Home
>
ATT
>
Communications System
>
ATT Definity G1, G3, System 75, 7410 Plus Voice Terminal Instructions Manual
ATT Definity G1, G3, System 75, 7410 Plus Voice Terminal Instructions Manual
Here you can view all the pages of manual ATT Definity G1, G3, System 75, 7410 Plus Voice Terminal Instructions Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 21
Send All Calls To send all calls (except 1Press [ Send All Calls ] (while on-hook) priority calls) immediately or Dial Send All Calls code to coverage [confirmation tone] Note: You may hear a ring-ping tone from your voice terminal as each call is forwarded. To cancel Send All Calls 1Press [ Send All Calls ] again (while on-hook) or Dial Send All Calls Cancel code [confirmation tone] Speaker (and Speaker Volume)4 To place a call without lifting the handset, or to use speaker with any listening-only...
Page 22
To change from handset1While handset is off-hook, press [ Speaker ] to speaker lYou can now hang up handset and call will remain active on speaker To end a call while 1With handset on-hook, press [ Speaker ] to end call speaker is active Transfer4 To send present call to1Press [ Transfer ][dial tone] another extension orlPresent call is put on hold outside number 2Dial number that call is to be transferred to [ringback tone] lRemain on line and announce call; if no answer or busy, return to held call...
Page 23
Voice Message Retrieval To retrieve your voice1 messages when your Message light is on 2 3 4Dial the Voice Message Retrieval code [dial tone] Press [ # ] [voice prompting] Note: Do not press [ # ] if calling from someone else’s extension; instead, dial your own extension number and your security code, if required. Move through the messages with these dial pad buttons: (Press [ # ] to retrieve first message) [ # ] NEXT (read next message) [ 3 ] DELETE (erase from storage) [ 4 ] HELP (request...
Page 24
Tones and Their Meanings Ringing tones are produced by an incoming call. Handset tones are those which you hear through the handset (receiver). Ringing Tones l1 ring — A call from another extension. l2 rings — A call from outside or from the attendant. l3 rings — A priority call from another extension, or from an Automatic Callback call you placed. lring-ping (half ring, not repeated) — A call redirected from your voice terminal to another because Send All Calls or Call Forwarding All Calls is active....
Page 25
Troubleshooting Problem A feature doesn’t work as noted in the book.1 2 3 4 There are no Feature Codes (such as Call Forward code or Send All Calls code) written in the appropriate blanks in this guide. Problem There’s no dial tone.Solution Reread the procedure and try again. For many features you must lift the handset before you can use the feature. Check with your System Manager to be sure this feature is administered on your voice terminal. You may have an older version of the System 75 software so...
Page 26
ProblemSolution The telephone1 Set the ringer volume to a higher level. doesn’t ring. 2Place a test call from another extension to your extension. 3 Check the line cord to make certain that it is securely connected at both ends. 4 If there is still a problem, see your System Manager. The lights do not1 Check the line cord to make certain that it is securely go on next to the connected at both ends. buttons. 2 If there is still a problem, see your System Manager. System 75 Version Notes If you have...
Page 27
Key Words to Know activate To begin or turn on the operation of a feature. attendant The person who handles incoming and outgoing calls at the main console. AUDIX Audio Information Exchange, an optional voice mail and message service that provides coverage for calls to you by recording callers’ messages and reporting Leave Word Calling messages. call appearance A button used exclusively to place, receive, or hold calls. It has an assigned extension number and is equipped with a red in-use light and a...
Page 28
party A person who places or answers a call. personal list One of the 4 types of Abbreviated Dialing lists; programmable by the System Manager or by you, the user. Contains phone numbers of your choice, and stores each of them as a single-digit list item. personal list item One of the 10 available slots on an Abbreviated Dialing personal list. The first nine personal list items are given digits 1 to 9, with 0 for the tenth item. pickup group A group of voice terminal users who can answer calls for...
Page 29
Quick Reference Lists Feature Codes Feature ABBREVIATED DIALING List 1 List 2 List 3 Program CALL FORWARDING ALL CALLS Cancel CALL PARK Answer Back CodeFeature CALL PICKUP LAST NUMBER DIALED LEAVE WORD CALLING Cancel PRIORITY CALLING SEND ALL CALLS Cancel VOICE MESSAGE RETRIEVAL Coverage Code 26
Page 30
Trunk Codes Abbreviated Dialing* DescriptionCode 1 Miscellaneous DescriptionExtension AttendantItem Personal List 1Personal List 2Personal List 3 No.NameNameName 2 3 4 5 6 7 8 9 0 *You may have as many as 3 personal lists, and each list can have either 5 or 10 items; see your System Manager