Barco Projector Cineversum 60 Quickstart Manual

7. Image Settings menu
How to change the saturation ?
1. Push the cursor key↑or↓to highlightSaturation. (menu 7-5)
2. PressENTERto select.
A slider box appears.
3. Use the cursor keys to adjust the saturation setting.
↑or→key for richer colors (higher values).
↓or←key for lighter colors (lower values).
Image settings
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color temperature
White peak Off
Back
Menu 7-5
7.6 Tint (hue)
About tint
The tint function is used to adjust color hue to obtain true...

7. Image Settings menu
How to change the tint ?
1. Push the cursor key↑or↓to highlightTint. (menu 7-6)
2. PressENTERto select.
A slider box appears.
3. Use the cursor keys to adjust the tint setting.
↑or→key for higher tint (higher values).
↓or←key for lower tint (lower values).
Image settings
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color temperature
White peak Off
Back
Menu 7-6
7.7 Sharpness
About Sharpness
The sharpness function is used to adjust the image sharpness of a video, S-Video and...

7. Image Settings menu
How to change the Gamma ?
1. Push the cursor key↑or↓to highlightGamma. (menu 7-8)
2. PressENTERto select.
The gamma selection menu appears. (menu 7-9)
Theactualactivegammavalueisindicatedbyanasterisk(*).
The default value is 2.2.
3. Push the cursor key↑or↓to highlight the desired gamma value.
4. PressENTERto select.
The new selected gamma value becomes active.
Image settings
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color temperature
White peak Off
Back
Menu 7-8
Gamma...

7. Image Settings menu
How to select a preset color temperature ?
1. Push the cursor key↑or↓to highlightColor temperature. (menu 7-10)
The color temperature menu will appear. (menu 7-11)
An asterisk (*) indicates the actual selected color temperature.
2. Push the cursor key↑or↓to highlight the desired color temperature.
3. PressENTERto select.
The selected color temperature of the image is adapted
Image settings
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color temperature
White peak Off
Back...

7. Image Settings menu
Image 7-1
Color gamut
The projector contains 2 international standards, EBU and ANSI, and its own color triangle (gamut) determined by the lamp and all
optical components of the projector. Colors outside this triangle cannot be displayed.
EBU
European Broadcasting Union. An organization of European broadcasters that, among other activities, produces tech-
nical statements and recommendations for the 625/50 line television system.
ANSI
American National Standards Institute
Selecting...

7. Image Settings menu
7.10 White peak
About white peak
In video centric applications true color reproduction is generallya priority over brightness. To achieve this a typical design will not
utilize a white segment of the color wheel. This has the side effect of reducing the amount of light allowed through the color wheel,
which reduces the overall brightness. To compensate for this a technique can applied called Spoke Light Capture (SLR). The spokes
are defined to be the time between colors. The DMD is...

8. Advanced Settings
8. ADVANCED SETTINGS
Overview
• Advanced settings menu overview
• Start up the Advanced settings
• Aspect Ratio
• Image Position
•Blanking
• Input Balance
8.1 Advanced settings menu overview
Overview
• Aspect ratio
-16:9
-4:3
-5:4
-2.35
-1.88
-1.78
- Letterbox
•Position
- Horizontal shift
- Horizontal size
- Vertical shift
-Verticalsize
• PiP configuration
•Blanking
• Input Balance
8.2 Start up the Advanced settings
How to start up ?
1. PressADJorENTERto start up menus. (menu 8-1)
2....

8. Advanced Settings
8.3 Aspect Ratio
Aspect ratio
horizontal & vertical dimension in which the window will be displayed, e.g. 4 by 3 or 16 by 9.
What can be done ?
The aspect ratio setting forces the projector toproject an image using a defined aspect ratio.
Aspect ratioDescription
16:9Wide screen television format / anamorphic format
4:3Standard television format
5:4Workstation format
2.35Panavision or Cinemascope format
1.88Cinema format
1.78Wide screen television format / anamorphic format...

8. Advanced Settings
Image 8-1
Different views for some typical input signals
(1) Standard television signal with 4:3 image information
(2) Standard television signal with 16:9 image information
When displaying DVD images stored as 4:3 anamorphic, select aspect ratioLetterbox.
When displaying DVD images stored as 16:9, select aspect ratio 16:9.
R5976763 CINEVERSUM 60/70 22042004
45 

8. Advanced Settings
How to change the aspect ratio ?
1. Push the cursor key↑or↓to highlightAspect Ratio. (menu 8-3)
2. PressENTERto select.
TheAspect ratiomenu will be displayed. (menu 8-4)
An asterisk (*) shows the actual selected aspect ratio.
3. Push the cursor key↑or↓to highlight the desired aspect ratio.
4. PressENTERto select.
The image changes accordingly.
Advanced settings
Aspect Ratio
Position
PiP Configuration
Blanking
Input Balance
Back
Menu 8-3
Aspect ratio
* 16:9
4:3
5:4
2.35
1.88
1.78...