Barco Projector Cineversum 110 User Manual

							14. Installation menu
Image 14-15
14.8 Security
What can be done ?
A security function is implemented in the projector that allows a protection against theft.
A PIN code allows the user to lock the projector in case of wrong code entry.
The PIN code must be entered at each start up (Power ON), entering three times a wrong number triggers a wait cycle of 15 minutes,
the second 3 wrong codes a wait cycle of 30 minutes, 1 hour, ...
The security mode can be enabled or disabled.
How to activate the security mode ?
1. PressMENUto activate the menu bar.
2. Press→to select theinstallationitem. (image 14-16)
3. Press↓to pull down the menu.
4. Use↑or↓to selectSecurity.
5. Press→to open the menu.
6. Use↑or↓to selectON.
On Security function enabled
Start up screen will contain the name of the owner of the projector.
PIN code will be necessary every time the projector lost power.
Off Security function disabled
7. PressENTER.
A dialog box is displayed. (image 14-17)
8. Use the arrow keys to selectYESand pressENTERto confirm.
A dialog box is displayed. (image 14-18)
The following things must be entered:
- Your name
- Company name
- Address or location
For more info about how to enter characters with the remote control, see Using the Dialog boxes, page 46.
9. PressACCEPT.
A dialog box is displayed.
Enter the PIN code, and confirm the newly entered PIN code. (image 14-19)
An informative text box is then displayed. PressENTERorBACKto escape. (image 14-20)
R5976697 CINEVERSUM™ 110 12/05/2004
127 
						

							14. Installation menu
Image 14-16
Security
Activating the security mode involves
the following things:
- The startup screen (identification window)
will contain a line withthe name of the
owner in it.
- You will be asked to enter a PIN code
every time the projector lost its power.
Are you sure you want to activate the 
Security mode
YESNO
Image 14-17
Security
Enter name of owner
e.g. Barco Educational Center
Image processing department
Brussels - Belgium
ACCEPTCANCEL
Image 14-18
Security
Enter your PIN:
Confirm your PIN code:
Image 14-19
Message
The security mode has been
activated.
Dont forget your PIN code!
Image 14-20
How to disable the security mode ?
1. PressMENUto activate the menu bar.
2. Press→to select theinstallationitem. (image 14-21)
3. Press↓to pull down the menu.
4.
Use↑or↓to selectSecurity.
5. Press→to open the menu.
6. Use↑or↓to selectOFF
7. PressENTERto confirm
An Enter PIN code dialog box will be displayed.
8. Enter your PIN code.
Whenthe PIN code is correct the security mode will be switched off.
128
R5976697 CINEVERSUM™ 110 12/05/2004 
						

							14. Installation menu
Image 14-21
R5976697 CINEVERSUM™ 110 12/05/2004129 
						

							14. Installation menu
130R5976697 CINEVERSUM™ 110 12/05/2004 
						

							15. Service
15. SERVICE
Overview
• Version Table
• Lamps and Power supply
• Board Identification
• Diagnostics
15.1 Version Table
What is possible ?
To get an overview of the different software and firmware version inside the projector.
How to get the version table
1. PressMENUto activate the menu bar. (image 15-1)
2. Press→to select theServiceitem.
3. Press↓to pull down the menu.
4. Use↑or↓to selectVersion table....
5. PressENTER.
An options dialog box opens. (image 15-2)
Image 15-1
Version table
Default program 01.00
Default program Backup 01.00
BootCode 01.00
Standard program 01.00
Standard Cpu Config 01.00
Standard Cpu Config Backup 01.00
PMP Config1 01.00
PMP Config2 01.00
Backplane Config
Character map01.00
01.00
Image 15-2
15.2 Lamps and Power supply
What is possible ?
To get an overview of the firmware version of the µC and the measured temperatures.
How to get the lamps and power supply overview ?
1. PressMENUto activate the menu bar. (image 15-3)
2. Press→to select theServiceitem.
3. Press↓to pull down the menu.
R5976697 CINEVERSUM™ 110 12/05/2004
131 
						

							15. Service
4. Use↑or↓to selectLamps and Power supply....
5. PressENTER.
An options dialog box opens. (image 15-4)
Image 15-3
Power Supply
µC version 004
Ambient Temp 016°C
Max Ambient Temp 045°C
Temp Lamp Driver 1 051°C
Temp Lamp driver 2 049°C
Image 15-4
15.3 Board Identification
What is possible ?
To get an overview of the board article numbers inside the projector.
How to get an overview ?
1. PressMENUto activate the menu bar. (image 15-5)
2. Press→to select theServiceitem.
3. Press↓to pull down the menu.
4. Use↑or↓to selectBoard Identification....
5. PressENTER.
An options dialog box opens. (image 15-6)
Image 15-5
Board Identification
PMP (Pixel Map Processor)
R764510
Backplane
R763437
Input layer 1
R763990
Input layer 2
R764091
Input layer 3
NetzteilR763456
B401034
Image 15-6
132R5976697 CINEVERSUM™ 110 12/05/2004 
						

							15. Service
15.4 Diagnostics
Overview
• I²C Diagnostics
• Lamps and power supply
15.4.1 I²C Diagnostics
What can be done ?
The I2C bus allows the diagnostic of different hardware components
How to display the diagnostics menu ?
1. PressMENUto activate the menu bar.
2. Press→to select theServiceitem. (image 15-7)
3. Press↓to pull down theServicemenu.
4. Use↑or↓to selectDiagnostics.
5. Press→to pull down the menu.
6. Use↑or↓to selectI²C.
7. PressENTERto select I
2C.
A text box is displayed. (image 15-8)
Items with a green icon are OK. Items with a red icon have a problem.
8. Use the↑or↓keys to scroll inside the list.
Image 15-7
I2C Diagnostics
Device Slave address
Lamp driver I2C Diagnostics
0x78
Lamp Eeprom 0xA0
Power Supply 0x30
I2C Mulitplexer 0xE0
Red Formatter 0x34
Green Formatter 0x36
Blue Formatter 0x38
Motor driver 0x1A
Image 15-8
15.4.2 Lamps and power supply
What can be done ?
This menu item gives an overview of the lamp and power supply errors.
How to display the overview menu ?
1. PressMENUto activate the menu bar.
2. Press→to select theServiceitem. (image 15-9)
3. Press↓to pull down theServicemenu.
4. Use↑or↓to selectDiagnostics.
R5976697 CINEVERSUM™ 110 12/05/2004
133 
						

							15. Service
5. Press→to pull down the menu.
6. Use↑or↓to selectLamps and power supply.
7. PressENTERto selectLamps and power supply.
A text box with errors is displayed. (image 15-10)
Image 15-9
Lamps and power supply
Projector runtime
64 : lamp 2 error
65 : lamp 1 & 2 error
70 : lamp 1 errorHistory Description
Image 15-10
134R5976697 CINEVERSUM™ 110 12/05/2004 
						

							16. Adjustment menu (check up)
16. ADJUSTMENT MENU (CHECK UP)
Overview
• Internal patterns
• Convergence
•More..
All items in the adjustment menu are given for check up. No adjustments are possible.
16.1 Internal patterns
How to select ?
1. PressMENUto activate the menu bar.
2. Press→to select theAdjustmentitem. (image 16-1)
3. Press↓to pull down theAdjustmentmenu.
4. Use↑or↓to selectInternal patterns.
5. Press→to pull down the menu.
6. Use↑or↓to select the desired test pattern.
The following test patterns are available:
-Purity
-Outline
-Hatch
- Color bars
- Checkerboard
- Full white
-HGBWS
- Character set
7. PressENTERto select.
The selected test pattern will be displayed.
Image 16-1
16.2 Convergence
Only for check up of the convergence, no adjustment is possible in the field. When a convergence problem
occurred, contact a Barco service center.
R5976697 CINEVERSUM™ 110 12/05/2004135 
						

							16. Adjustment menu (check up)
How to select ?
1. PressMENUto activate the menu bar.
2. Press→to select theAdjustmentitem. (image 16-2)
3. Press↓to pull down theAdjustmentmenu.
4. Use↑or↓to selectConvergence.
5. Press→to pull down the menu.
6. Use↑or↓to select the desired convergence test pattern.
7. PressENTERto select.
The selected test pattern will be displayed.
Image 16-2
16.3 More..
Access
The items covered by More are only accessible for service technicians with a special key code.
136
R5976697 CINEVERSUM™ 110 12/05/2004