BEKO WMB 81241 LMS User Manual
Here you can view all the pages of manual BEKO WMB 81241 LMS User Manual. The Beko manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.
Page 1
Washing Machine Plně automatická pračka Perilica rublja Перална машинаWMB 81241 LMB WMB 81241 LMS WMB 81241 LMA WMB 81241 LM
Page 2
2 - EN 1 Warnings General Safety• Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorized Service for repair. • Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that...
Page 3
3 - EN 2 Installation Removing packaging reinforcementTilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks A Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loosen all the bolts with a spanner until they rotate freely (“C”) 2. Remove transportation safety bolts by turning them gently. 3. Fit the covers (supplied in the bag with...
Page 4
4 - EN 3 Initial preparations for washing Preparing clothes for washingLaundry items with metal attachments such as, bras, belt buckles and metal buttons will damage the machine. Remove metal attachments or place the items in a clothing bag, pillow case, or something similar. • Sort the laundry according to type of fabric, color, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels. • Place small items like infants’ socks and nylon stockings,...
Page 5
5 - EN Display symbols a - Spin Symbol b - Spin Speed Indicator c – Water cut-off symbol (According to your machine’s model) d - Economy Symbol e - Temperature Indicator f - Temperature Symbol g - Door Locked Symbol h - Standby Symbol i - Start Symbol j - Auxiliary Function Symbols k - Remaining Time and Delaying Time Indicator l - Program Indicator Symbols (pre-wash/main wash/rinse/softener/spin) m - Time Delaying Symbol F1F2F3F4 a b c de f g h i j k l m Turning the machine on Plug in...
Page 6
6 - EN synthetic/cotton blended garments, etc.). For curtains and lace, the “Synthetic 40” program with pre-wash and anti-creasing functions selected is recommended. Detergent should not be put in the pre-wash compartment. Less detergent should be put in the main wash compartment as loose knit fabrics (lace) foam too much due to its meshed structure. • Woollens You can wash your machine-washable woolen garments on this program. Wash by selecting the proper temperature according to the labels of...
Page 7
7 - EN temperature anticipated for that program appears on the temperature indicator. To change the temperature, press the temperature button. Temperature decreases in 10° increments. Cold selection is shown with “-” symbol. 90˚C Normally soiled, white cottons and linens. (Ex.: coffee table covers, tablecloths, towels, bed sheets) 60˚C Normally soiled, fade proof colored linens, cottons or synthetic clothes (Ex.: shirts, nightgowns, pajamas) and lightly soiled white linen clothes (Ex.:...
Page 8
8 - EN Program and consumption table • : Selectable * : Automatically selected, not cancellable. ** : Energy Label program (EN 60456) *** If maximum spin speed of your machine is lower, selection may be made until maximum spin speed. - : See program description for maximum load. C The auxiliary functions in the table vary according to the model of your machine. C Water and power consumption and program duration differ from the table subject to changes in water pressure, water hardness and temperature,...
Page 9
9 - EN Auxiliary functionsAuxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active. Ex.: If you want to select pre-wash first and then quick wash, pre-wash will be cancelled and quick wash will remain active. Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection...
Page 10
10 - EN the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door. Door lock The Door Locked Symbol lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out. Child-proof lock Protect the appliance from being...