Barco Projector Cineversum 80 User Manual

							4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
Using the Remote Control
1. Point the Remote Control to the front of the Cine VERSUM Master or to the Cine VERSUM 80.
2. Press the standby button
. (image 4-9)
TheCineVERSUMMasterandtheCineVERSUM80gofromOPERATIONtoSTANDBY.
Image 4-9
4.3.2 From STANDBY mode to OPERATION mode
Using the Jog dial on the Cine VERSUM Master
1. Rotate the jog dial until “Power up” in the menu on the Cine VERSUM Master is pointed.
2. Press jog dial to activate the selection.
The Cine VERSUM Master and the Cine VERSUM 80 go from STANDBY to OPERATION, displaying the last selected source.
Using the Remote Control
1. Point the Remote Control to the front of the Cine VERSUM Master or to the Cine VERSUM 80.
2. Press the standby button
.
The Cine VERSUM Master and the Cine VERSUM 80 go from STANDBY to OPERATION, displaying the last selected source.
4.4 Switching the system between STANDBY and ECONOMIC Standby
Overview
 From STANDBY mode to Economic STANDBY
 From Economic STANDBY mode to STANDBY
4.4.1 From STANDBY mode to Economic STANDBY
Using the Jog dial on the Cine VERSUM Master
1. Press the jog dial once to enter the Power up menu. (image4-10)
2. Rotate the jog dial until “Economic” in the menu on the Cine VERSUM Master is pointed to. (image 4-11)
3. Press jog dial to activate the selection
The Cine VERSUM Master and the Cine VERSUM 80 go from STANDBY to Economic STANDBY. The economic standby is
visualized in the Master display with a Zzzzz-message with turned off backlighting. (image 4-12)
Image 4-10
Power up menuImage 4-11
Economic menu
R5976490 CINE VERSUM SYSTEM 1701200317 
						

							4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
Image 4-12
Economic standby
Using the Remote Control
1. Point the Remote Control to the front of the Cine VERSUM Master or to the Cine VERSUM 80
2. Toggle with the↑or↓arrow keys until “Economic” in the menu on the Cine VERSUM Master is pointed to (image 4-11).
3. PressENTERto activate selection.
The Cine VERSUM Master and the Cine VERSUM 80 go from STANDBY to Economic STANDBY. The economic standby is
visualized in the Master display with a Zzzzz-message with turned off backlighting (image 4-12).
4.4.2 From Economic STANDBY mode to STANDBY
Awaking the Cine VERSUM Master from the economic standby mode is only possible with the jog dial.
How to awake the Cine VERSUM Master
1. Press the jog dial once.
The Cine VERSUM Master and the Cine VERSUM 80 go from Economic STANDBY to STANDBY. (image 4-13, image 4-14)
2. Switching to operation mode, see From STANDBY mode to OPERATION mode, page 17.
Image 4-13
Economic standbyImage 4-14
Standby screen
4.5 Switching the system OFF completely and BACK to Operation mode
Overview
 Turning OFF the system from Operation mode
4.5.1 Turning OFF the system from Operation mode
How to turn OFF the system totally
1. First, switch the system in the standby mode (see From OPERATION mode to STANDBY mode, page 16).
2. Press the power switch on the Cine VERSUM 80 (image 4-2).
The Cine VERSUM 80 goes from standby to OFF.
3. Press the power switch on the Cine VERSUM Master (image 4-1).
The Cine VERSUM Master goes from standby to OFF.
18
R5976490 CINE VERSUM SYSTEM 17012003 
						

							4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
4.6 Turning ON the system from total OFF mode
How to turn ON the system back to Operation mode
1. Press the power switch on the Cine VERSUM Master (image 4-1).
The Cine VERSUM Master goes from OFF to standby. (image 4-15)
2. Press the power switch on the Cine VERSUM 80 (image 4-2).
The Cine VERSUM 80 goes from OFF to standby.
3. Turning on to operation mode, see From STANDBY mode to OPERATION mode, page 17.
Image 4-15
R5976490 CINE VERSUM SYSTEM 1701200319 
						

							4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
20R5976490 CINE VERSUM SYSTEM 17012003 
						

							5. Direct source selection
5. DIRECT SOURCE SELECTION
5.1 From standby mode
Using the digit buttons on the Remote Control
1. Make sure that the connected sources to the Cine VERSUM Master are turned on.
2. Using the digit button on the Remote Control, key in the corresponding slot number (from 1 to 8). (image 5-1)
The Cine VERSUM Master powers up and starts on its turn powering up the connected displays. Image of the selected source
appears on the display.
Image 5-1
Digit buttons on Remote Control
Using the standby button on the Remote Control
1. Make sure that the connected sources to theCine VERSUM Master are turned on.
2. Using the standby button
on the Remote Control, press the standby button. (image 5-2)
The Cine VERSUM Master powers up and starts on its turn powering up the connected display. The image of the last selected
source will be redisplayed on the connected dipslay.
Image 5-2
Standby button on Remote Control
R5976490 CINE VERSUM SYSTEM 1701200321 
						

							5. Direct source selection
5.2 Return to standby mode
How to return to standby remotely
1. Point the Remote Control to the front of the Cine VERSUM Master or the Cine VERSUM 80.
2. Press the standby button on the Remote Control again. (image 5-2)
The Cine VERSUM Master switches to the standby mode and switches on its turn the connected display into the standby mode.
When switching the Cine VERSUM 80 into the standby mode, a cool down period for the lamp of about 1
minute is activated. As a result, restarting of the lamp is not possible during the cool down period. This mode
is indicated by the standby LED which blinks at a beat of 0.3 on/0.3 off
22R5976490 CINE VERSUM SYSTEM 17012003 
						

							6. IMAGE CONTROL
6. IMAGE CONTROL
Image controls
The Brightness, Contrast, Sharpness (Detail), Color and Tint functions are directly accessible with the Remote Control.
The adjustment functions, when selected, display a slide bar overlayed on the source image.
It is useful to adjust the Brightness, whenever the ambient room lightning changes. The same is true for
Contrast. Please note that for the best result, it is advised to first change the Brightness, then the Contrast.
6.1 Brightness Control
How to adjust the Brightness
The Brightness function is used to adjust the overall light output. To adjust the Brightness, press the(+)or(-)side of the button
’BRIGHT’ (image 6-1.
The following barscale is overlayed on the source image,image 6-2.
Press the(+)button for a brightener image or the(-)button for a darker image.
If video or data is displayed with a black background, adjust until the background just appears (black becomes a very dark grey).
Image 6-1
Image 6-2
6.2 Contrast Control
How to adjust the Contrast
The Contrast function is used to adjust the contrast between the light and dark areas of the displayed image.
To adjust Contrast, press the(+)or(-)side of the button ’CONTR’ (image 6-3). The following barscale is overlayed on the source
image, image 6-4.
Press the(+)or(-)button until dark parts of the image show good detail.
If Contrast is set too high, the image loses detail and clarity. If set too low, it may be difficult to distinguish between foreground and
background information.
R5976490 CINE VERSUM SYSTEM 17012003
23 
						

							6. IMAGE CONTROL
Image 6-3
Image 6-4
6.3 Sharpness (Detail) Control
How to adjust the Sharpness
The Sharpness function is used to adjust the image sharpness of video signals when using a video decoder installed in the Cine
VERSUM Master.
To adjust the Sharpness, press the(+)or(-)side of the button ’SHARP’ (image 6-5). The following barscale is overlayed on the
source image,image 6-6.
Press the(+)or(-)button until the sharpest display is attained. Detail level should be roughly proportional to the input signal quality.
Higher levels of detail improve good quality levels. Low levels of detail reduce noise in poor quality signals.
Image 6-5
Image 6-6
24R5976490 CINE VERSUM SYSTEM 17012003 
						

							6. IMAGE CONTROL
6.4 Color (Saturation) Control
How to adjust the Color (Saturation)
The Color function is used to adjust color saturation levels and is only active for Video and S-Video sources.
To adjust Color, press the(+)or(-)side of the button ’COLOR’ (image 6-7). The following barscale is overlayed on the source image,
image 6-8.
Press the(+)or(-)button until the desired color saturation level is displayed. If color is set to a 0% level, the result will be black and
white picture. If the color is set too high, the color levels in the image will be over-powering.
Image 6-7
Image 6-8
6.5 Tint control
HowtoadjustTint(Hue)
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when using
the NTSC4.43 or NTSC 3.58 color system. For PAL and SECAM sources, Tint is not adjustable.
To adjust Tint, press the(+)or(-)side of the button ’TINT’ (image 6-9). The following barscale is overlayed on the source image,im-
age 6-10.
Press the(+)or(-)button until an optimal display is obtained. It is best to adjust tint while displaying an image with natural flesh
tones.
R5976490 CINE VERSUM SYSTEM 17012003
25 
						

							6. IMAGE CONTROL
Image 6-9
Image 6-10
26R5976490 CINE VERSUM SYSTEM 17012003