Bang & Olufsen Television Beovision 4 User Manual

BeoVision 4 
Guide  

WARNING: To reduce the risk of fire or 
electric shock, do not expose this 
appliance to rain or moisture. Do not  expose this equipment to dripping or 
splashing and ensure that no objects 
filled with liquids, such as vases, are  placed on the equipment. To completely disconnect this equipment from the AC 
Mains, disconnect the mains plug from 
the wall socket. The disconnect device  shall remain readily operable.
The lightning flash with arrowhead  symbol within an equilateral triangle, is intended to...

Dear Customer 
This Guide contains information about the daily use of your Bang & Olufsen product. We expect your retailer to deliver, install and set up your product. 
On the Bang & Olufsen website you can find further information about your  product. 
The needs of the user are considered carefully when designing and developing  Bang & Olufsen products. Therefore, please take the time to tell us about your experience with your product. 
To contact us, visit our website on …    www.bang-olufsen.com 
or...

Motorised stand 
You can make different settings for your T V, such as favourite viewing and listening positions if your T V is equipped with an optional motorised stand. During first-time 
setup you are prompted to calibrate your stand. 
Calibrate the stand 
During first-time setup, the STAND ADJUSTMENT  menu appears. The motorised movement of the 
T V will not work until the calibration process  has been completed. 
Positions of the TV 
Programme a position for when you watch T V, listen to music, and...

Turn/tilt the TV On/off positions 
You can turn or tilt your T V without storing the  position. 
When the T V is switched to standby, the loud -
speaker retracts and the screen moves down. 
When the T V is switched on, the screen moves up  and the loudspeaker will appear below the screen.  Auto stop: For your safety, the built-in automatic 
sensors will make the screen and loud  
speaker stop 
if anything obstruct their movement. Remove the  object and press • to continue switching the T V 
on or off....

Automatic calibration  
Approximately for every 100 hours of use, the 
T V will initiate a calibration automatically, when  you press the standby button. 
Manual calibration  
The T V must be switched on for more than two  minutes and be in T V mode for the AUTO 
COLOUR MANAGEMENT menu to be available.   We recommend that you let the T V perform calibration automatically instead of manually 
Information 
1*Manual calibration  
Calibration failed    
Auto Colour Management ensures perfect colours on the...

We expect your retailer to deliver, install and set up your product. However, regular maintenance, such as cleaning, is the responsibility of the user. To achieve the best 
result, follow the instructions below. 
Maintenance 
Cleaning instructions
Cautions 
7
Cabinet surfaces Wipe dust off the surfaces using a dry, soft cloth. Remove grease stains or persistent dirt with a soft, lint-free, firmly wrung cloth, dipped in a 
solution of water containing only a few drops of  mild detergent, such as...

For the US-market only! NOTE: This equipment has been tested and found 
to comply with the limits for a class B digital  device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable  protection against harm  
ful inter 
ference in a 
residential   installation. This equipment generates, 
uses and can radiate radio frequency energy and, 
if not installed and used in   accordance with the 
instructions, may cause harmful interference to  radio communications. However,...

9