Asus Z93e Service Guide
Have a look at the manual Asus Z93e Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
Disassembly procedure
2 - 6
ODD Module
The illustration below shows how to remove the ODD module.
1. Remove the rubber and remove 1 screw [M2 * 6(L)] from the bottom case.
2. Put the screw driver here and push the ODD drive out from the NB.
ODD MODULE](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-5.png "Page 6
Disassembly procedure
2 - 6
ODD Module
The illustration below shows how to remove the ODD module.
1. Remove the rubber and remove 1 screw [M2 * 6(L)] from the bottom case.
2. Put the screw driver here and push the ODD drive out from the NB.
ODD MODULE")
![Page 9
Disassembly procedure
2 - 9
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module.
Removing Top Case Module
1. Remove the back - coaxial & inverter cable cover with a pair of tweezers.
2. Remove 1 screws [M2 * 4(L)] and disconnect the Coaxial cable & Inverter...](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-8.png "Page 9
Disassembly procedure
2 - 9
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module.
Removing Top Case Module
1. Remove the back - coaxial & inverter cable cover with a pair of tweezers.
2. Remove 1 screws [M2 * 4(L)] and disconnect the Coaxial cable & Inverter...")
![Page 10
Disassembly procedure
2 - 10 4. Remove 2 screws [M2 * 6(L)] on rear side.
5. Remove 4 screws [M2 * 6(L)] on the bottom case.
6. Separate LCD Module from the Top case module.](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-9.png "Page 10
Disassembly procedure
2 - 10 4. Remove 2 screws [M2 * 6(L)] on rear side.
5. Remove 4 screws [M2 * 6(L)] on the bottom case.
6. Separate LCD Module from the Top case module.")
![Page 11
Disassembly procedure
2 - 11 7. Remove 5 screws [M2 * 4(L)] on the top case then remove the hinge bracket.
8. Remove the speaker cable & touchpad cable on top case.
9. Turn over the NB and remove 13 screws [M2 * 6(L)] on the bottom case.
M2*6L](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-10.png "Page 11
Disassembly procedure
2 - 11 7. Remove 5 screws [M2 * 4(L)] on the top case then remove the hinge bracket.
8. Remove the speaker cable & touchpad cable on top case.
9. Turn over the NB and remove 13 screws [M2 * 6(L)] on the bottom case.
M2*6L")
![Page 12
Disassembly procedure
2 - 12 10. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module
1. Remove 4 screws [M2 * 3(L)] and remove 1 yellow tape and disconnect the
Touch pad board FPC with tweezers then take away the Touch pad bracket
from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
TOUCH
PAD...](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-11.png "Page 12
Disassembly procedure
2 - 12 10. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module
1. Remove 4 screws [M2 * 3(L)] and remove 1 yellow tape and disconnect the
Touch pad board FPC with tweezers then take away the Touch pad bracket
from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
TOUCH
PAD...")
![Page 13
Disassembly procedure
2 - 13
Removing Speaker module
1. Remove 4 screws [M2 * 4(L)] on the both side.
2. Remove 5 tapes and take away the both speaker module.
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover....](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-12.png "Page 13
Disassembly procedure
2 - 13
Removing Speaker module
1. Remove 4 screws [M2 * 4(L)] on the both side.
2. Remove 5 tapes and take away the both speaker module.
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover....")
![Page 14
Disassembly procedure
2 - 14 2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
3. Remove 6 screws [M2.5 * 6(L)] on LCD module.](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-13.png "Page 14
Disassembly procedure
2 - 14 2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
3. Remove 6 screws [M2.5 * 6(L)] on LCD module.")
![Page 16
Disassembly procedure
2 - 16 7. Remove 4 screws [M2* 3(L)] and remove the right bracket from LCD panel.
And do the same process on the left bracket
8. Remove the LCD Hinges from LCD back cover on both sides.
9. Remove 3 tapes and take away the CCD module from LCD back cover.
10. Disconnect the CCD cable.](http://img.usermanuals.tech/thumb/8/59906/w64_asus-z93e-service-guide-15.png "Page 16
Disassembly procedure
2 - 16 7. Remove 4 screws [M2* 3(L)] and remove the right bracket from LCD panel.
And do the same process on the left bracket
8. Remove the LCD Hinges from LCD back cover on both sides.
9. Remove 3 tapes and take away the CCD module from LCD back cover.
10. Disconnect the CCD cable.")
Disassembly procedure
2 - 11 7. Remove 5 screws [M2 * 4(L)] on the top case then remove the hinge bracket.
8. Remove the speaker cable & touchpad cable on top case.
9. Turn over the NB and remove 13 screws [M2 * 6(L)] on the bottom case.
M2*6L
Disassembly procedure
2 - 12 10. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module
1. Remove 4 screws [M2 * 3(L)] and remove 1 yellow tape and disconnect the
Touch pad board FPC with tweezers then take away the Touch pad bracket
from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
TOUCH
PAD
MODULE
REMOVE
Disassembly procedure
2 - 13
Removing Speaker module
1. Remove 4 screws [M2 * 4(L)] on the both side.
2. Remove 5 tapes and take away the both speaker module.
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover.
Please do not disassemble the individual parts.
Disassembling LCD Module
1. Remove 8 rubber pads. And remove 4 screw [M2.5 *6(L)] & 4 screw [M2
*6(L)] underneath them.
LCD
MODULE
LCD
DISASSEMBLY
SPEAKER
MODULE
REMOVE
Disassembly procedure
2 - 14 2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
3. Remove 6 screws [M2.5 * 6(L)] on LCD module.
Disassembly procedure
2 - 15 4. Lift a bit LCD module and disconnect the coaxial cable & LCD cable then
remove the inverter board.
5. Remove 1 yellow tape and take away the LCD module from the LCD back
cover.
6. Turn over the LCD panel and remove 1 yellow tape then disconnect the
coaxial FPC on the LCD panel.
Disassembly procedure
2 - 16 7. Remove 4 screws [M2* 3(L)] and remove the right bracket from LCD panel.
And do the same process on the left bracket
8. Remove the LCD Hinges from LCD back cover on both sides.
9. Remove 3 tapes and take away the CCD module from LCD back cover.
10. Disconnect the CCD cable.
Disassembly procedure
2 - 17
Bottom Case Module
The illustrations below show how to disassemble and remove the bottom case module of the
notebook. The module contains the bottom case itself, speaker sets and Motherboard.
Removing Motherboard
1. Disconnect the speaker cable and remove 2 screws (M2*4L) then remove
the speaker module.
2. Remove 3 tapes and disconnect the CIR connecter then take away the
CIR board.
3. Remove 1 yellow tape and disconnect the FAN cable.
BOTTOM
CASE
MODULE
MOTHERBOARD
REMOVAL
M2.5* 4L
Disassembly procedure
2 - 18
4. Remove 2 screws [M2 * 6(L)] on the M/B .
5. Remove the motherboard from the bottom case.
6. Remove 2 screws [M2 * 4(L)] and remove the FAN module.
Disassembly procedure
2 - 19
Motherboard Module
Removing Memory Module
1. Remove 2 tapes and turn over the MB remove 2 tapes and disconnect
the Bluetooth cable then take away the Bluetooth board.
2. Remove 2 screws [M2 * 4(W)] and disconnect the cable then take away
the modem module.
3. Disconnect the antenna and take away it from the motherboard.
MOTHERBOARD
MODULE