BenQ Bl2400pt User Manual

  11   How to assemble your monitor hardware
To Connect the DP Cable
Connect the plug of the DP cable to the monitor video 
socket. Connect the other end of the cable to the computer 
video socket.
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or 
projectors. The digital video signals produce a superior 
quality picture than analog video signals.
The video cables included in your package and the socket 
illustrations on the right may vary depending...

12  How to assemble your monitor hardware  
5. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
‘POWER IN’ on the rear of the monitor. Do not connect 
the other end to a power outlet just yet. 
6. Route the cables via the cable clip.
7. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the...

  13   How to assemble your monitor hardware
Adjusting the monitor stand height
If you prefer to lower the monitor stand height, push the 
stand downward while holding both left and right sides of 
the monitor.
Avoid placing hands near the bottom of the monitor stand 
as the descending stand might cause personal injuries. 
Keep children out of reach of the monitor while performing 
this operation.
To extend the monitor stand to a higher position, press 
the lower part of the height release on the stand...

14  How to assemble your monitor hardware  
Rotating the monitor
1. Pivot the display.
Before rotating the monitor with a portrait viewing 
orientation, the display has to be rotated 90 degrees.
Go to Start and Control Panel on your computer, select 
the properties or controller of the graphics processing 
units (GPU) on your computer. Select to rotate the display 
90 degrees, and follow the on-screen instructions to 
complete the settings.
Refer to the product specifications of your computer to 
find...

  15   How to assemble your monitor hardware
Viewing angle adjustment
You may position the screen to the desired angle with -5° to +20° monitor tilt, 90° (left and right 
total) monitor swivel, and 130 mm monitor height.
-45-45O O ~ +45~ +45O-45O ~ +45O
-5O~ +20O
130 mm
 

16  How to assemble your monitor hardware  
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the 
power cable. Turn off the computer before unplugging the 
monitor signal cable.
Protect the monitor and screen by clearing a flat open area 
on your desk and placing a soft item like a towel on the 
desk for padding, before laying the screen face down on a 
flat clean padded surface.
Please be careful to prevent damage to the monitor. 
Placing...

  17   How to assemble your monitor hardware
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the 
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit, please 
read the precautions carefully.
Precautions:
•Install your monitor and monitor mounting kit on a wall with flat surface.
•Ensure that the wall material is stable to support the weight of the monitor.
•Turn off the monitor and the power...

18  Getting the most from your BenQ monitor  
4. Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install 
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will determine 
which process you need to follow to successfully install the BenQ LCD Monitor driver software. 
These circumstances relate to which version of...

  19   Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that...

20  Getting the most from your BenQ monitor  
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is currently tested as compatible for Windows 8, 
Windows 7, and Windows Vista, and Windows XP Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done...