BenQ Bl3200pt User Manual
Have a look at the manual BenQ Bl3200pt User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Navigating the main menu Display Mode This feature is provided to allow aspect ratios other than 16:9 to be displayed without geometric distortion. The options under Display Mode will be different depending on the input signal sources. Depending on your selection of Picture Mode, different Display Mode option is pre-set. Change the setting if needed. Full Scales the input image to fill the screen. Ideal for 16:9 aspect images. Aspect The input image is displayed without geometric distortion filling as much of the display as possible. 1 : 1 Displays the input image in its native resolution without scaling. 19s Displays the input image as if on a 19 monitor of 5:4 aspect ratio. 22 (16:10) Displays the input image as if on a 22W monitor of 16:10 aspect ratio. 23 Displays the input image as if on a 23W monitor of 16:9 aspect ratio. 24 Displays the input image as if on a 24W monitor of 16:9 aspect ratio. 24 (16:10) Displays the input image as if on a 24W monitor of 16:10 aspect ratio. 27 Displays the input image as if on a 27W monitor of 16:9 aspect ratio. 27 (16:10) Displays the input image as if on a 27W monitor of 16:10 aspect ratio. 30 Displays the input image as if on a 30W monitor of 16:9 aspect ratio. Smart Scaling Adjusts the display size to best suit your needs. 0 ~ 100 ItemFunctionRange
42 Navigating the main menu Color Format Determines the color space ( RGB or YUV) based on the detected video signal. You might need to manually set the Color Format if colors shown on the monitor screen do not display properly. If the input source is HDMI or DP, color format is not selectable. In other words, Color Format is automatically set depending on the input video source. RGB • For D-Sub (VGA) input source from PC. • For DVI input source. YUV For D-Sub (Component converted from VGA) input source from a video device. HDMI RGB PC Range Determines the range of color scales. Select an option that matches the RGB range setting on the connected HDMI device.• RGB (0 ~ 255) • RGB (16 ~ 235) ItemFunctionRange
43 Navigating the main menu Audio menu Available menu options may vary depending on the input sources, functions and settings. Menu options that are not available will become grayed out. And keys that are not available will be disabled and the corresponding OSD icons will disappear. 1. Select ( Menu) from the hot key menu. 2. Use or to select Audio. 3. Select to go to a sub menu, and then use or to select a menu item. 4. Use or to make adjustments, or use to make selection. 5. To return to the previous menu, select . 6. To exit the menu, select . ItemFunctionRange Vo l u m e Adjusts the audio volume. 0 ~ 100 Mute Mutes the audio input. • ON • OFF Audio Select (for models with more than 2 audio sources)Allow users to select the audio source or let the monitor detect it automatically.• PC Audio • Auto Detect 50Display Picture Picture Advanced Audio System Ergonomics Eco Mode: Standard92Volume Mute Audio Select
44 Navigating the main menu System menu Available menu options may vary depending on the input sources, functions and settings. Menu options that are not available will become grayed out. And keys that are not available will be disabled and the corresponding OSD icons will disappear. 1. Select ( Menu) from the hot key menu. 2. Use or to select System. 3. Select to go to a sub menu, and then use or to select a menu item. 4. Use or to make adjustments, or use to make selection. 5. To return to the previous menu, select . 6. To exit the menu, select . 50Display Picture Picture Advanced Audio System Ergonomics Eco Mode: StandardLanguage Display Time OSD Lock5 sec. 10 sec. 15 sec. 20 sec. 25 sec. 30 sec. OSD Settings Custom Key 1 Custom Key 2 Custom Key 3 DDC/CI DP Auto Switch HDMI Auto Switch Auto Power Off
45 Navigating the main menu ItemFunctionRange OSD Settings Language Sets the OSD menu language. The language options displayed on your OSD may differ from those shown on the right, depending on the product supplied in your region. • English • Français • Deutsch • Italiano • Español • Polski • Česky • Magyar • SiCG/BiH/CRO • Română • Nederlands • Русский • Svenska • Português • 日本語 • 繁體中文 • 简体中文 Display Time Adjusts the display time of the OSD menu. • 5 sec. • 10 sec. • 15 sec. • 20 sec. • 25 sec. • 30 sec. OSD Lock Prevents all the monitor settings from being accidentally changed. When this function is activated, the OSD controls and hotkey operations will be disabled. To unlock the OSD controls, press and hold any key for 10 seconds. • YES • NO
46 Navigating the main menu Custom Key 1 Sets the function to be accessed by custom key 1. • Picture Mode • CAD / CAM • Animation • Low Blue Light • Display Mode • Brightness • Contrast • Auto Adjustment • Vo l u m e • Mute • Input • Eye Protect • Eye Protect Meter • ECO Sensor • ECO Sensor Meter • Smart Reminder Custom Key 2 Sets the function to be accessed by custom key 2. Custom Key 3 Sets the function to be accessed by custom key 3. DDC/CI Allows the monitor settings to be set through the software on the PC. DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote diagnostics. • ON • OFF DP Auto Switch When this function is activated, DP port will be in the input auto select loop. Otherwise, DP can only be selected by input select or by hot key.• ON • OFF HDMI Auto Switch When this function is activated, HDMI port will be in the input auto select loop. Otherwise, HDMI can only be selected by input select or by hot key.• ON • OFF Auto Power Off Sets the time to power off the monitor automatically in power saving mode.• OFF • 10min. • 20min. • 30min. Resolution Notice Sets whether to display the resolution notice of the recommended resolution when a new input source is detected by the monitor.• ON • OFF ItemFunctionRange
47 Navigating the main menu Information Displays the current monitor property settings.• Input • Current Resolution • Optimum Resolution (best with the monitor) • Model Name DisplayPort Selects an appropriate DP standard for data transmission. • 1.2 • 1.1 Controller Key 1 Sets the feature or setup menu to be accessed by Controller Key 1.• sRGB • CAD / CAM • Animation • Presentation • Standard • Low Blue Light • Movie • Photo • Eco • M-book • User • Brightness • Vo l u m e • Input Controller Key 2 Sets the feature or setup menu to be accessed by Controller Key 2. Controller Key 3 Sets the feature or setup menu to be accessed by Controller Key 3. Reset All Resets all mode, color and geometry settings to the factory default values.• YES • NO ItemFunctionRange
48 Navigating the main menu Ergonomics menu Available menu options may vary depending on the input sources, functions and settings. Menu options that are not available will become grayed out. And keys that are not available will be disabled and the corresponding OSD icons will disappear. 1. Select ( Menu) from the hot key menu. 2. Use or to select Ergonomics. 3. Select to go to a sub menu, and then use or to select a menu item. 4. Use or to make adjustments, or use to make selection. 5. To return to the previous menu, select . 6. To exit the menu, select . Display Picture Picture Advanced Audio System Ergonomics Eco Mode: Standard Eye Protect Eye Protect meter Smart Reminder Time Interval (min.) Duration (sec.)ON OFF ItemFunctionRange Eye Protect Your monitor comes with a light sensor, which detects the light condition around the monitor and adjusts the monitor backlight automatically. This is to protect your eyes from overexposure to bright light. If the light is sufficient, the monitor brightness is increased. If the monitor is in a poor light, the monitor brightness is decreased. If you prefer to adjust the monitor brightness manually, go to PICTURE > Brightness. • ON • OFF Eye Protect Meter Sets to display the light condition around the monitor on the screen.• ON • OFF
49 Navigating the main menu Smart Reminder Decides to display the pop-up message that reminds you to rest your eyes.• ON • OFF Time interval (min.) Sets the interval of the reminder message. • 20 • 40 • 60 • 80 • 100 Duration (sec.) Sets the time the reminder message lasts on the screen. Alternatively, when the reminder message is displayed, press any key except the power button to hide the message. • 5 • 10 • 15 • 20 • 25 ItemFunctionRange
50 Navigating the main menu Eco menu Available menu options may vary depending on the input sources, functions and settings. Menu options that are not available will become grayed out. And keys that are not available will be disabled and the corresponding OSD icons will disappear. 1. Select ( Menu) from the hot key menu. 2. Use or to select Eco. 3. Select to go to a sub menu, and then use or to select a menu item. 4. Use or to make adjustments, or use to make selection. 5. To return to the previous menu, select . 6. To exit the menu, select . Display Picture Picture Advanced Audio System Ergonomics Eco Mode: Standard ECO Sensor ECO Sensor Meter Sensor RangeON OFF ItemFunctionRange ECO Sensor Your monitor comes with a proximity sensor (called ECO sensor), which detects your presence in front of the monitor within the set range. If the sensor detects no presence, the monitor is turned off in 40 seconds to save power. If the monitor is turned off by the ECO sensor, the power button flashes in green. If the ECO sensor detect no presence for over 2 hours, the monitor will be powered off. Press the power button to turn on the monitor. • ON • OFF