Home > Beko > Washing Machine > Beko Wmb 71242 M Manual

Beko Wmb 71242 M Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Beko Wmb 71242 M Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 187 Beko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							41 / EN
    you the opportunity for a more economical wash. This feature is available for certain models having remaining time display.• Anti-allergicUse this programme to wash baby laundry, and the laundry that belongs to allergic persons. Longer heating time and an additional rinsing step provide a higher level of hygiene. • Hand washUse this programme to wash your woolen/delicate clothes that bear “not machine- washable” tags and for which hand wash is recommended. It washes laundry with a very gentle washing action to not to damage clothes.• Daily expressUse this programme to wash your lightly soiled cotton clothes in a short time.• Super short expressUse this programme to wash your little amount of lightly soiled cotton clothes in a short time.• DarkcareUse this programme to wash your dark coloured laundry or the laundry that you do not want it get faded. Washing is performed with little mechanic action and at low temperatures. It is recommended to use liquid detergent or woolen shampoo for dark coloured laundry.•  Mix 40Use this programme to wash your cotton and synthetic clothes together without sorting them.• Shirts
    Use this programme to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.• Freshen UpUse this programme to remove the odour on the laundry that are worn only for once and do not contain any stains or dirt.• Eco CleanUse this programme, which is much more sensitive to environment and natural resources, to wash your lightly soiled and unstained cotton laundry (max. 3.5 kg) in a short time and economically. 
    C
    NOTE : It is recommended to use liquid detergent or gel washing detergent.
    • Self CleanUse this programme regularly (once in every 1-2 months) to clean the drum and provide the required 
    hygiene. Run the programme without any laundry in the machine. To obtain better results, put powder limescale remover for washing machines into the detergent compartment II. When the programme is over, leave the loading door ajar so that the inside of the machine gets dry. 
    C
    NOTE : This is not a washing programme. It is a maintenance programme.
    NOTE : Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is a load inside and aborts the programme.
    4.7 Special programmesFor specific applications, select any of the following programmes.• RinseUse this programme when you want to rinse or starch separately.• Spin + DrainUse this programme to apply an additional spin cycle for your laundry or to drain the water in the machine.Before selecting this programme, select the desired spin speed and press Start / Pause / Cancel button. The machine will spin the laundry with the set spin speed and drain the water coming out of them.If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause / 
    Cancel button.
    C
    NOTE : Use a lower spin speed for delicate laundries.
    4.8 Temperature selectionWhenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator.To decrease the temperature, press the Temperature Adjustment button. Temperature decreases with increments of 10° and finally, “-” symbol indicating the cold wash option appears on the display.
    C
    NOTE : If you scroll to cold wash option and press Temperature Adjustment button again, the recommended temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature.
    Washing Machine / User’s Manual  
    						
    							42 / EN
    Economy symbolIndicates the programmes and temperatures that provide energy savings.
    C
    NOTE : Economy symbol can not be selected in Intensive and Hygiene programmes since washing is performed in long times and at high temperatures in order to provide hygiene. Similarly, Economy symbol can not be selected in Baby, Refresh, Drum Cleaning, Spin and Rinse programmes as well.
    Indicative values for Synthetics programmes (EN)
    Load (kg)Water Consumption (l)Energy Consumption (kWh)Programme Duration (min) *
    Remaining Moisture Content (%) **Remaining Moisture Content (%) **
    ≤ 1000 rpm> 1000 rpm
    Synthetics 603451.0990ı -120ı4540
    Synthetics 403450.4570ı -100ı4540
    * You can see the washing time of the programme you have selected \
    on the display of the machine. It is normal that small differences may occur between the time shown on the display and\
     the real washing time.
    ** Remaining moisture content values may differ according\
     to the selected spin speed.
    4.9 Spin speed selectionWhenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator.To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. 
    Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function selection" section for explanations of these options.
    C
    NOTE : Rinse Hold option is indicated with “” symbol and No Spin option is indicated with “” symbol.
    Dark wash(Darkcare) Dark wash
    (Darkcare) Cottons
    Pre-wash Main 
    wash Rinse
    WashSpin
    Drain
    (Pump) Anti-
    creasing Duvet
    (Bedding) Child-
    proof lock Hand 
    Wash BabyProtect
    Cotton 
    Eco Woollens Delicate
    Pet hair
    removal
    PHR +
    Daily
    Lingerie
    expres 14 
    Super short 
    express
    Daily 
    express Rinse hold
    Start/
    Pause No spin
    Quick 
    wash Finished
    Cold Self 
    Clean
    Temperature
    Super 40 Extra rinse
    (Rinse Plus) Freshen 
    up Jeans
    SportTime delay Intensive
    Fasihon
    care
    Mixed 40
    (Mix40)Shirts
    mini 30
    Eco Clean
    Anti-
    allergic
    On/Off
    Door Ready
    BabyProtect +
    Synthetics
    Washing Machine / User’s Manual  
    						
    							43 / EN
    4.10 Programme and consumption table
    • : Selectable* : Automatically selected, no cancelling.** : Energy Label programme (EN 60456 Ed.3) *** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.- : See the programme description for maximum load.
    ** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the       symbols on the panel.
    C
    NOTE : The auxiliary functions in the table may vary according to the model of your machine.
    NOTE : Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
    NOTE : You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. “Selectability of auxiliary functions might be changed by the manufacturer. New selectabilities might be added or existing ones might be removed.”“The spin speed of your machine may vary among the programmes, however this speed cannot exceed the max. spin speed of your machine.”
    EN2Auxiliary functions
    Programme (°C)
    Max. Load (kg)Water Consumption (l)Energy Consumption (kWh)Max. Speed***PrewashQuick WashRinse PlusAnti-CreasingRinse Hold
    Selectable temperature range 
    °C
    Cottons907702.101600•••••90-Cold
    Cottons607701.401600•••••90-Cold
    Cottons407700.701600•••••90-Cold
    BabyProtect907702.001600*•90-30
    Cotton Economic60**7481.001600•60-Cold
    Cotton Economic60**3.5390.771600•60-Cold
    Cotton Economic40**3.5390.751600•60-Cold
    Cotton Economic407600.841600•60-Cold
    Synthetics603451.091200•••••60-Cold
    Synthetics403450.451200•••••60-Cold
    Eco Clean203.5350.161600•20
    Mixed 40 (Mix 40)403450.501200•••••40-Cold
    Shirts403450.50800•••*•60-Cold
    Super short express302350.101400••30-Cold
    Daily express907601.801400••90-Cold
    Daily express607601.001400••90-Cold
    Daily express307700.201400••90-Cold
    Woollens401.5420.201200••40-Cold
    Hand wash301300.15120030-Cold
    Darkcare403650.551200*•40-Cold
    Self Clean70-901.70800*70
    Freshen Up-2200.031200•-
    Washing Machine / User’s Manual  
    						
    							44 / EN
    4.11 Auxiliary function selectionSelect the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / Cancel button when the machine is operating. 
    For this, the machine must be in a step before the auxiliary function you are going to select or cancel.
    abc d
    Depending on the programme, press a, b, c or d buttons to select the desired auxiliary function. Symbol of the selected auxiliary function appears on the display.
    C
    NOTE : Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Prewash, Prewash will be canceled and Quick Wash will remain active.
    NOTE : An auxiliary function that is not compatible with the programme cannot be selected. (See “Programme and consumption table”)
    NOTE : Auxiliary Function buttons may vary according to the model of the machine.
    • PrewashA Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.F1 appears on the display when you select this function (a).• Quick WashThis function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the number of rinsing steps for lightly soiled laundry.F2 appears on the display when you select this function (b).
    C
    NOTE : When you select this function, load your machine with half of the maximum laundry specified in the programme table.
    • Rinse PlusThis function enables the machine to make another rinsing in addition to the one already made after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent remnants on the laundry can be reduced.F3 appears on the display when you select this function (c).• Anti-CreasingThis function creases the clothes lesser when they are being washed. Drum movement is reduced and spinning speed is limited to prevent creasing. In addition, washing is done with a higher water level.F4 appears on the display when you select this function (d).• Rinse Hold)If you are not going to unload your clothes immediately after the programme completes, you may use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause /Cancel button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water.If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause / Cancel button.The programme resumes. Water is drained, laundry is spun and the programme is completed.
    Washing Machine / User’s Manual  
    						
    							45 / EN
    4.12 Time displayRemaining time to complete the programme appears on the display while the programme is running. Tim is displayed as “01:30” in hours and minutes format.
    C
    NOTE : Programme time may differ 
    from the values in the “Programme and consumption table” depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage.
    Delayed startWith the Delayed Start function the startup of the programme may be delayed up to 24 hours. Delayed start time can be increased by increments of 30 minutes. 
    C
    NOTE : Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes.
    Open the loading door, place the laundry and put detergent, etc. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. Set the desired delayed start time by pressing the Delayed Start + or - buttons. Delayed Start symbol flashes. Press Start / Pause / Cancel button. Delayed start countdown starts. Delayed Start symbol illuminates steadily. Start symbol appears. “:” sign in the middle of the delayed start time on the display starts flashing.
    C
    NOTE : Additional laundry may be loaded during the delayed start period. At the end of the countdown, Delayed Start symbol disappears, washing cycle starts and the time of the selected programme appears on the display.
    Changing the delayed start periodIf you want to change the time during countdown:Press Start / Pause / Cancel button. “:” sign in the middle of the delayed start time on the display stops flashing. Pause symbol appears. Delayed Start symbol flashes. Start symbol disappears. Set the desired delayed start time by pressing the Delayed Start + or - buttons. Press Start / Pause / Cancel button. Delayed Start symbol illuminates steadily. Pause symbol disappears. Start symbol appears. “:” sign in the middle of the delayed start time on the display starts flashing.
    Cancelling the Delayed Start functionIf you want to cancel the delayed start countdown and start the programme immediately:Press Start / Pause / Cancel button. “:” sign in the middle of the delayed start time on the display stops flashing. Start symbol disappears. Pause symbol and Delayed Start symbol flashes. Decrease the delayed start time by pressing the Delayed Start - button. Programme duration appears after 30 minutes. Press Start / Pause / Cancel button to start the programme.
    4.13 Starting the programmePress Start / Pause / Cancel button to start the programme. Start symbol showing the startup of the programme will turn on. Loading door is locked and Door Locked symbol appears on the display. The symbol of the step from which the programme has started appears on the display (Prewash, Main Wash, Rinse, Softener and Spin).
    4.14 Progress of programmeProgress of a running programme is indicated on the display with a set of symbols.Relevant symbol appears on the display at the beginning of each programme step and all symbols remain lit at the end of the programme. The farthermost right symbol indicates the current programme step.PrewashIf the Prewash auxiliary function is selected, Prewash symbol appears on the display indicating that the prewash step has started.
    Main WashMain Wash symbol indicating that the main wash step has started appears on the display.RinseRinse symbol indicating that the rinsing step has started appears on the display.SoftenerSoftener symbol indicating that the softener step has started appears on the display. SpinAppears at the beginning of the final spin step and remains lit during Spin and Pump special programmes.
    C
    NOTE : If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.
    Washing Machine / User’s Manual  
    						
    							46 / EN
    4.15 Loading door lockThere is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.Door Locked symbol appears when the loading door is locked. This symbol will flash until the loading door 
    becomes ready to open when programme completes or the machine is paused. Do not force to open the loading door in this step. Symbol disappears when the door is ready to open. You can open the door when the symbol disappears.
    4.16 Changing the selections after 
    programme has startedSwitching the machine to pause modePress the Start / Pause / Cancel button to switch the machine to pause mode. Pause symbol appears on the display indicating that the machine is paused. Start symbol disappears.Changing the speed and temperature settings for auxiliary functionsDepending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection". You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection".Adding or taking out laundryPress the Start / Pause / Cancel button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. Wait until the Loading Door can be opened. Open the Loading Door and add or take out the laundry. Close the Loading Door. Make changes in auxiliary functions, temperature and speed settings if necessary. Press Start / Pause / Cancel button to start the machine.
    C
    NOTE : The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.
    4.17 Child LockUse Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.
    C
    NOTE : You can switch on and off the 
    machine with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped.
    To activate the Child Lock:Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “Con” appears on the display.
    C
    NOTE : Same phrase will appear on the display if you press any button when Child Lock is enabled.
    To deactivate the Child Lock:Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “COFF” appears on the display.
    C
    NOTE : Do not forget to disable the child lock at the end of the programme if it was enabled before. Otherwise, machine will not allow to select a new programme.
    4.18 Cancelling the programme
    Press and hold Start / Pause / Cancel button for 3 seconds. Start symbol flashes. Symbol of the step at which the programme was cancelled remains lit. "End" appears on the display and the programme is cancelled.
    C
    NOTE : If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to Pump+Spin programme and discharge the water in the machine.
    4.19 Machine is in Rinse Hold modeSpin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold mode.If you want to spin your laundry when the machine is in this mode:Adjust the spin speed and press Start / Pause / Cancel button. Pause symbol disappears and Start symbol appears. Programme resumes, discharges the water and spins the laundry.If you only want to drain the water without spinning:Just press Start / Pause / Cancel button. Pause symbol disappears. Start symbol appears. Programme resumes and discharges the water only.
    Washing Machine / User’s Manual  
    						
    							47 / EN
    4.20 End of programme“End” appears on the display at the end of the programme. Symbols of the programme steps remain lit. Auxiliary function, spin speed and temperature that were selected at the beginning of the programme remain selected.
    4.21 Your machine is equipped with a 
    “Standby Mode”In case of not starting any programme or waiting without making any other operation when the machine is turned on by On/Off button and while it is in selection step or if no other operation is\
     performed approximately 2 minutes after the programme you selected has come to an end, your machine will automatically switch to energy saving mode. Brightness of indicator lights will decrease.  Also, if your product is equipped with a display showing the programme duration, this display will completely turn off. In case of rotating the Programme Selection knob or pressing any button, lights and display will restore to their previous condition. Your selections made while exiting the energy saving mode may change. Check the appropriateness of your selections before starting the programme. Readjust if necessary. This is not a fault.
    5 Maintenance and cleaningService life of the product extends and frequently faced problems decrease if cleaned at regular intervals.
    5.1 Cleaning the detergent drawerClean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time.
    1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine.
    CNOTE : If more than normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned.
    2. Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin. Wear protective gloves or use an appropriate brush to avoid touching of the residues in the drawer with 
    your skin when cleaning.3. Insert the drawer back into its place after cleaning and make sure that it is seated well.If your detergent drawer is the one indicated in the following figure:
    Washing Machine / User’s Manual  
    						
    							48 / EN
    CNOTE :  Lift the rear part of the siphon to remove it as illustrated. After performing the above mentioned cleaning procedures, replace the siphon back to its seating and push its front section downwards to make sure that the locking tab engages.
    5.2 Cleaning the loading door and the drumFor products with drum cleaning programme, please see Operating the product - Programmes.For products without drum cleaning, follow the below steps to clean the drum: Select Additional Water or Extra Rinse auxiliary functions. Use a Cottons programme without pre-wash. Set the temperature to the level recommended on the drum cleaning agent which can be provided from authorized services. Apply this procedure without any laundry in the product. Before starting the programme, put 1 pouch of special drum cleaning agent (if the special agent could not be supplied, put max. 100 g of powder anti-limescale) into the main wash detergent compartment (compartment no. “2”). If the anti-limescale is in tablet form, put only one tablet into the main wash compartment no. “2”. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.
    C
    NOTE : Repeat Drum Cleaning process in every 2 months.
    NOTE : Use an anti-limescale suitable for the washing machines.
    After every washing make sure that no foreign substance is left in the drum.
    If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
    C
    NOTE : Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents 
    for stainless steel. Never use steel wool or wire wool.
    A
    CAUTION: Never use sponge or scrub materials. These will damage the painted and plastic surfaces.
    5.3 Cleaning the body and control panelWipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth.Use only a soft and damp cloth to clean the control panel.
    5.4 Cleaning the water intake filtersThere is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do get dirty.
    1. Close the taps.2. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, take them out by means of pliers and clean them.3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.4. Replace the gaskets and filters carefully in their places and tighten the hose nuts by hand.
    Washing Machine / User’s Manual      
    						
    							49 / EN
    5.5 Draining remaining water and cleaning 
    the pump filterThe filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged 
    without any problem and the service life of the pump will extend.If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter.In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of the water, water may have to be drained completely.
    A
    CAUTION: Foreign substances left in the pump filter may damage your machine or may cause noise problem.
    In order to clean the dirty filter and discharge the water:1. Unplug the machine to cut off the supply power.
    A
    CAUTION: Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, filter must be cleaned after the water in the machine cools down.
    2. Open the filter cap. If the filter cap is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself.
    If the filter cap is one piece, pull the cap from both sides at the top to open.
    C
    NOTE : You can remove the filter cover by slightly pushing downwards with a thin plastic tipped tool, through the gap above the filter cover. Do not use metal tipped tools to remove the cover.
    3. Some of our products have emergency draining hose and some does not have. Follow the steps below to discharge the water.
    Discharging the water when the product does not have an emergency draining hose:
    a. Place a large container in front of the filter to catch water from the filter.b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water.c. When the water inside the machine is finished, take out the filter completely by turning it.4. Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.5. Install the filter.
    6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close.
    Washing Machine / User’s Manual   
    						
    							50 / EN
    6 Technical specifications
    Complying Commission Delegated Regulation (EU) No 1061/2010
    Supplier name or trademarkBeko
    Model nameWMB71242 M
    Rated capacity (kg) 7
    Energy efficiency class /  Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)A++
    Annual Energy Consumption (kWh) (1)196
    Energy consumption of the standard 60°C cotton programme at full load  (kWh)1.001
    Energy consumption of the standard 60°C cotton programme at partial load  (kWh)0.767
    Energy consumption of the standard 40°C cotton programme at partial load  (kWh)0.747
    Power consumption in ‘off-mode’ (W)0.200
    Power consumption in ‘left-on mode’ (W)1.000
    Annual Water Consumption (l) (2)9460
    Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency)B
    Maximum spin speed (rpm)1200
    Remaining moisture Content (%)53
    Standard cotton programme (3)Cotton Eco 60°C and 40°C
    Programme time of the standard 60°C cotton programme at full load (min)176
    Programme time of the standard 60°C cotton programme at partial load (min)151
    Programme time of the standard 40°C cotton programme at partial load (min)151
    Duration of the left-on mode (min)N/A
    Airborne acoustical noise emissions washing/spinning (dB)58/75
    Built-inNo
    Height (cm)84
    Width (cm)60
    Depth (cm)50
    Net weight (±4 kg.)64
    Single Water inlet  / Double Water inlet• / -• Available
    Electrical input (V/Hz)230 V / 50Hz
    Total current (A)10
    Total power (W)2200
    Main model code8810(1) Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.(2) Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water consumption will depend on how the appliance is used.(3) “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms of combined energy and water consumption. 
    Technical specifications may be changed without prior notice to improve the quality of the product.\
    Washing Machine / User’s Manual  
    						
    All Beko manuals Comments (0)

    Related Manuals for Beko Wmb 71242 M Manual