 8
Section 1: Quick Start Guide 4 English 4. Connect the antenna cable Connect a TV antenna cable fly-lead from your TV antenna system or Cable TV (CATV) to the antenna input on the rear of the display. Check to make sure that all cable connections are correct and firmly in place. For best reception, you should have a properly aligned outdoor antenna system. 5. Connect the power cable 1. Locate the power cable from the packaging, unwrap it, and plug the appropriate end into the AC input socket on the...
Page 9
Section 1: Quick Start Guide 5 English 6. Activate the remote control Locate the remote control and batteries from the packaging, and unwrap them. Remote control usage tips Point and aim the top front of the Remote Control directly at the display when pressing the buttons. Do not cover the sensor window on the front of the display (beside the power indicator lamp), or place objects in front of it which will block the direct line-of-sight between the Remote Control and the display sensor window. • Do...
Page 10
Section 1: Quick Start Guide 6 English Test the remote control 7. Initialise the display When first turned on (and until tuned), the First Turn On menu will display: The display uses the selections you make in this menu to determine which menu language to display and which TV station programs to search for and tune appropriate to the region you selected. This process need only ever be done once. 1. You can use the left, right, up and down buttons on the remote control or the display to...