Beko Wma 5100 W Instruction Manual
Have a look at the manual Beko Wma 5100 W Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 187 Beko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
EN31 There is too much foam. You may not be using proper detergent for automatic washing machines. Use only automatic washing machine detergents in your washing machine. Excessive amount of detergent may have been used.Use only sufficient amount of detergent. Too much detergent may have been used for a small amount of lightly soiled laundry. Use only sufficient amount of detergent. Detergent may have been stored improperly.Store detergent in a closed and dry location. Do not store in excessively hot places. Type of material being washed (lace items will cause excessive foam due to their meshed structure). Use smaller amounts of detergent for lace items. Detergent might have been put in the wrong compartment. If you put detergent in the prewash compartment although you have not selected a prewash cycle, the machine can take this detergent during rinsing or softener step. Softener being released early. You may have added too much softener. The detergent dispenser might be problematic. Water may be siphoned (pulling the softener into the washer early) during the fill or rinse cycles. There might be problems with the valves. Machine does work. No light is on. The plug might not be plugged in the mains outlet.Plug should be checked. Fuse may have blown.Fuse should be checked. Electricity may be cut off.Power should be checked. The “On/Off” button might have not been pressed.This button must be pressed. The machine did not start after the program was selected and the ‘Start/Pause/Cancel’ button was pressed. The front door may be ajar. “Washing” and “Start/Pause/Cancel” lights are flashing after the program is started. Water may have been cut off. You can restart your machine by pressing the “Start/Pause/Cancel” button for a short time after ensuring that the water is not cut off. The “Lid” light is flashing. It shows the safety period until the door lock is opened. For your safety, the front door can only be opened 2 minutes after the program is completed. The “Lid” light will flash during this period.