BEKO WMB 50831 User Manual

							31RO
A rămas detergent pe rufe. 
• Au fost intruduse prea multe rufe. >>> Nu supraîncărcaţi maşina.• Selectare incorectă a programului şi temperaturii. >>> Selectaţi programul şi temperatura adecvată pentru rufele de spălat.• A fost folosit un detergent incorect. >>> Selectaţi un detergent adecvat pentru rufele de spălat.• Tamburul nu a fost curăţat regulat. >>> Curăţaţi regulat tamburul. Consultaţi "Curăţarea uşii şi tamburului".
Se formează spumă în exces în maşină.
• Se folosesc detergenţi necorespunzători pentru maşina de spălat. >>> Folosiţi detergent corespunzător pentru maşina de spălat.• A fost folosit prea mult detergent.  >>> Folosiţi cantitatea recomandată de detergent.• Detergentul a fost păstrat în condiţii improprii. >>> Păstraţi detergentul într-un recipient închis şi uscat. Nu păstraţi detergentul în loc\
uri excesiv de călduroase.• Se generează spumă excesivă din cauza texturii materialelor cum ar fi tulul. >>> Folosiţi cantităţi reduse de detergent pentru acest tip de mate\
riale.• Detergentul a fost introdus în compartimentul incorect. >>> Introduceţi detergentul în compartimentul corect.• Se alimentează prea rapid cu balsam. >>> Posibilă problemă cu valvele sau dozatorul de detergent. Contactaţi un agent de service autorizat.• Tamburul nu a fost curăţat regulat. >>> Curăţaţi regulat tamburul. Consultaţi "Curăţarea uşii şi tamburului".
Se revarsă spună din sertarul pentru detergent.
• A fost folosit prea mult detergent.  >>> Amestecaţi o lingură de balsam cu ½ litru de apă şi turnaţi-l în compartimentul principal al sertarului p\
entru detergent.
C Folosiţi detergent adecvat pentru programele şi cantităţile maxime indicate în “Tabelul de programe şi consumuri”. Când folosiţi substanţe chimice suplimentare (de eliminat pete, clor etc.), reduceţi cantitatea de detergent.
Rufele rămân ude la sfârşitul programului.
• Este posibil să se fi produs spumă în exces şi să se fi activat sistemul automat de absorbţie a spumei, datorită folosirii de detergent în exces. >>> Folosiţi cantitatea recomandată de detergent.
C Dacă rufele nu sunt distribuite egal în tambur, maşina nu va stoarce pentru a preveni deteriorarea maşinii şi a altor bunuri. Rufele trebuie aranjate şi centrifugate din nou.
A Dacă nu reuşiţi remedierea problemelor după urmarea instrucţiunilor din această secţiune, consultaţi vânzătorul sau agentul de service autorizat. Nu încercaţi niciodată să reparaţi produsul pe cont propriu.
  
						

							33EN
Please read this user manual first!Dear Customer,We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure.Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well.
The user manual will help you use your machine in a fast and safe way.• Read the user manual before installing and starting your product.• Always follow the safety instructions.• Keep this user manual within easy reach for future reference. • Read also the other documents supplied with the product.Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual. 
Explanation of symbolsThroughout this user manual the following symbols are used:
C Important information or useful hints about usage.
A Warning for hazardous situations with regard to life and property.
B Warning for electric shock.
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home.  We thank you doing your part to protect the environment.
2820522025_EN/040811.1336
  
						

							34EN
TABLE OF CONTENTS
1 Your washing machine  35
Overview. . . . . . . . . . . . . . . . . . . . . . .35
Technical specifications. . . . . . . . . . . .36
2 Warnings  37
General Safety. . . . . . . . . . . . . . . . . . .37
First Use  . . . . . . . . . . . . . . . . . . . . . . .37
Intended use. . . . . . . . . . . . . . . . . . . .37
Safety instructions. . . . . . . . . . . . . . . .38
If there are children in your house.... . .38
3  Installation  39
Appropriate installation location. . . . . .39
Removing packaging reinforcement. . .39
Removing the transportation locks. . . .39
Connecting water supply. . . . . . . . . . .40
Connecting to the drain. . . . . . . . . . . .40
Adjusting the feet. . . . . . . . . . . . . . . . .41
Electrical connection  . . . . . . . . . . . . . .41
First use   . . . . . . . . . . . . . . . . . . . . . . .42
Disposing of packaging material  . . . . .42
Transportation of the product. . . . . . . .42
Disposing of the old product  . . . . . . . .42
4  Preparation  43
Things to be done for energy saving  . .43
Sorting the laundry   . . . . . . . . . . . . . . .43
Preparing laundry for washing  . . . . . . .43
Correct load capacity   . . . . . . . . . . . . .44
Loading the laundry. . . . . . . . . . . . . . .44
Using detergent and softener   . . . . . . .44
Tips for efficient washing. . . . . . . . . . .47
5  Operating the product  48
Control panel. . . . . . . . . . . . . . . . . . . .48
Preparing the machine. . . . . . . . . . . . .49
Programme selection. . . . . . . . . . . . . .49
Main programmes   . . . . . . . . . . . . . . .49
Additional programmes . . . . . . . . . . . .49
Special programmes  . . . . . . . . . . . . . .50
Temperature selection  . . . . . . . . . . . . .50
Spin speed selection. . . . . . . . . . . . . .50
Programme and consumption table. . .51
Auxiliary function selection. . . . . . . . . .52
Starting the programme. . . . . . . . . . . .53
Child Lock. . . . . . . . . . . . . . . . . . . . . .53
Progress of programme. . . . . . . . . . . .53
Loading door lock  . . . . . . . . . . . . . . . .54
Changing the selections after programme has started   . . . . . . . . . . . . . . . . . . . . .54
Canceling the programme. . . . . . . . . .54
End of programme   . . . . . . . . . . . . . . .54
6  Maintenance and cleaning  55
Cleaning the detergent drawer. . . . . . .55
Cleaning the loading door and the drum 55
Cleaning the body and control panel  . .55
Cleaning the water intake filters. . . . . .55
Draining remaining water and cleaning the pump filter. . . . . . . . . . . . . . . . . . . . . .56
7  Troubleshooting  58
  
						

							35EN
1 Your washing machine
Overview
73
4
6
5
2
18
1- Power cable2- Top panel3- Control panel4- Filter cap
5- Adjustable feet6- Loading door7- Detergent drawer8- Drain hose
  
						

							36EN
BEKO
WMB 50831 PT
5
A +
158
0,743/0,606
0.606
0,25/1,35
7260
D
800
159/129
129
-
57/72
-
84 X 60 X 45
Brand
Model
Capacity(Kg)
Energy efficiency class
Energy consumption kWh/per year*
Energy consumption 60°C cotton full and partial loading
Energy consumption 40°C partial loading
Power consumption in ‘off-mode’ /  ‘left-on mode’ (W)
Annual water consumption liters/per year**
Spin performance class***
Maximum spin speed rpm
Program duration 60°C cotton full and partial loading  min.
Program duration 40°C cotton partial loading  min.
Duration of the left-on mode (T l ) 
Noise level for washing /spinning dB(A) re1 pW 
Built-in
Product net dimension(HxlxD)
Technical specifications
C Technical specifications may be changed without prior notice to improve the quality of the product.
C Figures in this manual are schematic and may not match the product exactly. 
C Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.
  
						

							37EN
2 Warnings
Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void.
General Safety•  Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.•  If the power cable or mains plug is damaged you must call Authorized Service for repair.•  Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry.•  Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.•   Your washing machine is designed to continue operating in the event of a power interruption. You cannot cancel any program by pressing the “On/Off button.” Your machine will not resume its program when the power restores. Press the “Start/Pause/Cancel” button for 3 seconds to cancel the program (See, Cancelling a Program)•   There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.•  Some problems you may encounter may be caused by the software. Press “Start/Pause/Cancel” button for 3 seconds to cancel the program set in your machine before calling the authorized service.
First Use•   To prepare your machine for washing, carry out your first washing process 
without loading your machine and with detergent under “Cottons 90°C” program.•  Ensure that the cold and hot water connections has been made correctly when installing your machine. Otherwise, your laundry may come out hot at the end of the washing process and may wear out.•  If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit breaker.•  While using with or without a transformer, do not neglect to have the grounding installation laid by a qualified electrician. Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding.•  To make your machine ready for use, please be sure that the tap water supply and water drainage systems are appropriate before calling the authorized service. If they are not, call a qualified plumber to have any necessary arrangements carried out.
Intended use•  This product has been designed for home use.•   The appliance may only be used for washing and rinsing of textiles that are marked accordingly.•   Only detergents, softeners and supplements suitable for washing machines may be used.•   Observe the care instructions labelled on textile products and any other instructions given by companies that produce detergents for your machine.•   This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  
						

							38EN
Safety instructions•  This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity.•  The supply and draining hoses must always be securely fastened and remain in an undamaged state.•  Fit the draining hose to a washbasin or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures!•  Never open the door or remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water.•  Never force open the locked door! The door will be ready to open just a few minutes after the washing cycle comes to an end.•  Unplug the machine when it is not in use.•  Never wash down the appliance with a water hose! There is the risk of electric shock! Always disconnect from the mains by unplugging before cleaning.•  Never touch the plug with wet hands. Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the machine if the power cord or plug is damaged.•  Never attempt to repair the machine yourself. Otherwise, you may be putting yours and other’s lives in danger.•   For malfunctions that cannot be solved by information in the operating manual:  Turn off the machine, unplug it, turn off the water tap and contact an authorized service agent.
If there are children 
in your house...•  Electrical appliances may be dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine.•  Close the door when you leave the area where the machine is located.•  Store all detergents in a safe place out of reach of the children.
  
						

							39EN
3 Installation
Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
C Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility. 
B Installation and electrical connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
A Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
C  Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
Appropriate installation location•   Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.•  Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!•  Do not place the product on the power cable.•  Do not install the product at places where temperature may fall below 0ºC.•  Place the product at least 1 cm away from the edges of other furniture.
Removing packaging 
reinforcementTilt the machine backwards to remove the packaging reinforcement. Remove the 
packaging reinforcement by pulling the ribbon.
Removing the 
transportation locks
A Do not remove the transportation locks before taking out the packaging reinforcement.
A Remove the transportation safety bolts before operating the washing machine, otherwise, the product will be damaged.1.   Loosen all the bolts with a spanner until they rotate freely (C).
2.  Remove transportation safety bolts by turning them gently.
3.  Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)
  
						

							40EN
C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
C Never move the product without the transportation safety bolts properly fixed in place!
Connecting water supply
C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 10 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.
C If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)
C If you want to use both water inlets of the product, connect the hot water hose after removing the stopper and gasket group from the hot water valve. (Applies for the products supplied with a blind stopper group.)
A Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.
A Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.1.   Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.
A Ensure that the cold and hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.2.   Tighten all hose nuts by hand. Never use a wrench when tightening the nuts.
3.  Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
Connecting to the drain•  The end of the drain hose must be directly connected to the wastewater drain or to the washbasin. 
A Your house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out. •   The hose should be attached to a height of at least 40 cm, and 100 cm at most.•  In case the hose is elevated after laying it on the floor level or close to