Beko Wmb 61221 W Manual

31EN
7 Troubleshooting
Programme cannot be started or selected. 
• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme")
Water in the machine.
• Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the...

32EN
Loading door cannot be opened.
• Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme.
• Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
• Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an end. >>> Wait for a couple of minutes for deactivation of the door lock.
Washing takes longer time than the one specified in the...

33EN
Machine does not switch to spinning step.
• There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalance\
d distribution of the laundry in the drum.
C Machine does not switch to spinning step when the laundry is not evenly \
distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
•  The machine will not spin if water is not drained...

34EN
Colour of the clothes faded.
• Excessive laundry was loaded in. >>> Do not load the machine in excess.
• Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
• A higher temperature is selected. >>> Select the proper programme and temperature according to the type and soiling degree of the laundry.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see "Cleaning the loading...

35EN
Detergent residue in the detergent drawer.
• Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent.
• Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
• Water pressure is low. >>> Check the water pressure.
• The detergent in the main wash compartment got wet while taking in the pr ewash water. Holes of the detergent compartment are blocked. >>> Check the holes and clean if...

36EN
Laundry remains wet at the end of the programme
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.
C Machine does not switch to spinning step when the laundry is not evenly \
distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
A If you cannot eliminate the problem although you follow the...

37EN
8 Guarantee
Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the 
original purchase. 
What is covered?
• Repairs necessary as a result of faulty materials, defective components or manufacturing defect.   
• The cost of functional replacement parts, but excluding consumable items. 
• The labour costs of a Beko approved repairer to carry out the repair. 
What is not covered?
• Transit, delivery or accidental damage or misuse and abuse.
•...

38EN
Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee.
You should also complete the details below; it will help us assist you when requesting service.  (The model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label affixed to the appliance)
Model No: 
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply telephone the appropriate...

39EN