Home > Beko > Washing Machine > BEKO WMB 81241 LMS User Manual

BEKO WMB 81241 LMS User Manual

Here you can view all the pages of manual BEKO WMB 81241 LMS User Manual. The Beko manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.

Page 1

Washing Machine
Plně automatická pračka  
Perilica rublja 
Перална машинаWMB 81241 LMB
WMB 81241 LMS
WMB 81241 LMA
WMB 81241 LM
 

Page 2

2 - EN
1 Warnings
General Safety•	 Never	place	your	machine	on	a	carpet	covered	floor.	Otherwise,	lack	of	airflow	from	
below	of	your	machine	may	cause	electrical	
parts	to	overheat.	This	may	cause	problems	
with	your	washing	machine.
•	 If	the	power	cable	or	mains	plug	is	damaged	 you	must	call	Authorized	Service	for	repair.
•	 Fit	the	drain	hose	into	the	discharge	housing	 securely	to	prevent	any	water	leakage	and	
to	allow	machine	to	take	in	and	discharge	
water	as	required.	It	is	very	important	that...

Page 3

3 - EN
2 Installation
Removing packaging reinforcementTilt	the	machine	to	remove	the	packaging	
reinforcement.	Remove	the	packaging	
reinforcement	by	pulling	the	ribbon.
Opening the transportation locks
A	Transportation	safety	bolts	must	be	removed	before	operating	the	washing	machine!	
Otherwise,	the	machine	will	be	damaged!
1.	 Loosen	all	the	bolts	with	a	spanner	until	they	 rotate	freely	(“C”)
2.	 Remove	transportation	safety	bolts	by	turning	 them	gently.
3.	 Fit	the	covers	(supplied	in	the	bag	with...

Page 4

4 - EN
3 Initial preparations for washing
Preparing clothes for washingLaundry	items	with	metal	attachments	such	as,	
bras,	belt	buckles	and	metal	buttons	will	damage	
the	machine.	Remove	metal	attachments	or	
place	the	items	in	a	clothing	bag,	pillow	case,	or	
something	similar.
•	 Sort	the	laundry	according	to	type	of	fabric,	color,	and	degree	of	soiling	and	permissible	
water	temperature.	Always	follow	the	advice	
on	the	garment	labels.
•		 Place	small	items	like	infants’	socks	and	nylon	 stockings,...

Page 5

5 - EN
Display symbols
a	 -	Spin	Symbol
b	 -	Spin	Speed	Indicator
c		–		Water	cut-off	symbol	(According	to	your	machine’s	model)
d	 -	Economy	Symbol
e	 -	Temperature	Indicator
f	 -	Temperature	Symbol
g	 -	Door	Locked	Symbol
h	 -	Standby	Symbol
i	 -	Start	Symbol
j	 -	Auxiliary	Function	Symbols
k	 -	Remaining	Time	and	Delaying	Time	Indicator
l	 -	Program	Indicator	Symbols	(pre-wash/main	 wash/rinse/softener/spin)
m	 -	Time	Delaying	Symbol
F1F2F3F4
a b c de f
g
h
i
j
k
l
m
Turning the machine on
Plug	in...

Page 6

6 - EN
synthetic/cotton	blended	garments,	etc.).	For	
curtains	and	lace,	the	“Synthetic	40”	program	with	
pre-wash	and	anti-creasing	functions	selected	is	
recommended.	Detergent	should	not	be	put	in	the	
pre-wash	compartment.	Less	detergent	should	be	
put	in	the	main	wash	compartment	as	loose	knit	
fabrics	(lace)	foam	too	much	due	to	its	meshed	
structure.
• Woollens
You	can	wash	your	machine-washable	woolen	
garments	on	this	program.	Wash	by	selecting	the	
proper	temperature	according	to	the	labels	of...

Page 7

7 - EN
temperature	anticipated	for	that	program	
appears	on	the	temperature	indicator.
To	change	the	temperature,	press	the	
temperature	button.	Temperature	decreases	in	
10°	increments.
Cold	selection	is	shown	with	“-”	symbol.
90˚C	Normally	soiled,	white	cottons	and	
linens.	(Ex.:	coffee	table	covers,	
tablecloths,	towels,	bed	sheets)
60˚C	 Normally	soiled,	fade	proof	colored	
linens,	cottons	or	synthetic	clothes	
(Ex.:		shirts,	nightgowns,	pajamas)	
and	lightly	soiled	white	linen	clothes	
(Ex.:...

Page 8

8 - EN
Program and consumption table
•	:	Selectable
*	:	Automatically	selected,	not	cancellable.
**	:	Energy	Label	program	(EN	60456)
	***	If	maximum	spin	speed	of	your	machine	is	lower,	selection	may	be	made	until	maximum	spin	speed.
-	:	See	program	description	for	maximum	load.
C	 The	auxiliary	functions	in	the	table	vary	according	to	the	model	of	your	machine.
C	 Water	and	power	consumption	and	program	duration	differ	from	the	table	subject	to	changes	in	water	pressure,	water	hardness	and	temperature,...

Page 9

9 - EN
Auxiliary functionsAuxiliary function selection
If	an	auxiliary	function	that	should	not	be	selected	
together	with	a	previously	selected	function	is	
chosen,	the	first	selected	function	will	be	cancelled	
and	the	last	auxiliary	function	selection	will	remain	
active.
Ex.:	If	you	want	to	select	pre-wash	first	and	then	
quick	wash,	pre-wash	will	be	cancelled	and	quick	
wash	will	remain	active.
Auxiliary	function	that	is	not	compatible	with	the	program	cannot	be	selected.	(see,	“Program	
Selection...

Page 10

10 - EN
the	door	is	suitable	for	opening.	This	symbol	will	
fade	out	as	soon	as	the	door	is	allowed	to	open.	
Laundry	may	be	added	/	taken	out	by	opening	the	
door.
Door lock
The	Door	Locked	Symbol	lights	up	when	the	
loading	door	is	locked.	This	symbol	will	flash	until	
the	door	is	allowed	to	open.	Do	not	force	the	door	
at	this	stage.	This	symbol	will	fade	out	as	soon	as	
the	door	is	allowed	to	open.	You	may	open	the	
door	after	the	symbol	fades	out.
Child-proof lock
Protect	the	appliance	from	being...
Start reading BEKO WMB 81241 LMS User Manual

Related Manuals for BEKO WMB 81241 LMS User Manual

All Beko manuals