Asus Vw195u User Guide

1-3ASUS VW195 Series LCD Monitor 

1.3.2	 Back	view
5.  Power button/power indicator          
 • Press this button to turn the monitor on/off
  • The color definition of the power indicator is as the below table.
1. Audio-in	port. This port connects PC audio source by the bundled audio 
cable. (VW195U / VW195T / VW195S only)
. AC-IN	port. This port connects the power connector from the bundled power 
cord.
3. DVI	port. This 4-pin port is for PC (Personal Computer) DVI-D digital signal...

1-4Chapter 1: Product introduction
 

-1ASUS VW195 Series LCD Monitor 
2.1	 Assembling	the	monitor	base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
. Connect the base with the arm according to the below drawing. A click shows 
that the base has been connected successfully. 
We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent damage to the monitor. 
2.2	 Adjusting	the	monitor
• For optimal viewing, we recommend that you look at the full face of the 
monitor,...

-Chapter : Setup

2.3	 Detaching	the	arm/base		
	 (for	VESA	wall	mount)
The detachable arm/base of the VW195 Series LCD monitor is specially designed 
for VESA wall mount. 
To detach the arm/base: 
1. Have the front of the monitor face down on a table.
. Remove the rubbers in the four screw holes (Figure 1).
3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide 
out the arm/base to detach it from the monitor (Figure ).
We recommend that you cover the...

-3ASUS VW195 Series LCD Monitor 

2.4	 Connecting	the	cables
1. Connect the cables as the following instructions:
• To	connect	the	audio	cable: connect one end of the audio cable to the  
monitor’s Audio-in port, the other end to the computer's audio-out port. 
• To	connect	the	power	cord: connect one end of the power cord securely to 
the monitor’s AC input port, the other end to a power outlet.
• To	connect	the	VGA/DVI	cable: 
 a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port....

-4Chapter : Setup
 

3-ASUS VW95 Series LCD Monitor 
3.1	 OSD	(On-Screen	Display)	menu	
3.1.1	 How	to	reconfigure
. Press the MENU button to activate  
the OSD menu. 
                    
           
2. Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press  and  again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU...

3-2Chapter 3: General Instruction  

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows  horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vert\
ical stripes and the image is not proportional.
3.	 Color		
  Select the image color you like 
 from this function. 
 
 • Color	Temp.: contains five color modes including Cool, Normal,    
  Warm,...

3-3ASUS VW95 Series LCD Monitor 

4.	 Input	Select	
 In this function, you can select  
either VGA or DVI input source. 
(Only for some models)
5.	 System	Setup	
 Allow you to adjust the system.
 • Volume: the adjusting range is from 0 to 00.  is a hotkey to activate  
  this function. 
 • OSD	Setup: 
    *���Adjusts the horizontal postition (H-Position)/ the vertical position   Adjusts the horizontal postition (H-Position)/ the vertical positionAdjusts the horizontal postition (H-Position)/...

3-4Chapter 3: General Instruction  

3.2	 Specifications	summary	(VW195U)
Panel	TypeTFT LCD
Panel	size9" (6:0) wide screen
Max.		ResolutionWXGA+ 440 x 900
Pixel	pitch0.285mm
Brightness	(Typ.)250cd/m2
Brightness	(Max.)300cd/m2
Contrast	Ratio	(Typ.)800:
Contrast	Ratio	(Max.)2000: (with ASCR ON)
Viewing	angle(H/V)	CR>10160˚/160˚
Display	colors6.7M
Response	time2ms (Gray to Gray)
SPLENDID™	Video	EnhancementYes
SPLENDID™	selection5 video preset modes (by hotkey)
Auto...