Asus Z93e Service Guide
Here you can view all the pages of manual Asus Z93e Service Guide. The Asus manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
Disassembly procedure
2 - 11 7. Remove 5 screws [M2 * 4(L)] on the top case then remove the hinge bracket.
8. Remove the speaker cable & touchpad cable on top case.
9. Turn over the NB and remove 13 screws [M2 * 6(L)] on the bottom case.
M2*6L](http://img.usermanuals.tech/thumb/8/59906/w300_asus-z93e-service-guide-10.png "Page 11
Disassembly procedure
2 - 11 7. Remove 5 screws [M2 * 4(L)] on the top case then remove the hinge bracket.
8. Remove the speaker cable & touchpad cable on top case.
9. Turn over the NB and remove 13 screws [M2 * 6(L)] on the bottom case.
M2*6L")
Disassembly procedure
2 - 11 7. Remove 5 screws [M2 * 4(L)] on the top case then remove the hinge bracket.
8. Remove the speaker cable & touchpad cable on top case.
9. Turn over the NB and remove 13 screws [M2 * 6(L)] on the bottom case.
M2*6L
Page 12
![Page 12
Disassembly procedure
2 - 12 10. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module
1. Remove 4 screws [M2 * 3(L)] and remove 1 yellow tape and disconnect the
Touch pad board FPC with tweezers then take away the Touch pad bracket
from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
TOUCH
PAD...](http://img.usermanuals.tech/thumb/8/59906/w300_asus-z93e-service-guide-11.png "Page 12
Disassembly procedure
2 - 12 10. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module
1. Remove 4 screws [M2 * 3(L)] and remove 1 yellow tape and disconnect the
Touch pad board FPC with tweezers then take away the Touch pad bracket
from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
TOUCH
PAD...")
Disassembly procedure
2 - 12 10. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module
1. Remove 4 screws [M2 * 3(L)] and remove 1 yellow tape and disconnect the
Touch pad board FPC with tweezers then take away the Touch pad bracket
from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
TOUCH
PAD...
Page 13
![Page 13
Disassembly procedure
2 - 13
Removing Speaker module
1. Remove 4 screws [M2 * 4(L)] on the both side.
2. Remove 5 tapes and take away the both speaker module.
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover....](http://img.usermanuals.tech/thumb/8/59906/w300_asus-z93e-service-guide-12.png "Page 13
Disassembly procedure
2 - 13
Removing Speaker module
1. Remove 4 screws [M2 * 4(L)] on the both side.
2. Remove 5 tapes and take away the both speaker module.
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover....")
Disassembly procedure
2 - 13
Removing Speaker module
1. Remove 4 screws [M2 * 4(L)] on the both side.
2. Remove 5 tapes and take away the both speaker module.
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover....
Page 14
![Page 14
Disassembly procedure
2 - 14 2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
3. Remove 6 screws [M2.5 * 6(L)] on LCD module.](http://img.usermanuals.tech/thumb/8/59906/w300_asus-z93e-service-guide-13.png "Page 14
Disassembly procedure
2 - 14 2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
3. Remove 6 screws [M2.5 * 6(L)] on LCD module.")
Disassembly procedure
2 - 14 2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
3. Remove 6 screws [M2.5 * 6(L)] on LCD module.
Page 15
Disassembly procedure
2 - 15 4. Lift a bit LCD module and disconnect the coaxial cable & LCD cable then
remove the inverter board.
5. Remove 1 yellow tape and take away the LCD module from the LCD back
cover.
6. Turn over the LCD panel and remove 1 yellow tape then disconnect the
coaxial FPC on the LCD panel.
Page 16
![Page 16
Disassembly procedure
2 - 16 7. Remove 4 screws [M2* 3(L)] and remove the right bracket from LCD panel.
And do the same process on the left bracket
8. Remove the LCD Hinges from LCD back cover on both sides.
9. Remove 3 tapes and take away the CCD module from LCD back cover.
10. Disconnect the CCD cable.](http://img.usermanuals.tech/thumb/8/59906/w300_asus-z93e-service-guide-15.png "Page 16
Disassembly procedure
2 - 16 7. Remove 4 screws [M2* 3(L)] and remove the right bracket from LCD panel.
And do the same process on the left bracket
8. Remove the LCD Hinges from LCD back cover on both sides.
9. Remove 3 tapes and take away the CCD module from LCD back cover.
10. Disconnect the CCD cable.")
Disassembly procedure
2 - 16 7. Remove 4 screws [M2* 3(L)] and remove the right bracket from LCD panel.
And do the same process on the left bracket
8. Remove the LCD Hinges from LCD back cover on both sides.
9. Remove 3 tapes and take away the CCD module from LCD back cover.
10. Disconnect the CCD cable.
Page 17
Disassembly procedure
2 - 17
Bottom Case Module
The illustrations below show how to disassemble and remove the bottom case module of the
notebook. The module contains the bottom case itself, speaker sets and Motherboard.
Removing Motherboard
1. Disconnect the speaker cable and remove 2 screws (M2*4L) then remove
the speaker module.
2. Remove 3 tapes and disconnect the CIR...
Page 18
![Page 18
Disassembly procedure
2 - 18
4. Remove 2 screws [M2 * 6(L)] on the M/B .
5. Remove the motherboard from the bottom case.
6. Remove 2 screws [M2 * 4(L)] and remove the FAN module.](http://img.usermanuals.tech/thumb/8/59906/w300_asus-z93e-service-guide-17.png "Page 18
Disassembly procedure
2 - 18
4. Remove 2 screws [M2 * 6(L)] on the M/B .
5. Remove the motherboard from the bottom case.
6. Remove 2 screws [M2 * 4(L)] and remove the FAN module.")
Disassembly procedure
2 - 18
4. Remove 2 screws [M2 * 6(L)] on the M/B .
5. Remove the motherboard from the bottom case.
6. Remove 2 screws [M2 * 4(L)] and remove the FAN module.
Page 19
![Page 19
Disassembly procedure
2 - 19
Motherboard Module
Removing Memory Module
1. Remove 2 tapes and turn over the MB remove 2 tapes and disconnect
the Bluetooth cable then take away the Bluetooth board.
2. Remove 2 screws [M2 * 4(W)] and disconnect the cable then take away
the modem module.
3. Disconnect the antenna and take away it from the motherboard.
MOTHERBOARD
MODULE...](http://img.usermanuals.tech/thumb/8/59906/w300_asus-z93e-service-guide-18.png "Page 19
Disassembly procedure
2 - 19
Motherboard Module
Removing Memory Module
1. Remove 2 tapes and turn over the MB remove 2 tapes and disconnect
the Bluetooth cable then take away the Bluetooth board.
2. Remove 2 screws [M2 * 4(W)] and disconnect the cable then take away
the modem module.
3. Disconnect the antenna and take away it from the motherboard.
MOTHERBOARD
MODULE...")
Disassembly procedure
2 - 19
Motherboard Module
Removing Memory Module
1. Remove 2 tapes and turn over the MB remove 2 tapes and disconnect
the Bluetooth cable then take away the Bluetooth board.
2. Remove 2 screws [M2 * 4(W)] and disconnect the cable then take away
the modem module.
3. Disconnect the antenna and take away it from the motherboard.
MOTHERBOARD
MODULE...