Avio Mp-20e Multi Projector Users Manual

							E-21
Connection of the Power Cable and On/Off Switching
Switch On the Power
1Connect the power cable
The projector will enter the standby mode and
the ON/STANDBY LED will light in red.
2Press the POWER button ()
Switch Off the Power
1Press and hold the POWER button () for 1 second or longer
Press POWER button again to turn off will appear on the projection screen.
2Press the POWER button () one more time.
The lamp will go off.
•The LAMP/COVER LED flashes green and then goes off after about 60
seconds.
The ON/STANDBY LED lights in resistance.
•When the lamp is off, pressing the POWER button while the LAMP/COVER LED is flashing green will not switch the lamp
on again.
To switch the lamp on again, please press the POWER button again after the ON/STANDBY LED lights in red.
3Disconnecting the Power Cable
The ON/STANDBY LED on the operation panel will go off. The projector is now able to make a projection.
3Switch on the power of the connected equipment
•Do not disconnect the power cable while the lamp is on or while the ventilation fan is turning.
•Unplug the power plug of the projector from the wall outlet when the projector will not be used for an
extended period.
•When the reinserting the power plug into the outlet soon after having unplugged it, please allow a fixed
time (of about 10 seconds) before doing so.
CAUTION
Operation with the
ProjectorOperation with the
Remote Control
To wall outlet.
The fan will turn, the lamp will light, and the ON/STANDBY
LED will light in green. The LAMP/COVER LED will light in
green.
•If the LED lights in red after the POWER button is pressed,
projector trouble is indicated.
→ See Page E-39
•Check that the lens cap has been removed before pressing
the POWER button.
Operation with the
ProjectorOperation with the
Remote Control 
						

							E-22
Adjustment of the Projection Image
Adjust the projection image to the screen.
Adjusting the Projection Image
•When the image is shifted to the left or right, move the projector horizontally. (Align the center of the screen with the center of the
projector lens.)
•When the image is shifted up or down, use the tilt foot to adjust the projector vertically.
•When the image is slanted, turn the left or right tilt foot to adjust.
•When there is keystone distortion of the image, adjust with Keystone of the menu operations. → See Pages E-32 and E-37.
Making Focus/Zoom Adjustments
Turn the focus ring/zoom lever of the projection lens and adjust the projection image.
Adjusting the Tilt (Slant)
Adjustment of the tilt foot allows the position and slant
of the projection image to be adjusted.
Press the left-right tilt adjustment lever and raise the
front of the projector. Release the lever when the de-
sired height has been reached. Rotating the lowest
portion of the tilt foot permits fine adjustments to be
made. The tilt foot are lengthened by rotated to the left
and shortened by rotated to the right.
•Do not lengthen the tilt foot on only one side which would place the projector on an extreme slant. Doing
so could result in the projector slipping or falling over and could cause an accident or breakdown.
•When moving the projector, be sure to return the tilt foot to the original position.
•The air intake vents on the side of the projector draw in cooling air with a strong air current. When cloth
or paper adheres to and covers the air intake vents, the internal temperature rises and could cause an
accident or breakdown.
•Depending upon the material of the placement location, the rubber feet may soil on the placement
surface.
CAUTION
Right angle
UpDown 
						

							E-23
Regular Operation
This section describes the use of direct operation using the projector and remote control buttons.
Please see the items on Page E-31 Menu Operation Method and Page E-34 Menu Description for information
about operation using the menu.
Select the Input
Operation with the Projector
Select the input using the INPUT SELECT buttons.
Each press switches the input one step in the sequence
of OHP → PC → VIDEO.
Operation with the Remote Control
Select the input using the INPUT SELECT buttons.
NOTE: The input mode at starting time will be the same as it was the last time the projector was switched off. When the power of the projector is switched on, the input selection (OHP / PC / VIDEO) icon is displayed.
Adjusting the Volume
Operation with the Projector
Volume adjustment cannot be made at the operation
panel of the projector.
Operation with the Remote Control
Adjust using the VOLUME (+/-) buttons.
Effective only During PC and VIDEO Input
NOTE: Once the volume adjustment bar has been displayed, it will disappear when 10 seconds have passed without a
volume adjustment operation being made.Volume adjustment bar
OHPPCVIDEO 
						

							E-24
Still Image Display
Regular Operation
This operation freezes the currently projected image.
Operation with the Projector
Press the FREEZE/CAPTURE button.
Operation with the Remote Control
Press the FREEZE/CAPTURE button.
Cancelling the Still Image Display
Operation with the Projector
Press the FREEZE OFF button. NOTE:
•The FREEZE LED is lit green during the still image display.
•A press of the FREEZE/CAPTURE button while a moving image is projected will result in a still image display at the
existing zoom magnification and position.
•A press of the FREEZE/CAPTURE button at the time of still image of OHP will result in a return of the zoom magnification
and position to the original condition.
•A press of the projector INPUT SELECT buttons or one of the remote control OHP / PC / VIDEO buttons during a still
image display will cancel the still image of the PC or video deck. OHP will retain the still image.
Adjusting the Brightness
NOTE: Once the brightness adjustment bar has been displayed, it will disappear after 10 seconds if there is no brightness
adjustment. Brightness adjustment barOperation with the Projector
Adjust using the BRIGHTNESS (
) buttons.
 : Projection image becomes brighter
  
: Projection image becomes darker
Operation with the Remote Control
Adjust using the BRIGHTNESS (+)/(-) buttons.
 (+) : Projection image becomes brighter
  
(–) : Projection image becomes darker
To change the brightness, perform a manual adjustment using the method described below.
NOTE: The FREEZE LED will go off when the still image display is cancelled.Operation with the Remote Control
Press the FREEZE OFF button. 
						

							E-25
Changing the Orientation of the Projection ImageEffective Only with OHP Input
This operation switches the (ver tical/horizontal) orientation of the currently projected image.
The display of the switched screen is adjusted to match the width.
To view the portion that has been cut off
Operation with the Projector
Press the SCROLL (
) buttons and scroll the projec-
tion image up or down.
Operation with the Remote Control
Press the SCROLL (
) buttons and scroll the projec-
tion image up or down.
NOTE: When the orientation of the projection image is changed, even if the zoom function is in use, the display of the switched
screen will be adjusted to match the width, the same as with regular changes of orientation.
Regular Operation
Operation with the Projector
Press the PORTRAIT button.
Operation with the Remote Control
Press the PORTRAIT button.
A
B
C
A
B
C
•Pressing the ZOOM (–) button permits display of a large portion within the read-
ing range of the vertical display. The undisplayed por tion can be displayed with
the SCROLL (
) buttons. 
						

							E-26
Capturing the Projection Image
A press of the FREEZE/CAPTURE button captures the currently projected OHP image and saves it as one or more
images.
The captured image is automatically stored in the projector’s internal memory as up to 4 OHP images; thereafter, each
time an image is captured, the oldest image will be replaced with the latest image.
Regular Operation
Effective Only with OHP Input
1234
Viewing captured imagesOperation with the Projector
A list display of captured images is not available from
the operation panel of the projector.
Operation with the Remote Control
Press the THUMBNAIL button.
Full-screen Display of Thumbnail Images
Operation with the Projector
A full-screen display of captured images is not available
from the operation panel of the projector.
Operation with the Remote Control
Select the images that you would like to display full screen
using the SCROLL (
) buttons and press the
POINTER/SET button.
12
34
12
34
NOTE: The FREEZE LED is lit orange during the thumbnail display.Each capture of a new image causes an old
image to be deleted. 
						

							E-27
Enlarging and Reducing the Projection Image
This operation enlarges or reduces the size of projected image.
During OHP input, adjustment from the same size to 6.25 times (length ratio 2.5 times) is permitted, while during PC
or VIDEO input, adjustment from the same size to 16 times (length ratio 4 times) is permitted.
Regular Operation
Operation with the Projector
Press the ZOOM button.
: Enlarge the size of the projected image
: Reduce the size of the projected image
Operation with the Remote Control
(+): Enlarge the size of the projected image
(–): Reduce the size of the projected image
Moving the Screen
Operation with the Projector
Press the SCROLL (
) buttons.
Operation with the Remote Control
Press the SCROLL (
) buttons. Movement is possible in 4 directions (up, down, left, and right). 
						

							E-28
Displaying the Pointer
Regular Operation
This operation displays the pointer in the currently projected image.
Deleting the Projection Image and Audio
This operation deletes the currently projected image and audio without switching off the lamp.
Operation with the Projector
The ability to delete the projection image is not available from the
operation panel of the projector.
Operation with the Remote Control
Press the MUTE button.
NOTE: When a fixed period of time elapses (about 30 minutes) with the video/audio muted, a message will be displayed to
check whether to shut down the projector. Selection of Yes will set the projector to the standby mode, while a selection of
No will again delete the video/audio.
When there has been an absence of an operation for 15 seconds during the display of the above confirmation message,
the projector automatically enters the standby mode.
Operation with the Projector
The ability to turn on and turn off the pointer is not avail-
able from the operation panel of the projector.
Operation with the Remote Control
Press the POINTER/SET button.
One more press of the POINTER/SET button while the
pointer is displayed will turn off the pointer display.
Moving the Pointer
Operation with the Projector
Press the SCROLL (
) buttons.
Operation with the Remote Control
Press the SCROLL (
) buttons.
See Page E-34 for information about the form, color, and size of the pointer.
NOTE:
•When the brightness is adjusted while the pointer is displayed, the pointer will disappear temporarily; however, it will
reappear soon.
•Pressing the POINTER/SET button again during the history display will result in the reappearance of the pointer. 
						

							E-29
Method of OHP Operation
The maximum reading size of documents and printed material is 216 mm high
by 288 mm wide.
Consequently, when A4 paper (210 mm high and 297.5 mm wide) is placed on
the projector, reading will be as illustrated in the diagram below (which depicts
the area that can be projected as the portion with diagonal lines).
Attaching the Document Cover
The mounting orientation of the document cover can be changed
to the opposite direction in accordance with the circumstances
circumstances.
Preparation of the Projection Document
The document (printed material) that is to be projected is placed on the projector as illustrated in the diagram below
and the document cover is closed.
NOTE:
•The document can be projected even when the document cover has not been closed; however, in this instance, unnec-
essary items may be projected which will make the image difficult to view.
•When paper having luster such as magazine covers are placed on the projector, the internal fluorescent lamp light will be
picked up and the edges of the projected document may be messy.
Reading Size of Projection Documents
The portion that falls outside of the reading range will not be projected;
therefore, shift the paper as required.
Other functions that are used in the OHP operation can be seen on the following pages:
● Switching the input to OHP → See Page E-23
● Changing the projection image to a still image display → See Page E-24
● Capturing a projection image → See Page E-26
● Viewing captured images → See Page E-26
NOTE: When removing the document cover, lift the cover by
both hands and remove it.
Horizontal document  Top side
Vertical document
Top side
A4 Paper
297 mm (Paper size)
288 mm (Reading size)
216 mm (Reading size)
210 mm (Paper size) 
						

							E-30
Menu Configuration
Pntr setting
Image adjustmentSettings
OHP/ PC / VIDEO CommonDuring OHP Input OHP / PC / VIDEO Common
During PC Input
During VIDEO  Input
This item is added only when the menu
is displayed during the full-screen dis-
play of the OHP history.
The adjustment/setting items and content will differ depending on the input selection and the permitted information will
be displayed on the menu for that input mode.