BEKO WMD 75120 User Manual

WMD 75120 
WMD 75100 
WMD 75080
Washing Machine
Plně automatická pračka
Automatická pračka Pralka automatyczna
Downloaded From WashingMachine-Manual.com Manualš 

2 - EN
1 Warnings
General Safety•  Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.
•  If the power cable or mains plug is 
damaged you must call Authorized Service for repair.
•  Fit the drain hose into the discharge 
housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the...

3 - EN
2 Installation
Removing packaging 
reinforcementTilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
Opening the transportation locksA  Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!
1.  Loosen all the bolts with a spanner until 
they rotate freely (“C”)
2.  Remove transportation safety bolts by 
turning them gently.
3.  Fit the covers (supplied in the bag with...

4 - EN
long you may have it shortened.
•  The maximum length of the combined 
hoses must not be longer than 3.2 m.
Electrical connectionConnect the machine to an earthed outlet protected by a fuse of suitable capacity.
Important:
•   Connection should comply with national 
regulations.
•   The voltage and the allowed fuse 
protection are specified in the section “Technical Specifications”.
•   The specified voltage must be equal to 
your mains voltage.
•   Connection via extension cords or multi-
plugs...

5 - EN
7.a  -  Spin Speed Indicator
7.b  -  Temperature Indicator
7.c  -  Spin Symbol
7.d  -  Temperature Symbol
7.e  -  Remaining Time and Delaying Time 
Indicator
7.f  -  Programme Indicator Symbols (pre-
wash/main wash/rinse/softener/spin)
7.g  -  Economy Symbol
7.h  -  Time Delaying Symbol
7.i  -  Door Locked Symbol
7.j  -  Start Symbol
7.k  -  Standby Symbol
7.l  -  Auxiliary Function Symbols
4  Selecting a Program and Operating Your Machine
Control panelFigure 1
8
645d5c5b5a2
173
1  -  Spin Speed...

6 - EN
Main programs Depending on the type of textile, the following main programs are available:
•CottonsYou can wash your durable clothes with this program. Your laundry will be washed with vigorous washing movements during a longer washing cycle.
•IntensiveYou can wash your durable and heavily soiled clothes on this program. In this program, your clothes will be washed for a longer time and an extra rinse cycle will be made compared to the “Cottons” program.
• MiniThis program is used to quickly wash...

7 - EN
Rinse hold is shown with “” and no spin is 
shown with “” symbols.
If you do not want to unload your clothes immediately after the program, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition. With this function, your laundry is kept in the final rinsing water. If you want to 
spin your laundry after the rinse hold function:
-   Adjust the spin speed.
-   Press “Start/Pause/Cancel” button. 
Program resumes. Your machine drains the water...

8 - EN
Auxiliary functionsAuxiliary Function Selection ButtonsC Select the required auxiliary functions before starting the program.C Some combinations cannot be selected together. (Ex.: Pre-wash) (Figure 1-5a) and Quick Wash (Figure 1-5b).
Auxiliary function selectionIf an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
(Ex.: If you want to...

9 - EN
brought to the appropriate position, rpm and temperature data reappear.
Switching the machine to standby 
modePress “Start/Pause/Cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be added / taken out by opening the door.
Door lockThe Door Locked Symbol (Figure 2-7i) lights up when the loading door is locked. This...

10 - EN
Draining any remaining water and 
cleaning the pump filterYour product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water.
•   If your machine fails to drain the water, 
the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump...