Asus V1s Service Guide
Have a look at the manual Asus V1s Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Disassembly procedure
2 - 11
5. Remove 2 screws (M2*5) here.
6. Turn over the notebook and then remove 17 screws here.
7.
Separate the Top case from the bottom case.
M2*5
M2*4
M2.5*2
Disassembly procedure
2 - 12
8. Separate the antenna from the top case.
9. Remove 8 screws (M2.5*6) here.
10. Separate the top case from the LCD module.
Disassembly procedure
2 - 13
11. Remove 4 screws (M2*3) here and then take away the speaker.
12. Remove 4 screws (M2*2.5) here then take away the switch board.
13. Disconnect the Bluetooth cable and remove Bluetooth Mylar.
Then remove Bluetooth module from the top case.
Disassembly procedure
2 - 14
14. Remove 3 screws (M2*3) here then take away the touchpad bracket.
15. Remove 6 screws (M2*3) here and then take away the touchpad board.
16. Use a pair of tweezers to disconnect touchpad cable and FFC cable..
Disassembly procedure
2 - 15
17. Remove 2 screws (M2*3) here and then take away the touchpad module from the top case.
WLAN Module
The illustrations below show how to remove the WLAN module from the notebook.
Remove WLAN module
1. Remove 2 Antenna cables from Wireless LAN Module
2. Pull two latches and pop the module up to a 45° angles, and then pulling out the module in that
angle.
WLAN
MODULE
WLAN
MODULE
REMOVAL
45o
Disassembly procedure
2 - 16
3 G Card and Robson Card
The disassembly method of 3 G card and Robson card goes the same with that of the WLAN module.
Motherboard
The illustrations below show how to disassemble and remove the Motherboard.
Removing Motherboard
1. Disconnect the modem cable to motherboard.
2. Remove 2 screws here and then take away the modem module.
MOTHERBOARD
MOTHERBOARD
REMOVAL
3 G CARD
&
ROBSON
CARD
Robson card 3 G card
Disassembly procedure
2 - 17
3. Remove 6 screws here.
4. Separate the Motherboard from the bottom case.
5. Disconnect the DC IN board cable from the motherboard and then take away the board.
M2*5
M2*8
Disassembly procedure
2 - 18
6. Remove the 1 screw here the take away the TPM Board.
7. Disconnect the ODD FPC from the mother board.
Disassembly procedure
2 - 19
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, Inverter board, LCD bezel, LCD back cover.
Disassembling LCD Module
1. Remove 6 rubber pads and 6 screws (M2*5)from LCD module.
2. Prying the inside edges of the LCD bezel, and then separates it from LCD back cover.
3. Remove 1 screw (M2*3) here.
LCD MODULE
LCD MODULE
DISASSEMBLY
Disassembly procedure
2 - 20
4. Disconnect the LCD cable. and inverter cable and then remove inverter board.
5. Remove 4screws (M2*5) and take away the LCD panel.