BenQ Bl3200pt User Manual

							BL Series
LCD Monitor
User Manual
 
						

							2   
Copyright
Copyright © 2014 by BenQ Corporation. All rights reserved. No part of this publication may 
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any 
language or computer language, in any form or by any means, electronic, mechanical, magnetic, 
optical, chemical, manual or otherwise, without the prior written permission of BenQ 
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to the contents hereof and specifically disclaims any warranties, merchantability or 
fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this 
publication and to make changes from time to time in the contents hereof without obligation of 
BenQ Corporation to notify any person of such revision or changes.
The performance of flicker-free may be affected by external factors such as poor cable quality, 
unstable power supply, signal interference, or poor grounding, and not limited to the above 
mentioned external factors. (Applicable for flicker-free models only.)
Power Safety
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The 
socket outlet should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you 
are not sure of the type of power available, consult your dealer or local power company.
• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm
2 must 
be used.
Care And Cleaning
• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD 
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass 
cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be 
blocked or covered. Your monitor should never be placed near or over a radiator or heat 
source, or in a built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.
Please follow these safety instructions for best performance, and long life for your monitor.
 
						

							  3
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose 
you to dangerous voltages or other risks. If any of the above mentioned misuse or other 
accident such as dropping or mishandling occurs, contact qualified service personnel for 
servicing.
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its 
aspiration to realize the ideal of the Bringing Enjoyment N Quality to Life corporate vision 
with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory 
requirement and standards pertaining to environmental management, BenQ has spared no 
efforts in pushing our initiatives further to incorporate life cycle design in the aspects of 
material selection, manufacturing, packaging, transportation, using and disposal of the products. 
BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure 
that consumers make informed green choices at purchase. Check out BenQs CSR Website at 
http://csr.BenQ.com/ for more details on BenQs environmental commitments and 
achievements.
 
						

							4   
Table of Contents
Copyright ......................................................................................................................................2
Getting started  .............................................................................................................................5
Getting to know your monitor ................................................................................................7
Front view ....................................................................................................................................................  7
Back view  ....................................................................................................................................................  7
Connection ...................................................................................................................................................9
How to assemble your monitor hardware ........................................................................ 10
How to detach the stand and the base ............................................................................................... 16
Adjusting the monitor height  ................................................................................................................ 18
Rotating the monitor  .............................................................................................................................. 19
Viewing angle adjustment.......................................................................................................................  20
Using the monitor wall mounting kit ................................................................................................... 21
Getting the most from your BenQ monitor ...................................................................... 22
How to install the monitor on a new computer  .............................................................................. 23
How to upgrade the monitor on an existing computer  ................................................................. 24
How to install on Windows 8 (8.1) system (selected models only) ............................................ 25
How to install on Windows 7 system  ................................................................................................ 26
How to adjust your monitor ................................................................................................. 27
The control panel.....................................................................................................................................  27
OSD Controller  ....................................................................................................................................... 28
Basic menu operation  ............................................................................................................................. 30
Picture optimization  ................................................................................................................................ 32
Customizing the hot keys.......................................................................................................................  32
Adjusting display mode ...........................................................................................................................  32
Using Smart Scaling ..................................................................................................................................  33
Choosing an appropriate picture mode ..............................................................................................  33
Connecting the monitor to your MacBook series product ...........................................................  33
Navigating the main menu ......................................................................................................34
Display menu ............................................................................................................................................. 35
Picture menu  ............................................................................................................................................. 37
Picture Advanced menu  ......................................................................................................................... 39
Audio menu  ............................................................................................................................................... 43
System menu  ............................................................................................................................................. 44
Ergonomics menu  .................................................................................................................................... 48
Eco menu  ................................................................................................................................................... 50
Troubleshooting ....................................................................................................................... 52
Frequently asked questions (FAQ) ......................................................................................................  52
Need more help?......................................................................................................................................  54
 
						

							  5   Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, 
please contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Stand
Monitor Base
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product supplied 
for your region.)
Video Cable: D-Sub 
 
						

							6  Getting started  
Video Cable: DVI-D Dual Link
Video Cable: DP
Video Cable: HDMI
Adapter: DP to mini DP
(Optional accessory, sold separately)
Audio Cable
USB Cable
OSD Controller
Wire Holder
• Available accessories and the pictures shown here may differ from the actual contents and the product supplied 
for your region. For cables that are not supplied with your product, you can purchase them separately.
• Consider keeping the box and packaging in storage for use in the future when you may need to transport the 
monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children. 
 
						

							  7   Getting to know your monitor
Getting to know your monitor
Front view
Back view 
1.  Light sensor / Eco sensor
2.  Control buttons
3.  Power button
123
4.  Wire holder socket
5.  USB 3.0 ports (upstream; 
connecting to the PC)
6.  OSD Controller socket
7.  USB 2.0 ports (downstream; 
connecting to USB devices)
8.  Audio Line In
9.  Cable management hole
10. AC power input jack
11. Power switch
12. Kensington lock slot
4
11 91256 7 8 10
 
						

							8  Getting to know your monitor  
13. DisplayPort socket
14. D-Sub socket
15. DVI-D socket
16. HDMI socket
17. SD card slot
18. USB 3.0 ports (downstream; 
connecting to USB devices)
19. Headphone jack
20. Quick release button
• Above diagram may vary depending on the model.
• Picture may differ from product supplied for your region.
13
14
15
16
17
18
19
20
 
						

							  9   Getting to know your monitor
Connection
The following connection illustrations are for your reference only. For cables that are not 
supplied with your product, you can purchase them separately.
For detailed connection methods, see page 11 - 14.
Speakers PC/Notebook
USB peripherals
(USB 2.0) SD card (*)
USB peripherals (USB 3.0)Adapter: 
DP to mini DP
*: Requires card reader driver for Windows 8.1 operating system. Install the driver from the supplied CD.
 
						

							10  How to assemble your monitor hardware  
How to assemble your monitor hardware
 • If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on 
the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor 
around on your desk will scratch or damage the monitor surround and controls. 
Protect the monitor and screen by clearing a flat open 
area on your desk and placing a soft item like the 
monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded 
surface.
Attach the monitor stand to the monitor base as 
illustrated. Make sure to align the arrow on the end of 
the stand to the one on the monitor.
Turn the stand clockwise until you cannot go further.
4545O45O