BEKO WMB 91242LC User Manual

Washing Machine
Стиральная машина
WMB 91242 LC
 

2EN
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure.
Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well.
The user manual will help you use your machine in a 
fast and safe way.
• Read the user...

3EN
TABLE OF CONTENTS
1 Your washing machine  4
Overview. . . . . . . . . . . . . . . . . . . . . . .4
Technical specifications. . . . . . . . . . . .5
2 Warnings  6
General Safety. . . . . . . . . . . . . . . . . . .6
First Use  . . . . . . . . . . . . . . . . . . . . . . .6
Intended use. . . . . . . . . . . . . . . . . . . .6
Safety instructions. . . . . . . . . . . . . . . .7
If there are children in your house.... . .7
3  Installation  8
Appropriate installation location. . . . . .8
Removing...

4EN
1 Your washing machine
Overview
73
4
6
5
2
18
1- Power cable
2- Top panel
3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door
7- Detergent drawer
8- Drain hose
  

5EN
Models
Maximum dry laundry capacity (kg)
Height (cm)
Width (cm)
Depth (cm)
Net weight (±4 kg.)
Electrical input (V/Hz)
Total current (A)
Total power (W)
Spin speed (rpm max.)
Technical specifications
C Technical specifications may be changed without prior notice to improve the quality of the product.
C Figures in this manual are schematic and may not match the product exactly. 
C Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in...

6EN
2 Warnings
Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void.
General Safety
• Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.
• If the power cable or mains plug is damaged you must call Authorized Service for repair.
• Check...

7EN
concerning use of the appliance by a person responsible for their safety.
Safety instructions
• This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity.
• The supply and draining hoses must always be securely fastened and remain in an undamaged state.
• Fit the draining hose to a washbasin or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures!
• Never open the door or remove the filter while...

8EN
3 Installation
Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
C Preparation of the location and electrical, tap water and waste water installations at...

9EN
3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)
C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
C Never move the product without the transportation safety bolts properly fixed in place!
Connecting water supply
C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 10 MPa). It is necessary to have 10 – 80 liters of water flowing from the...

10EN
• The hose should be attached to a height of at least 40 cm, and 100 cm at most.
• In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
• To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the...