Beko Wkd 24500 Ts Users Manual

15
Pressing “On/Off”
By pressing “On/Off” button you can make your ma-
chine ready for selecting program. When “On/Off” key is 
pressed “door” led will light on meaning “door can open”. 
Press “On/Off” key again for turning your machine off. 
Pressing “On/Off” does not mean program started opera
-
tion. You must press “Start/Pause/Cancel” for starting the 
program. 
Child-proof lock
During washing laundry in order to maintain that program 
progress is not affected by pressing keys by children 
there is...

16
When program is completed “Ready” led will be on again. 
During machine operation you can press “Start/Pause/
Cancel” key for getting machine to “Pause” position. In 
this case “Start/Pause/Cancel” led will blink. 
Changing Program 
You can use this feature for washing laundry in the same 
textile group for washing at lower or higher temperatures. 
For example, instead of Cotton60, Cotton40 can be used. 
For selecting Cotton40 instead of Cotton60 by pressing 
“Start/Pause/Cancel” key machine is...

17
Canceling a Program 
For canceling a program “Start/Pause/Cancel”  key is 
pressed for three seconds. After this period “Start/Pause/
Cancel”  and all other leds will be off .You can select a 
new program and start washing.
If cancel task is performed during washing “Spin” led on 
display will light on, machine will pump and when “Spin” 
led is off “door” led will be on, door can be opened and 
new program can be selected. 
Even program selection button is changed during the 
program initially...

18
Detergent Dispenser
Powder detergent residue may accumulate in drawer 
after a while. In order to clean detergent drawer press the 
marked point of the siphon on softener compartment and 
push the drawer towards yourself. Wash the drawer with 
water 
Siphon
Do not neglect cleaning suction cup when it becomes 
soiled. In order take suction cup out first take detergent
drawer out. Clean it in order to eliminate blocking by soft-
ener residue. After cleaning place suction cup to its place 
and make sure...

19
Cleaning Pump Filter 
There is filter system maintaning long lifetime of pump by
blocking foreign objects like button, cloth fiber enter to the
pump during drain of washing water. It is useful to clean 
the filter when it is soiled.
In order to do this:
Unplug your machine. Open the filter at bottom right cor
-
ner by pressing marked space on the lid.
Hot water risk: There might be 15 lt., 90°C hot water in 
the drum. Open the filter carefully.Before opening the filter drain the water with drain hose.
Pull...

20
      Installation
If your system is not ready, let a certified plumber make it 
ready.  
1.  Removing the transportation safety bolts
Before the washing machine is operated, the transit bars 
must be removed! In order to do this:
1. Loosen “C” bolts by rotating them counter clockwise 
with a suitable spanner 
2. Remove transportation safety bolts by turning. 
3. Place “P” plastic covers onto the openings of transpor-
tation locks by rotating in direction of arrow and pushing. 
Attention please! Keep...

21
nection. Seals on machine side must be connected 
filter cannal.
After connecting the hose, check all connections for leaks In order to eliminate any risk due to water leak-
age keep the taps off when machine is not used.
 
Your machine will operate efficiently if the water from
tap is minimum 1 and maximum 10 bars. Practically 1 bar means 8 liters of water in one minute when tap is fully on. 
Connect hose to the machine. Tighten bolts with hand 
power, do not use spanner.
Double inlet models can be...

22
4. Electrical connection
Connect the power cord to the appropirate electrical 
system which is being supported by the maximum voltage 
and current rating indicated on the rating plate placed 
inside the kick plate.
Look! Page 1, Steps before operating Fullautomatic 
Washing Machine and safety precautions.
Make sure that you have grounded power outlet. 
Attention! Before any operation of the machine check the 
following.
• Did you close the front door?
• Is the tap open?
• Is water drain hose placed...

23
      Before calling service
You turned the machine on, but the leds are off on 
the panel.
Check the grounding on the power cable or a blown fuse. 
Check the front door proper closure.
Machine does not take water.
Check the front door for proper closure. Either taps are 
closed or water intake filters are clogged.
Taken water is directly discharged.
Check if the discharge hose placed as described in the 
users manual or not.  Water coming from beneath the machine.
Check the water intake and drain...

24