Asus Vw226t User Guide

							1-3ASUS VW226 Series LCD Monitor 
1.3.2 Back view
5. Power button/power indicator
• Press this button to turn the monitor on/off 
• The color definition of the power indicator is as the below table.
1. Audio-in port
. This port connects PC audio source by the bundled audio 
cable. (VW22 6T / VW22 6S only)
2. AC-IN port
. This port connects the power connector from the bundled power 
cord.
3. DVI port
. This 24-pin port is for PC (Personal Computer) DVI-D digital signal 
connection. (VW22 6T / VW22 6N only)
4. VGA port
. This 15-pin port is for PC VGA connection. 
Rear connectors 
Status Description
  Blue ON 
  Amber Standby mode
  OFF OFF
Stereo speaker
Rear connectorsStereo speaker
Screw holes for  VESA Wall Mount
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
1234
 
						

							1-4Chapter 1: Product introduction
 
						

							2-1ASUS VW226 Series LCD Monitor 
2.1 Assembling the monitor base
To assemble the monitor base: 
1. Have the front of the monitor face down on a table. 
2. Connect the base with the arm according to the below drawing. A click shows 
that the base has been connected successfully. 
We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent 
damage to the monitor. 
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the 
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle. 
v 
						

							2-2Chapter 2: Setup
2.3 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of the VW22 6 Series LCD monitor is specially designed 
for VESA wall mount.  
To detach the arm/base:  
1. Have the front of the monitor face down on a table. 
2. Remove the rubbers in the four screw holes (Figure 1).
3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide  out the arm/base to detach it from the monitor (Figure 2).
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.
Arm/base
Rubbers in the  screw holes 
Two screws 
Figure 1 Figure 2
 
						

							2-3ASUS VW226 Series LCD Monitor 
2.4 Connecting the cables
1. Connect the cables as the following instructions: • To connect the audio cable
: connect one end of the audio cable to the 
monitor’s Audio-in port, the other end to the computers audio-out port. 
• To connect the power cord
: connect one end of the power cord securely to 
the monitor’s AC input port, the other end to a power outlet.
• To connect the VGA/DVI cable
:
a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port. 
b. Connect the other end of the VGA/ DVI cable to your computer’s VGA/ DVI port.
c. Tighten the two screws to secure the VGA/DVI connector.
2.5 Turning on the monitor
Gently press the power button  . See page 1-2 for the location of the power 
button. The power indicator 
 lights up in blue to show that the monitor is ON.
When  both  the  VGA  and  the  DVI  cables  are  connected,  you  can  choose  either  
VGA mode or DVI mode from the Input Select item of the OSD functions.
2. Gather all the cables with the cable hook.
Cable hook
 
						

							2-4Chapter 2: Setup
 
						

							3-1ASUS VW226 Series LCD Monitor 
3.1 OSD (On-Screen Display) menu 
3.1.1 How to reconfigure
1. Press the MENU button to activate 
the OSD menu. 
                     
2. Press
  and   to  navigate  through  the  functions.  Highlight  and  activate 
the  desired  function  by  pressing  the  MENU  button.  If  the  func tion  selected 
has a sub-menu, press 
 and  again to navigate through the sub-menu 
functions.  Highlight  and  activate  the  desired  sub-menu  function  by  pressing  the MENU button.
3. Press
 and  to change the settings of the selected function.
4. To  exit  the  OSD  menu,  press  the 
  button.  Repeat  step  2  and  step  3  to 
adjust any other function.
3.1.2 OSD Function Introduction
1. Spendid
This function contains five 
sub-functions you can select  for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
• Scenery Mode
: best choice for scenery photo display with SPLENDID™ 
Video Enhancement.
• Standard Mode
: best choice for document editing with SPLENDID™   
Video Enhancement.
• Theater Mode
: best choice for movie with SPLENDID™ Video    
Enhancement.
• Game Mode
: best choice for game playing with SPLENDID™ Video
Enhancement.
• Night View Mode
: best choice for dark-scene game or movie with 
SPLENDID™ Video Enhancement.
• In the Standard Mode, the  Saturation
 and Sharpness
 functions are not 
user-configurable.
• In the other modes, the  sRGB
 function is not user-configurable.
   
						

							3-2Chapter 3: General Instruction  
• Phase adjusts the phase of the pixel clock signal. With a wrong phase 
adjustment, the screen shows  horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one  horizontal sweep. If the frequency is not correct, the screen shows vertical  stripes and the image is not proportional.
3. Color
Select the image color you like  from this function. 
• Color Temp.
: contains five color modes including Cool, Normal,    
Warm, sRGB, and User mode.      
• Skin Tone
: contains three color modes including Reddish, Natural,    
and Yellowish. 
In the User mode, colors of R (Red), G (Green), and B (Bluee) are user- configurable; the adjusting range is from 0-100.
2. Image
You can adjust brightness, contrast, 
sharpness, saturation,position (VGA  
only), ASCR, and focus (VGA only) from  this main function. 
• Brightness
: the adjusting range is from 0 to 100. 
 is a hotkey to    
activate this function.
• Contrast
: the adjusting range is from 0 to 100.
• ASCR
: turns on/off the ASCR(ASUS Smart Contrast Ratio) function.
• Sharpness
: the adjusting range is from 0 to 100.
• Saturation
: the adjusting range is from 0 to 100. 
• Position
: adjusts the horizontal postition (H-Position) and the vertical   
position (V-Position) of the image. The adjusting range is from 0 to 100.
• Focus
: reduces Horizonal-line noise and Vertical-line noise of the image 
by adjusting (Phase) and (Clock) separately. The adjusting range is from  0 to 100.
   
						

							3-3ASUS VW226 Series LCD Monitor 
4. Input Select 
In this function, you can select 
either VGA or DVI input source. (Only for some models)
5. System Setup 
Allow you to adjust the system.
• Volume
: the adjusting range is from 0 to 100. 
 is a hotkey to activate 
this function. 
• OSD Setup
:
    * Adjusts the horizontal postition (H-Position)/ the vertical position Adjusts the horizontal postition (H-Position)/ the vertical positionAdjusts the horizontal postition (H-Position)/ the vertical position    
     (V-Position) of the OSD from 0 to 100. 
    *   Adjusts the OSD timeout from 10 to 120.  
    *   Enables or disables the DDC/CI function. • Language
: there are ten languages for your selection, including English, 
German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese,  Simplified Chinese, and Japanese. 
• Aspect Control
: adjusts the aspect ratio to “Full” or “4:3”.
• Information
: shows the monitor information. 
• Reset
: “Yes” allows you to restore the default setting. 
   
						

							3-4Chapter 3: General Instruction  
 6SHFL¿FDWLRQVVXPPDU\9:61
Panel TypeTFT LCD
Panel size22 (16:10) wide screen
Max.  ResolutionWSXGA+ 1680 x 1050
Pixel pitch0.282mm
Brightness (Typ.)250cd/m2
Contrast Ratio (Typ.)1000:1
Contrast Ratio (Max.)50000:1 (with ASCR ON)
Viewing angle(H/V) CR>10† /160†
Display colors16.7M
Response time5ms
SPLENDID™ Video  EnhancementYes
SPLENDID™ selection5 video preset modes (by hotkey)
Auto adjustmentYes (by hotkey)
Color temperature selection5 color temperatures
Skin-Tone selection3 skin-tones
Digital inputDVI-D with HDCP
Analog inputD-Sub
ColorsBlack
Power LEDBlue (On)/ Amber (Standby)
VESA wall mount100 x 100mm
Tilt-†a†
Kensington lockYes
Voltage rating$&a9
Power consumptionPower On : <  35W, Standby: <  1W, Power Off: