Barco Projector Cineversum 110 User Manual

3. Connections
How to select the DVI Input ?
1. Press5on the RCU
Note:Another way for selecting this input is viaSourceon the local keypad or via the Menu.
3.7 Computer input (RGB analog)
Input specification
TTL sync input : Umin=2.0V
RGB input = 0.7 V
pp±3dB
R/PRG/YB/PBHs/CsVsVIDEO
SDI
INSDI
OUTS-VIDEO
R.C.DVI ANALOG RGB RS 232 C
Image 3-11
Analog RGB input
What can be connected ?
•RGBHV
•RG
SB
CompositesynconlypossibleonGreen
How to select a computer input ?
1. Press2on the RCU
Note:Another way for...

3. Connections
R/PRG/YB/PBHs/CsVsVIDEO
SDI
INSDI
OUTS-VIDEO
R.C.DVI ANALOG RGB RS 232 C
Image 3-12
How to select the SDI input
1. Press7on the RCU
Note:Another way for selecting this input is viaSourceon the local keypad or via the Menu.
3.9 RS232 IN connection
What can be connected to the RS232 IN connection ?
The RS232 IN connection allows the projector to communicate with a computer e.g. IBM PC or Apple Macintosh.
R/PRG/YB/PBHs/CsVsVIDEO
SDI
INSDI
OUTS-VIDEO
R.C.DVI ANALOG RGB RS 232 C
Image 3-13...

3. Connections
3.10 Extended configuration
Overview
• Introduction
• 5-cable extended configuration
• S-Video extended configuration
• Summarizing
3.10.1 Introduction
What can be done ?
The extended configuration allows to connect multiple equal source types to the inputs and allow switching between this wide range
of input signals.
3.10.2 5-cable extended configuration
What can be done ?
Beside the standard RGB, composite & sync signals, the extendedcapabilities of the 5-cable inputs make treatment of...

3. Connections
Multiple video signals can not be visualized simultaneously since there is only one decoder.
3.10.3 S-Video extended configuration
What can be done ?
Beside the standard luminance (Y) and chrominance (C) signals, theadvanced capabilities of the S-Video input make treatment of
additional signals possible:
• 2 composite video signal may be connected.
Inputs
YC
S-VideoYC
Composite VideoVideo-
Signals
Composite Video-Video
Table 3-6
Extended configuration of the S-Video input: the first column...

3. Connections
1. S-Video 1: via the standard S-Video input
2. S-Video 2 : via the 5
thBNC and the standard Composite Video input
3. S-Video 3 : via the 1st and the 3rd BNC
Key4on the RCU allows to browse through the active S-Video inputs, each hit moves to the next active video input. The first hit on
key 4 selects the last selected video input.
R5976697 CINEVERSUM™ 110 12/05/2004
31 

3. Connections
32R5976697 CINEVERSUM™ 110 12/05/2004 

4. Getting Started
4. GETTING STARTED
Overview
• Terminology overview
• Switching on
• Lamp runtime
• Switching to standby
• Switching off
• Temperature error DMD
•UsingtheRCU
• Projector address
• Controlling the projector
• Quick lens adjustment
• Digital Zoom
4.1 Terminology overview
Overview
The following table gives an overview of the different functionalities of the keys.
R5976697 CINEVERSUM™ 110 12/05/2004
33 

4. Getting Started
F1F2
F3
MENU
BACK
ENTER
PAUSEPIP
PHASE
TINT
COLOR
BRIGHTN
CONTR
VOL90
78
56
3
4
12
LOGO
AUTO IMAGE
DIGI
ZOOM
SDI
SB-PC
DVI
VIDEO S-VIDEO
RGBPC
LENS
ZOOMLENS
SHIFT
LENS
FOCUS
TEXT
121
19
2
3
4
5
6
7
8
9
10
11
12
1316
14 15 1820
17
Image 4-1
Led 1
Led 2
Led 3
6
23
22
Image 4-2
34R5976697 CINEVERSUM™ 110 12/05/2004 

4. Getting Started
No.Key nameDescription
1Function keysuser programmable keys with functions for direct access.
2MENUMenu key, to enter or exit the Tool bar menu.
3Address key(recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9.
4LOGO keyallows to recall the stored Logo (not in PiP mode)
5PA U S Eto stop projection for a short time, press ’PAUSE’. The image disappears but full power...

4. Getting Started
4.2 Switching on
How to switch on.
1. Press the power switch to switch on the projector.
- When ’0’ is pushed in, the projector is switched off.
- When ’1’ is pushed in, the projector is switched on
The projector starts in standby mode, LED3 is 0.2 sec on and 2 sec off.
Starting image projection.
1. PressStandbykey once on the local keypad or on the remote control.
Note:It may take about 60 seconds before image projection, i.e. no projection until the completion of several operations...