Beko Wmb 71242 M Manual

41 / EN
you the opportunity for a more economical wash. This feature is available for certain models having remaining time display.• Anti-allergicUse this programme to wash baby laundry, and the laundry that belongs to allergic persons. Longer heating time and an additional rinsing step provide a higher level of hygiene. • Hand washUse this programme to wash your woolen/delicate clothes that bear “not machine- washable” tags and for which hand wash is recommended. It washes laundry with a very gentle...

42 / EN
Economy symbolIndicates the programmes and temperatures that provide energy savings.
C
NOTE : Economy symbol can not be selected in Intensive and Hygiene programmes since washing is performed in long times and at high temperatures in order to provide hygiene. Similarly, Economy symbol can not be selected in Baby, Refresh, Drum Cleaning, Spin and Rinse programmes as well.
Indicative values for Synthetics programmes (EN)
Load (kg)Water Consumption (l)Energy Consumption (kWh)Programme Duration (min)...

43 / EN
4.10 Programme and consumption table
• : Selectable* : Automatically selected, no cancelling.** : Energy Label programme (EN 60456 Ed.3) *** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.- : See the programme description for maximum load.
** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the       symbols on the...

44 / EN
4.11 Auxiliary function selectionSelect the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / Cancel button when the machine is operating. 
For this, the machine must be in a step before the auxiliary function you are going to select or cancel.
abc d
Depending on the programme, press a, b, c or d buttons to select the desired auxiliary function. Symbol...

45 / EN
4.12 Time displayRemaining time to complete the programme appears on the display while the programme is running. Tim is displayed as “01:30” in hours and minutes format.
C
NOTE : Programme time may differ 
from the values in the “Programme and consumption table” depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage.
Delayed startWith the Delayed Start function the...

46 / EN
4.15 Loading door lockThere is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.Door Locked symbol appears when the loading door is locked. This symbol will flash until the loading door 
becomes ready to open when programme completes or the machine is paused. Do not force to open the loading door in this step. Symbol disappears when the door is ready to open. You can open the door when the symbol disappears.
4.16...

47 / EN
4.20 End of programme“End” appears on the display at the end of the programme. Symbols of the programme steps remain lit. Auxiliary function, spin speed and temperature that were selected at the beginning of the programme remain selected.
4.21 Your machine is equipped with a 
“Standby Mode”In case of not starting any programme or waiting without making any other operation when the machine is turned on by On/Off button and while it is in selection step or if no other operation is\
 performed...

48 / EN
CNOTE :  Lift the rear part of the siphon to remove it as illustrated. After performing the above mentioned cleaning procedures, replace the siphon back to its seating and push its front section downwards to make sure that the locking tab engages.
5.2 Cleaning the loading door and the drumFor products with drum cleaning programme, please see Operating the product - Programmes.For products without drum cleaning, follow the below steps to clean the drum: Select Additional Water or Extra Rinse...

49 / EN
5.5 Draining remaining water and cleaning 
the pump filterThe filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged 
without any problem and the service life of the pump will extend.If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump...

50 / EN
6 Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademarkBeko
Model nameWMB71242 M
Rated capacity (kg) 7
Energy efficiency class /  Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)A++
Annual Energy Consumption (kWh) (1)196
Energy consumption of the standard 60°C cotton programme at full load  (kWh)1.001
Energy consumption of the standard 60°C cotton programme at partial load  (kWh)0.767
Energy consumption of the standard 40°C...