Asus Vw226t User Guide

							VW226 Series 
LCD Monitor
User Guide
  
						

							ii
E3379 First Edition V1
January 2010
Copyright © 20 10ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,  
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any 
means, except documentation kept by the purchaser for backup purposes, without the express written 
permission of ASUSTeK COMPUTER INC. (“ASUS”). 
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless  
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. 
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS  
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS 
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, 
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), 
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY 
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. 
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR  
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, 
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO 
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS 
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. 
Products and corporate names appearing in this manual may or may not be registered trademarks or  
copyrights of their respective companies, and are used only for identification or explanation and to the 
owners’ benefit, without intent to infringe. 
 
						

							iii
Contents
Notices ......................................................................................................... iv 
Safety information ...................................................................................... vi
Care & Cleaning  ........................................................................................ vii
Chapter 1: Product introduction
1.1 Welcome! .................................................................................... 1-1
1.2 Package contents......................................................................... 1-1
1.3 Monitor introduction .................................................................... 1-21.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
Chapter 2: Setup
2.1 Assembling the monitor base ..................................................... 2-1
2.2 Adjusting the monitor .................................................................. 2-1
2.3 Detaching the arm/base (for VESA wall mount) ........................ 2-2
2.4 Connecting the cables ................................................................. 2-3
2.5 Turning on the monitor................................................................ 2-3
Chapter 3: General instruction 
3.1 OSD (On-Screen Display) menu  ................................................ 3-13.1.1 How to reconfigure .......................................................... 3-1
3.1.2 OSD Function Introduction.............................................. 3-1
3.2 5RGEK
ECVKQPUUWOOCT[ .............................................................. 3-4
3.3 Troubleshooting (FAQ) ................................................................ 3-8
3.4 Supported operating modes ....................................................... 3-9
 
						

							iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the  following two conditions: 
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with manufacturer’s 
instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the  receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is  required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance  
could void the user’s authority to operate this equipment.
As an Energy Star®Partner, our company has determined that this product meets 
the Energy Star®guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions 
from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
 
						

							v
TCO Development
Congratulations! The display you have just purchased carries the  
TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and 
environmental requirements in the world. This 
makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. 
Some of the features of the TCO’03 Display requirements:  Ergonomics
• Good visual ergonomics and image quality in order to improve the working  environment for the user and to reduce sight and strain problems. Important  
parameters are luminance, contrast, resolution, reflectance, colour rendition 
and image stability. 
Energy 
• Energy-saving mode after a certain time – beneficial both for the user and the   environment
• Electrical safety  Emissions 
• Electromagnetic fields  
• Noise emissions Ecology 
• The product must be prepared for recycling and the manufacturer must have a  certified environmental management system such as EMAS or ISO 14 001 
• Restrictions on 
- chlorinated and brominated flame retardants and polymers  - heavy metals such as cadmium, mercury and lead. 
The requirements included in this label have been developed by TCO  Development in cooperation with scientists, experts, users as well as 
manufacturers all over the world. Since the end of the 1980s TCO has been 
involved in influencing the development of IT equipment in a more user-friendly 
direction. Our labelling system started with displays in 1992 and is now requested 
by users and IT-manufacturers all over the world.  
For more information, please visit www.tcodevelopment.com 
  
						

							vi
Safety information
This symbol of the crossed out wheeled bin indicates that the product (electrical,  electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products.
• Before setting up the monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.   
• Never try to open the monitor cabinet. The dangerous high voltages inside the  monitor may result in serious physical injury. 
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified  service technician or your retailer.  
• Before using the product, make sure all cables are correctly connected and the  power cables are not damaged. If you detect any damage, contact your dealer  
immediately. 
• Slots and openings on the back or top of the cabinet are provided for  ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated  on the label. If you are not sure of the type of power supply to your home, 
consult your dealer or local power company. 
• Use the appropriate power plug which complies with your local power  standard.
• Do not overload power strips and extention cords. Overloading can result in  fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in  any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period  of time. This will protect the monitor from damage due to power surges. 
• Never push objects or spill liquid of any kind into the slots on the monitor  cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed   computers which have appropriate configured receptacles marked between 
100-240V AC.  
• If you encounter technical problems with the monitor, contact a qualified  service technician or your retailer.  
 
						

							vii
Care & Cleaning 
• Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the  
monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. 
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor  surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed 
with a cloth dampened with mild cleaner. 
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended  for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. 
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the  desktop pattern you use. 
• When the same image is displayed for hours, an afterimage of the previous  screen may remain after switching the image. The screen will recover slowly or 
you can turn off the Power Switch for hours. 
• When the screen becomes black or flashes, or cannot work anymore,  contact  your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to complete a task.  
CAUTION: Information to prevent damage to the components when trying  to complete a task.  
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
 
						

							viii
9JGTGVQ
PFOQTGKPHQTOCVKQP
Refer to the following sources for additional information and for product and  software updates. 
1. ASUS websitesThe ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com
2. Optional documentation Your product package may include optional documentation that may have 
been added by your dealer. These documents are not part of the standard package.
 
						

							1-1ASUS VW226 Series LCD Monitor 
1.1 Welcome!
Thank you for purchasing the ASUS® VW22 6 Series LCD monitor!
The  latest  widescreen  LCD  monitor  from  ASUS  provides  a  crisp er,  broader,  and 
brighter display, plus a host of features that enhance your viewing experience.  
With these features, you can enjoy the convenience and delightful visual  experience that the VW22 6 Series brings you!
1.2 Package contents
Check your VW22 6 Series LCD monitor package for the following items:
   LCD monitor
   Quick start guide
   1 x Power cord
   1 x VGA cable
   1 x DVI cable (VW22 6T / VW22 6N only)
   1 x Audio cable (VW22 6T / VW22 6S only)
I f  a n y  o f  t h e  a b o v e  i t e m s  i s  d a m a g e d  o r  m i s s i n g ,  c o n t a c t  y o u r  r e t a i l e r 
immediately.
       
						

							1-2Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front view
Base
1. Button:
• Use this hotkey to switch from five video preset modes (Game  Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) t View Mode, Scenery Mode, Standard Mode, Theater Mode) Mode, Scenery Mode, Standard Mode, Theater Mode) 
with SPLENDID™ Video Enhancement Technology.
• Exit the OSD menu or go back to the previous menu as the OSD menu is active.
• Automatically adjust the image to its optimized position, clock, and phase by pressing this button for 2-4 seconds (for VGA mode only).
2.
 Button:
• Press this button to decrease the value of the function selected or move left/up to the previous function. 
• This is also a hotkey for Volume adjustment or Contrast adjustment     depending on the monitor models.
3. MENU Button:  • Press this button to enter/select the icon (function) highlighted while the OSD is activated. 
4.
 Button:
• Press this button to increase the value of the function selected or move  right/down to the next function. 
• This is also a hotkey for Brightness adjustment. 
12345