Barco Projector Cineversum 110 User Manual

2. Installation Guidelines
Image 2-6
2.6.4 Cleaning the lens
To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have de-
veloped recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from
the lens by blowing it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
To r a y s e eTMcloth (delivered together with the lens kit). Order number : R379058.
Howtocleanthelens?
Proceed as...

2. Installation Guidelines
Image 2-8
Ceiling mount extension support
For more details about the ceiling mount extension supports, see theconcerning installation manual.
2.8 Battery Insertion in the Remote Control
Where to find the batteries
The batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life
time.
How to install the batteries
1. Push the cover tab (A) with the fingernail a little backwards and pull upwards the cover top...

2. Installation Guidelines
Image 2-11
Battery removal
R5976697 CINEVERSUM™ 110 12/05/200419 

2. Installation Guidelines
20R5976697 CINEVERSUM™ 110 12/05/2004 

3. Connections
3. CONNECTIONS
Overview
• Power connection
• Input source connection
• 5-Cable input
• Composite Video Input
• S-Video input
• Digital Visual Interface (DVI) input
• Computer input (RGB analog)
• Serial Digital Interface
• RS232 IN connection
• Extended configuration
3.1 Power connection
3.1.1 Supplied Power Cords
The following power cords are added to the product
In the package of each product, two power cords are added, one with a plug shape, reference standard ANSI C73.11, and one with...

3. Connections
A 12Image 3-3
Projector covers removal
A Quarter turn fastener
1 Rear cover
2 Power input cover
A
B
Image 3-4
Power connection
A Right angle power socket
B Power cable routing
AC Power Specifications
AC Power VoltageAuto Range 90 – 240V
AC Power Current7.0 A – 2.9 A/ 50–60Hz
Main FuseMain Power Supply: T15A H 250V
Power Consumption
Normal operation mode650 W (Dual lamp)-355 W (Single lamp)
Standby mode14 W
3.2 Input source connection
Overview
• Input section
• Input facilities
3.2.1 Input...

3. Connections
3.2.2 Input facilities
overview
• 5–cable input
- component video (PR/Y/PB)
-RGBS
• composite video
•S-Video
• Digital Visual Input (DVI)
• Computer (analog RGB)
• Serial Digital Input with loop through connection
R/PRG/YB/PBHs/CsVsVIDEO
SDI
INSDI
OUTS-VIDEO
R.C.DVI ANALOG RGB RS 232 C
L1
L2
L3
Image 3-5
Input facilities
L1 Layer 1 = RGBHV + Composite Video + S-Video
L2 Layer 2 = DVI + Computer + RS232IN + RC (wired remote control)
L3 Layer 3 = SDI in and out
3.3 5-Cable input
Input...

3. Connections
Component Video
In Component Video the term component describes a number of elements that are needed to make up the video pic-
ture, these components are PR/Y/PB. A composite video signal on the other hand contains all the information needed
for the color picture in a single channel of information
Which signals can be connected ?
Signals/Input BNCRGBHV
RGBHVRGBHV
RGsB1RGsB--
RGBS1RGBS-
ComponentPRYPB--
Beside the standard RGB, component and sync signals, the extended mode of the 5 Cable...

3. Connections
How to select a Composite Video Input ?
1. Press3on the RCU
Note:Another way for selecting this input is viaSourceon the local keypad or via the Menu.
The projector allows the input of more composite video signals (up to 7 composite video signals) when using
the 5 cable input in extended configuration. Press 3 to browse through the possible video sources.
3.5 S-Video input
Input specification
R/PRG/YB/PBHs/CsVsVIDEO
SDI
INSDI
OUTS-VIDEO
R.C.DVI ANALOG RGB RS 232 C
Image 3-8
S-Video...

3. Connections
How to select the S-Video input ?
1. Press4on the RCU
Note:Another way for selecting this input is viaSourceon the local keypad or via the Menu.
The projector allows the input of more S-Video signals (up to 3 S-Video signals) via the S-Video extended
configuration.
3.6 Digital Visual Interface (DVI) input
DVI
Digital Visual Interface is a display interface developed in response to the proliferation of digital flat panel displays.
The digital video connectivity standard that was developed...