Asus V1s Service Guide
Here you can view all the pages of manual Asus V1s Service Guide. The Asus manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 11
Disassembly procedure
2 - 11
5. Remove 2 screws (M2*5) here.
6. Turn over the notebook and then remove 17 screws here.
7.
Separate the Top case from the bottom case.
M2*5
M2*4
M2.5*2
Page 12
Disassembly procedure
2 - 12
8. Separate the antenna from the top case.
9. Remove 8 screws (M2.5*6) here.
10. Separate the top case from the LCD module.
Page 13
Disassembly procedure
2 - 13
11. Remove 4 screws (M2*3) here and then take away the speaker.
12. Remove 4 screws (M2*2.5) here then take away the switch board.
13. Disconnect the Bluetooth cable and remove Bluetooth Mylar.
Then remove Bluetooth module from the top case.
Page 14
Disassembly procedure
2 - 14
14. Remove 3 screws (M2*3) here then take away the touchpad bracket.
15. Remove 6 screws (M2*3) here and then take away the touchpad board.
16. Use a pair of tweezers to disconnect touchpad cable and FFC cable..
Page 15
Disassembly procedure
2 - 15
17. Remove 2 screws (M2*3) here and then take away the touchpad module from the top case.
WLAN Module
The illustrations below show how to remove the WLAN module from the notebook.
Remove WLAN module
1. Remove 2 Antenna cables from Wireless LAN Module
2. Pull two latches and pop the module up...
Page 16
Disassembly procedure
2 - 16
3 G Card and Robson Card
The disassembly method of 3 G card and Robson card goes the same with that of the WLAN module.
Motherboard
The illustrations below show how to disassemble and remove the Motherboard.
Removing Motherboard
1. Disconnect the modem cable to motherboard.
2. Remove 2 screws here...
Page 17
Disassembly procedure
2 - 17
3. Remove 6 screws here.
4. Separate the Motherboard from the bottom case.
5. Disconnect the DC IN board cable from the motherboard and then take away the board.
M2*5
M2*8
Page 18
Disassembly procedure
2 - 18
6. Remove the 1 screw here the take away the TPM Board.
7. Disconnect the ODD FPC from the mother board.
Page 19
Disassembly procedure
2 - 19
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, Inverter board, LCD bezel, LCD back cover.
Disassembling LCD Module
1. Remove 6 rubber pads and 6 screws (M2*5)from LCD module.
2. Prying the inside edges of the LCD bezel, and then...
Page 20
Disassembly procedure
2 - 20
4. Disconnect the LCD cable. and inverter cable and then remove inverter board.
5. Remove 4screws (M2*5) and take away the LCD panel.