Beko Dfn 6833 B Manual

							18
2555
4-3B Tall Tub cutlery basket
1029_redaksiyon
\037\036
Silverware basket
(depends on the model)
Silverware basket is designed to wash 
your dishes such as fork, spoon and 
etc. in a cleaner manner. 
Silverware basket piece
(depends on the model)
You can place your forks, spoons and 
etc. to upper basket with the additional 
piece in the figure.
Movable silverware basket
(depends on the model)
Since the cutlery basket can be moved 
(A, B), you can create a wider space 
while placing your dishes to the lower 
basket and free up space for your 
dishes in different sizes. 
EN  
						

							19
1054
4000_euro2_altsepet_
birlesik_altyatar_
mandal
4000_euro2_altsepet_
birlesik_altyatar_
mandal_DETAY
Collapsable lower basket 
wires (2 pieces)
(depends on the model)
The two piece foldable wires located 
at the lower basket of the machine are 
designed for an easier placement of 
large pieces such as pans, bowls, etc. 
(1, 2). 
You can create larger spaces by 
folding each wire individually or all of 
them at once. Lay the foldable wires 
down by pressing on the latch (A).
Collapsable lower basket 
wires (4 pieces)
(depends on the model)
The four piece foldable wires located 
at the lower basket of the machine 
are designed for an easier placement 
of large pieces such as pans, bowls, 
etc. (1, 2, 3, 4). You can create larger 
spaces by folding each wire individually 
or all of them at once. Lay the foldable 
wires down by pressing on the latch 
(A).
\037
\036
\035
\034
\037 
EN          
						

							20
Collapsable lower basket 
wires (6 pieces)
(depends on the model)
The foldable wires (A) located at 
the lower basket of the machine are 
designed for an easier placement of 
large pieces such as pans, bowls, 
etc. You can create larger spaces by 
folding each wire individually or all 
them at once.
To bring the collapsible wires into 
horizontal position, grab the wire from 
mid position and push them in the 
directions of arrows (B) To bring the 
wires back to vertical position,  just lift 
them up. Collapsible wires will click into 
the latch again.
 Bringing the wires to the horizontal 
position byholding them from the 
tips may cause them to bend. 
Therefore, it will be appropriate 
to bring the wires in the middle to 
horizontal or vertical position by 
holding them from their stems and 
pishing in the direction of arrow.
5000_eu2_altsepet_elle_
yatartel_ayrı
3 4
6
5 
EN                   
						

							21
Collapsable lower basket 
wires (4 & 8 pieces)
(depends on the model)
The foldable wires (A) located at 
the lower basket of the machine are 
designed for an easier placement of 
large pieces such as pans, bowls, 
etc. You can create larger spaces by 
folding each wire individually or all 
them at once.
To bring the collapsible wires into 
horizontal position, grab the wire from 
mid position and push them in the 
directions of arrows (B) To bring the 
wires back to vertical position,  just lift 
them up. Collapsible wires will click into 
the latch again (C).
 Bringing the wires to the horizontal 
position byholding them from the 
tips may cause them to bend. 
Therefore, it will be appropriate 
to bring the wires in the middle to 
horizontal or vertical position by 
holding them from their stems and 
pishing in the direction of arrow.
9000_eu2_
altsepet_grundig_
mkz_4&8yatar
3
3 4
4
5
5
7
7
8
8 6
6
B
BC
C
1
1
2
2 3
3
4
4 
EN                                                                                                                                                                                                                                                                                                                              
						

							22
1019
\037\036
\035
\034 \034
\034
\033 \032\031
Lower basket multipurpose / 
height adjustable service rack
(depends on the model)
This accessory located at the lower 
basket of the machine allows you 
to easily wash pieces such as extra 
glasses, long ladles and bread knives.
To close the racks:
1. 
Fold the rack (A).
2. Slide the rack up (B).
3. Put the rack in vertical position (C).
4. Slide the rack down and lock it with 
the tabs (D).
 Perform the same process in 
reverse order to open the racks.
To adjust the height of the racks:
1. Fold the rack (E).
2. Slide the rack up (F).
3. Open the rack at the desired level 
(G).
 Make sure that the impeller does 
not touch the dishes you placed on 
the racks. 
EN  
						

							23
1026
1023
1020
Lower basket bottle wire
(depends on the model)
The bottle wire is designed for easier 
washing of long pieces with wide 
mouths. You may take out the bottle 
wire from the basket when not in use 
by pulling it out from both sides (H).
Upper basket height 
adjustable rack
(depends on the model)
Use the lower and upper parts of the 
height adjustable racks in the upper 
basket of the machine by sliding them 
down or up according to the heights of 
the glasses, cups or etc. (A, B, C).
\037
\036\035
Upper basket drawer
(depends on the model)
You can easily place additional desert 
spoons, small forks and knives into the 
basket drawer installed to the upper 
basket of your machine.
\037 
EN  
						

							24
1025
4-9A Ust sepet Katlanan 
teller
Collapsable upper basket 
wires
(depends on the model)
To bring the collapsable wires on the 
upper basket of the machine into 
horizontal position, press on the latch 
(1). Place your larger dishes into the 
area created (2). To bring the wires 
back to vertical position, just lift them 
up.
\037\036
Upper basket glass support 
piece
(depends on the model)
When placing long stemmed glasses or 
wine glasses, do not lean them against 
other pieces but to the edge of the 
basket or to the rack (1). Do not lean 
long glasses against each other. They 
can move and get damaged during 
washing. 
If you wish to place large-volume 
pieces on the upper basket, release 
the tab of the glass support piece from 
the upper basket wire it is hooked to. 
Thus, you can obtain a wider space. 
EN  
						

							25
6000_eu2_
üstsepet_full_yatar_
sepet
Collapsable upper basket 
wires
(depends on the model)
There are collapsible wires on the 
upper basket of the machine that you 
can lay down when you need a larger 
room for big dishes. 
On your upper basket there are two 
types of collapsible wires namely, 
fully laid system (A) and gradually laid 
system (B). To bring the collapsible 
wires into horizontal position, push 
the wires in the direction of the arrow 
by holding them from the middle. You 
can place your larger dishes into the 
area created. To bring the wires back 
to vertical position, just lift them up. 
Collapsible wires will click into the latch 
again. 
 
 Holding the wires from ends to 
put them in lying position may 
cause the wires to bend. For this 
reason, it will be appropriate to 
hold the wires in the middle from 
their bottoms and to push in the 
direciton of the arrow to lay down 
or bring them to vertical position. 
EN                           
						

							26
1021 eps
Adjusting the height of loaded 
upper basket
(depends on the model)
Basket adjustment mechanism on 
the upper basket of the machine is 
designed to allow you create wider 
areas in the upper or lover section 
of the machine based on your 
requirements by adjusting the height 
of the loaded basket in up or down 
directions without removing it from the 
machine. 
To raise the basket:
1. Grab one of the upper basket wires 
(right or left) and lift it up (A).
2. Repeat the same process to raise 
the other side of the basket.
3. Make sure that both sides of 
the basket height adjustment 
mechanism are at the same level 
(down or up).
To lower the basket:
1. Press the latch on the basket 
adjustment mechanism (right or 
left) to lower the basket (B).
2. Repeat the same process to lower 
the other side of the basket. 
3. Make sure that both sides of 
the basket height adjustment 
mechanism are at the same level 
(down or up).
\037
\036 
EN  
						

							27
1065 eps
\037
\036
Adjusting the height of loaded 
upper basket
(depends on the model)
Basket adjustment mechanism on 
the upper basket of the machine is 
designed to allow you create wider 
areas in the upper or lover section 
of the machine based on your 
requirements by adjusting the height 
of the loaded basket in up or down 
directions without removing it from the 
machine. 
To raise the basket:
1. Grab one of the upper basket wires 
(right or left) and lift it up (A).
2. Repeat the same process to raise 
the other side of the basket.
3. Make sure that both sides of 
the basket height adjustment 
mechanism are at the same level 
(down or up).
To lower the basket:
1. Press the latch on the basket 
adjustment mechanism (right or 
left) to lower the basket (B).
2. Repeat the same process to lower 
the other side of the basket. 
3. Make sure that both sides of 
the basket height adjustment 
mechanism are at the same level 
(down or up). 
EN