Home > ATT > Communications System > ATT DEFINITY Communications System Generic 3 Pocket Reference Instructions Manual

ATT DEFINITY Communications System Generic 3 Pocket Reference Instructions Manual

Here you can view all the pages of manual ATT DEFINITY Communications System Generic 3 Pocket Reference Instructions Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 21

FEATURES
Feature
Off-Premises Station
PC Interface
PC/PBX Connection
Personal Central
Office Line (PCOL)
Personalized Ringing
Power Failure
Transfer
Priority Calling
Privacy — Attendant
Lockout
Privacy — Manual
Exclusion
Property Management
System Interface
Pull Transfer
Queue Status Indications
Recall Signaling
Recent Change History
Recorded Announcement
Recorded Telephone
Dictation Access
Redirection On No
Answer (RONA)
Remote Access
Report Scheduler and
System Printer
Restriction —
Controlled...

Page 22

FEATURES
Feature
Restriction —
Miscellaneous Trunk
Restriction — Toll
Restriction — Voice
Terminal—Inward
Restriction — Voice
Terminal —
Manual Terminating
Line
Restriction — Voice
Terminal—Origination
Restriction — Voice
Terminal—Outward
Restriction — Voice
Terminal—Public
Restriction — Voice
Terminal—Termination
Ringback Queuing
Ringer Cutoff
Rotary Dialing
R2-MFC
Security Violation
Notification (SVN)
Send All Calls
Senderized Operation
Service Observing
Single-Digit Dialing and
Mixed Station Number-...

Page 23

FEATURES
G3vs
G3vsG3s
G3s
Feature
ABPPBP
ABPPBPG3iG3r
System Status Report
SSSSSS
Temporary Bridged
S
SSSSS
Appearance
Terminal Translation
V2V2V2V2V2
S
Initialization
Terminating ExtensionSS
SSSS
Group
Through Dialing
S
SSSSS
Time of Day Routing
O18O18O18O18O18O18
Timed Reminder and
S19S19S19S19S19S19
Attendant Timers
Touch-Tone Dialing
S
SSSSS
Transfer
SSSSSS
Transfer OutgoingV220V2V220V2V2S
Trunk
to Outgoing Trunk
Traveling Class
N/AO
N/AO00
Marks (TCMs)
Trunk Flash
S
SSSSS
Trunk Group
SS
SSSS...

Page 24

FEATURES
Feature
Unrestricted Uniform
Dial Plan (UDP)
Visually Impaired Atten-
dant
Services (VIAS)
Voice Message Retrieval
Voice Response
Integration
Voice Terminal Alerting
Options
Voice Terminal Display
Wideband Switching
World Class Tone
Detection
World Class Tone
Generation
G3vs
ABP
NA
V2
S
V2†
V2
S
V2†
V2
V2G3vs
PBP
V2
V2
S
V2†
V2
S
V2†
V2
V2G3s
ABP
NA
V2
S
V2†
V2
S
V2†
V2
V2
G3s
PBP
V2
V2
S
V2†
V2
S
V2†
V2
V2
G3i
V2
GD
S
V2†
V2
S
V2†
GD
GD
G3r
O
V2
S
V2†
V2
S
V2†
V2
V2
19 

Page 25

FEATURES
The following table describes which features require additional hardware.
Feature
Abandoned Call Search
Abbreviated Dialing
ACCUNET® Service
Administered Connections
Answer Detection
Attendant Direct Exten-
sion Selection With Busy
Lamp Field
Hardware
TN747B CO trunk circuit pack.
Requires additional 748B tone detectors if the
special “wait” character is used frequently.
Modular processor data module (MPDM) AP
Demand Print+An AP, an MPDM, and a
printer.
Access endpoint circuit packs used: TN767...

Page 26

FEATURES
Feature
Audio Information
Exchange (AUDIX)
Automatic Call Distr-
bution (ACD)
Automatic Circuit
Assurance
Automatic Incoming
Call Display
Automatic Route
Selection
Hardware
TN742 or TN746B analog line circuit pack.
TN765 processor interface, MPDM for 2CA6
AUDIX. If PI is used, one port on a TN754
digital line, and an MTDM and MPDM.
One port on a TN742, TN746B, or TN769 ana-
log line circuit pack per auxiliary queue warn-
ing level lamp.
Each analog announcement requires
announcement equipment...

Page 27

FEATURES
Feature
Automatic Wakeup
BCMS
Call-by-Call Service
Selection
Hardware
If voice prompting is used, a TN725B voice
synthesizer circuit pack is required. Each cir-
cuit pack has four ports to provide voice
prompting. If voice synthesis announcements
are used, two ports must be reserved for
announcements.
A Cook Electronic Recorder/Announcer or an
Audichron® Company model HQD614B
Recorder/Announcer and power supply is
installed in the auxiliary cabinet. Either
recorder/announcer requires a TN763B....

Page 28

FEATURES
Feature
Call Detail Recording
(CDR)
Call Prompting
CallVisor® ASAI inter-
face
Hardware
Hardware requirements depend on the type of
output device used for SMDR.
A printer, personal computer or tape unit (Data
Terminal Equipment) — An MPDM to a port
on a TN754 digital line circuit pack or a 212A-
type modem to a port on a TN742 analog line
circuit pack. In the latter case, a standard
pooled modem is required for the data path.
Host computer — A private line terminated at
the System 85 with a...

Page 29

FEATURES
Feature
Centralized Attendant
Service (CAS) (Branch
or Main)
Code Calling Access
Data Call Setup
Hardware
A TN760D tie trunk circuit pack is used.
Either a TN722B DS1 tie trunk circuit pack or
a TN767B DS1 interface circuit pack can also
be used for the release link trunks of the CAS
network.
Loudspeaker paging equipment and one port
on a TN763B auxiliary trunk circuit pack per
zone. These hardware requirements can be
shared with the Loudspeaker Paging Access
feature. A 278A adapter is used if...

Page 30

FEATURES
Feature
Data Call Setup (continued)
Data-Only Off-Premises
Extensions
Distributed Communica-
tions System (DCS)
Features
Digital Multiplexed Interface
(DMI)
Direct Department Calling
and Uniform Call Distribu-
tion
Hardware
Modem pooling requires either a TN758
modem pool circuit pack or one digital port
with a TDM or MTDM, and one analog port
with analog modem for each conversion
resource.
Keyboard Dialing to off-premises (out-of-
building) data endpoints requires the use of a
TN748C tone...
Start reading ATT DEFINITY Communications System Generic 3 Pocket Reference Instructions Manual

Related Manuals for ATT DEFINITY Communications System Generic 3 Pocket Reference Instructions Manual

All ATT manuals