Beko Wma 5100 W Instruction Manual

							WM 5100 W
WM 5100 S
Automatic
washing machine 
						

							Please read this manual first!
Dear Customer,
We hope that your product which has been manufactured in modern facilities and 
passed through a strict quality control procedure will give you the best results.
Therefore, we advise you to read through this manual carefully before using your 
product and keep it for future reference.
This operation manual will… 
…help you use your machine in a fast and safe way.
	 •	Please	read	the	Operation	Manual	before	installing	and	starting	your	machine.
	 •	Particularly	follow	the	instructions	related	to	safety.
	 •	Keep	this	Operating	Manual	within	easy	reach.	You	may	need	it	in	the	future.	
	 •	Please	read	all	additional	documents	supplied	with	this	machine.
Please	note	that	this	Operating	Manual	may	be	applicable	for	several	other	models.	
Differences between models will be identified in the manual.
Explanation of symbols
Throughout	this	Operation	Manual	the	following	symbols	are	used:
C Important information or useful hints about usage.
A Warning for hazardous situations with regard to life and property.
B Warning for supply voltage.
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose.	Your	appliance	also	contains	a	great	amount	of	recyclable	material.	It is marked with this label to indicate the used appliances that should\
 not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home.  We thank you doing your part to protect the environment. 
						

							TABLE OF CONTENTS
1  Your Washing Machine 4
Overview	4
Specifications 5
2  Warnings 6
General Safety 6
First Use 6
Intended use 6
Safety instructions 7
If there are children in your house... 7
3  Installation 8
Removing packaging reinforcement 8
Opening	the	transportation	locks	8
Appropriate installation location 8
Adjusting the feet 8
Connecting to the water supply. 9
Connecting to the drain 9
Electrical connection  10
Destroying the packaging material 10
Disposing of the old machine 10
4  Initial preparations for  
washing 11
Sorting the laundry  11
Preparing	clothes	for	washing	 11
Correct load capacity 11
Loading door 12
Detergents and softeners 12
5  Selecting a Program and 
Operating Your Machine 14
Control panel  14
Turning the machine on 15
Program	selection	15
Spin Speed selection 16
Program	selection	and	consumption	
table 17
Auxiliary functions 18
Starting	the	Program	18
Progressing	a	program	18
Changing the program after the
program has started 19
Child-proof lock 20
Ending the program through
canceling 20
End	of	Program	20
6  Quick instructions for         
daily use 21
7  Cleaning and care 23
Detergent drawer  23
The loading door and the drum 23
Body and control panel 23
Inlet water filters 23
Draining any remaining water and 
cleaning the pump filter 24
8  Troubleshooting 26 
						

							EN4
Top Lid
Detergent Drawer
Control	Panel
Height-adjustable Feet
Door
Filter Cap
1
2
3
4
5
6
Overview
1  Your Washing Machine
Figure 1
1
2
3
4
5
6 
						

							EN5
Specifications
Specifications of this appliance may change without notice to improve the quality of 
the product. Figures in this manual are schematic and may not match your product 
exactly. 
Values stated on the machine labels or in the documentation accompanying \
it are 
obtained in laboratory in accordance with the relevant standards.  Depending on 
operational and environmental conditions of the appliance, values may vary.
Models
Maximum	dry	laundry	capacity	(kg)
Height	(cm)
Width	(cm)
Depth	(cm)
Net	Weight	(kg)
Electricity	(V/Hz.)
Total	Current	(A)
Total	Power	(W)
Spinning	cycle	(rpm	max.)
WM5100WWM5100S
55
8484
6060
4545
6060
230 V / 50hz230 V / 50hz
1010
22002200
10001000 
						

							EN6
Please	read	the	following	information.	
Otherwise,	there	may	be	the	risk	of	
personal injury or material damage. 
Moreover,	any	warranty	and	reliability	
commitment will become void.
General Safety
•	 Never	place	your	machine	on	a	
carpet	covered	floor.	Otherwise,	
lack of airflow from below of your 
machine may cause electrical 
parts to overheat. This may cause 
problems with your washing 
machine.
•	 If	the	power	cable	or	mains	plug	is	
damaged you must call Authorized 
Service for repair.
•	 Check	water	hoses	for	wear.	Do	
not use old/used water inlet hoses. 
These may cause stains on your 
laundry.
•	 Fit	the	drain	hose	into	the	discharge	
housing securely to prevent any 
water leakage and to allow machine 
to take in and discharge water as 
required. It is very important that the 
water intake and drain hoses are not 
folded, squeezed, or broken when 
the appliance is pushed into place 
after it is installed or cleaned.
•		 Your	washing	machine	is	designed	
to continue operating in the event 
of	a	power	interruption.	You	cannot	
cancel any program by pressing the 
“On/Off	button.”	Your	machine	will	
not resume its program when the 
power	restores.	Press	the	“Start/
Pause/Cancel”	button	for	3	seconds	
to	cancel	the	program	(See,	
Cancelling	a	Program)
•		 There	may	be	some	water	in	your	
machine when you receive it. This is 
from the quality control process and 
is normal. It is not harmful to your 
machine.
•	 Some	problems	you	may	encounter	
may be caused by the software. 
Press	"Start/Pause/Cancel"	button	
for 3 seconds to cancel the program 
set in your machine before calling 
the authorized service.
First Use
•		 To	prepare	your	machine	for	
washing, carry out your first washing 
process without loading your 
machine and with detergent under 
“Cottons	90°C”	program.
•	 Ensure	that	the	cold	and	hot	water	
connections has been made 
correctly when installing your 
machine.	Otherwise,	your	laundry	
may come out hot at the end of the 
washing process and may wear out.
•	 If	the	current	fuse	or	circuit	breaker	
is less than 16 Amperes, please 
have a qualified electrician install a 
16 Ampere fuse or circuit breaker.
•	 While	using	with	or	without	a	
transformer, do not neglect to have 
the grounding installation laid by a 
qualified	electrician.	Our	company	
shall not be liable for any damages 
that may arise when the machine is 
used on a line without grounding.
•	 To	make	your	machine	ready	for	
use, please be sure that the tap 
water supply and water drainage 
systems are appropriate before 
calling the authorized service. If they 
are not, call a qualified plumber to 
have any necessary arrangements 
carried out.
Intended use
•	 This	product	has	been	designed	for	
home use.
•		 The	appliance	may	only	be	used	for	
washing and rinsing of textiles that 
are marked accordingly.
•		 Only	detergents,	softeners	and	
supplements suitable for washing 
machines may be used.
•		 Observe	the	care	instructions	
labelled on textile products and 
any other instructions given by 
2  Warnings 
						

							EN7
companies that produce detergents 
for your machine.
Safety instructions
•		 This	appliance	must	be	connected	
to an earthed outlet protected by a 
fuse of suitable capacity.
•		 The	supply	and	draining	hoses	must	
always be securely fastened and 
remain in an undamaged state.
•	 Fit	the	draining	hose	to	a	washbasin	
or bathtub securely before starting 
up your machine. There may be a 
risk of being scalded due to high 
washing temperatures!
•	 Never	open	the	door	or	remove	the	
filter while there is still water in the 
drum.	Otherwise,	there	may	be	the	
risk of flooding and possible injury 
due to the hot water.
•	 Never	force	open	the	locked	door!	
The door will be ready to open just a 
few minutes after the washing cycle 
comes to an end.
•		 Unplug	the	machine	when	it	is	not	in	
use.
•	 Never	wash	down	the	appliance	
with a water hose! There is the risk 
of electric shock! Always disconnect 
from the mains by unplugging before 
cleaning.
•		 Never	touch	the	plug	with	wet	
hands. Never unplug by pulling 
on the cable, always pull out from 
the plug only. Do not operate the 
machine if the power cord or plug is 
damaged.
•	 Never	attempt	to	repair	the	machine	
yourself.	Otherwise,	you	may	be	
putting yours and other's lives in 
danger.
•		 For	malfunctions	that	cannot	
be solved by information in the 
operating	manual:
 Turn off the machine, unplug it, turn 
off the water tap and contact an 
authorized service agent.
If there are children in your 
house...
•		 Electrical	appliances	may	be	
dangerous	for	the	children.	Keep	
children away from the machine 
when it is operating. Do not let them 
tamper with the machine.
•		 Close	the	door	when	you	leave	the	
area where the machine is located.
•		 Store	all	detergents	in	a	safe	place	
out of reach of the children. 
						

							EN8
Removing packaging 
reinforcement
Tilt the machine to remove the 
packaging reinforcement. Remove the 
packaging reinforcement by pulling the 
ribbon.
Opening the transportation 
locks
C Transportation safety bolts must 
be removed before operating the 
washing	machine!	Otherwise,	the	
machine will be damaged!
1.   Loosen all the bolts with a spanner 
until	they	rotate	freely	(“C”)
2.  Remove transportation safety bolts 
by turning them gently.
3.	 Fit	the	covers	(supplied	in	the	bag	
with	the	Operation	Manual)	into	the	
holes	on	the	rear	panel.	(“P”)
C	 Keep	the	transportation	safety	
bolts in a safe place to reuse when 
the washing machine needs to be 
moved again in the future.
C Never move the appliance without 
the transportation safety bolts 
properly fixed in place!
Appropriate installation 
location
Install the appliance in environments 
which have no risk of freezing, in a 
stable and level position.
C The floor must be capable of 
carrying the load on it!
C If the washing machine and a drier 
are placed on top of each other, 
their approximate weight together 
may reach 180 kg when they are 
full.
Important:
•		 Do	not	place	the	appliance	on	top	of	
the power cable.
•		 Keep	at	least	1cm	distance	from	the	
edges of other furniture.
•		 Place	the	machine	on	a	firm	surface;	
do not position it on a long pile rug 
or such like surfaces.
Adjusting the feet
C Do not use any tools to loosen the 
lock	nuts.	Otherwise,	they	can	be	
damaged.
1.		 Manually	(by	hand)	loosen	the	lock	
nuts on the feet.
2.   Adjust them until the machine 
stands level and firm.
3  Installation 
						

							EN9
3.		 Important:	Tighten	all	lock	nuts	up	
again.
Connecting to the water 
supply.
Important:
•		 The	water	supply	pressure	required	
to run the machine must be 1-10 
bar	(0,1	–	1,0	MPa).	Attach	a	
pressure-reducing valve if the water 
pressure is higher.
•		 Connect	the	special	hoses	supplied	
with the machine to the water intake 
valves on the machine. The hose 
bearing	the	“red”	sign	(90°C	max)	
is the hot water inlet and the hose 
bearing	the	“blue”	 sign	(25°C	 max)	is	
for the cold water inlet.
•	 If	you	are	going	to	use	your	double	
water-inlet machine as a single 
(cold)	water-inlet	unit,	you	must	
install the stopper*, supplied with 
your machine to the hot water valve.
  If you want to use both water inlets 
of the product, you can connect the 
hot water hose after removing the 
stopper and gasket group from the 
hot water valve.
  * Applies for the products supplied 
with a blind stopper group.
•	 Open	the	taps	completely	after	
making the hose connection to 
check if there is any water leakage 
at the connection points. Turn off 
the tap and remove the nut in case 
of any leakage. Retighten the nut 
carefully after checking the seal. 
To prevent any water leakage and 
any other damage to be caused by 
it, keep the taps closed when the 
machine is not in use.
•	 Models	with	a	single	water	inlet	
should not be connected to the 
hot water tap. Laundry may be 
damaged or the appliance may 
switch to protection mode and not 
work.
•	 If	you	are	going	to	use	your	double	
water-inlet machine as a single 
(cold)	water-inlet	unit,	you	must	
install the stopper*, supplied with 
your machine to the hot water valve.
 If you want to use both water inlets 
of the product, you can connect the 
hot water hose after removing the 
stopper and gasket group from the 
hot water valve.
* Applies for the products supplied with 
a blind stopper group. 
When returning the appliance to its 
place after maintenance or cleaning, 
care should be taken not to fold, 
squeeze or block the hoses.
Connecting to the drain
The water discharge hose can be 
attached to the edge of a washbasin or 
bathtub. The drain hose should be firmly 
fitted into the drain as to not loosen in 
its housing.
Important: 
						

							EN10
•	 The	end	of	the	drain	hose	can	
be directly connected to the 
wastewater drain or to the 
washbasin. The fitting must be 
secured in all types of connections. 
Your	house	may	be	flooded	if	the	
hose falls out of its housing during 
water discharging.
•	 The	hose	should	be	attached	to	a	
height of at least 40 cm, and 100 
cm at most.
•	 In	case	the	hose	is	elevated	
after laying it on the floor level or 
close	to	the	ground	(less	than	
40	cm	above	the	ground),	water	
discharge becomes more difficult 
and the laundry may come out wet. 
Therefore, the heights described in 
the figure should be followed.
•	 To	prevent	dirty	water	refilling	the	
machine, and to allow for easy 
discharge, the end of the hose 
must not be submerged in the drain 
water. The end of the hose must be 
able to take in air. The hose should 
be pushed into the drainage for 
more than 15 cm. If it is too long 
you may have it shortened.
•	 The	end	of	the	hose	should	not	be	
bent, it should not be stepped on 
and it must not be folded between 
the drain and the machine.
•	 The	length	of	the	hose	is	too	short,	
you may add an extension hose 
to the original section. The length 
of the hose must not be longer 
than 3.2 m after coming out of the 
machine. To avoid water leakage 
failures, the connection between the 
extension hose and the drain hose 
of the product must be fitted well 
with an appropriate clamp as not to 
come off and leak. 
Electrical connection 
Connect the machine to an earthed 
outlet protected by a fuse of suitable 
capacity.
Important:
•	 Connection	should	comply	with	
national regulations.
•	 Power	cord	plug	must	be	within	
easy reach after installation.
•	 The	voltage	and	the	allowed	fuse	
protection are specified in the 
section	“Technical	Specifications”.
•	 The	specified	voltage	must	be	equal	
to your mains voltage.
•	 Connection	via	extension	cords	or	
multi-plugs should not be made.
B A damaged power cable must be 
replaced by a qualified electrician.
B The appliance must not be operated 
unless it is repaired! There is the risk 
of electric shock!
Destroying the packaging 
material
Packaging	material	can	be	dangerous	to	
children.	Keep	the	packaging	materials	
out of reach of children or dispose 
them by classifying according to 
waste directives. Do not dispose them 
together with normal domestic waste.
Packaging	materials	of	your	machine	are	
manufactured from recyclable materials.
Disposing of the old machine
Dispose of your old appliance in an 
environmental friendly manner.
•	 You	may	refer	to	your	local	agent	or	
solid waste collection center in your 
municipality to learn how to dispose 
of your machine.  
Before disposing of your old washing 
machine, cut off the mains plug and 
make the door lock unusable.