Home > ATT > Communications System > ATT Spirit 2448 Communications System Line And Station Cards Installation Instructions

ATT Spirit 2448 Communications System Line And Station Cards Installation Instructions

Add to Favourites
    Download as PDF

    View the ATT Spirit 2448 Communications System Line And Station Cards Installation Instructions for free. All the ATT manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 AT&TSPIRIT® Communications System Model 2448 Line and Station Cards Installation Instructions WARNING: The SPIRIT® Communications System Model 2448, Line and Station Cards must be installed by an AT&T service technician or a qualified installer. Introduction These instructions will show you how to install 4-line or 8-station expansion cards into the controller or expansion unit of your SPIRIT® Communications System, Model 2448. Please read the instructions carefully before beginning installation. What...
    Page 2 n Remove the line or station card from its box and protective packaging. CAUTION: HANDLE THE CARD BY THE PLASTIC FACEPLATE ONLY. STATIC DISCHARGE CAN DAMAGE THE CARDS. n Insert the card into the appropriate slot (LINE or STATION) in the controller. Holding the plastic faceplate, align the back edge of the card with the grooves on the controller. Push the card firmly in until the mating connectors are fully engaged. The card is installed when the plastic faceplate is flush with the surrounding controller...
    Start reading ATT Spirit 2448 Communications System Line And Station Cards Installation Instructions

    Related Manuals for ATT Spirit 2448 Communications System Line And Station Cards Installation Instructions

    All ATT manuals