Asus Router WL-520g User Manual

WL-520g Wireless Router User Manual
20

5. Trouble Shooting
1. Cannot access to web browser for router configuration
1. Open a web browser and open "Internet Options" dialog box.2. Click on Delete Cookies and Delete Files.
2. Cannot Establish Connection via Wireless
  Out of Range: Put the router closer to the client.
  Try to change the channel setting.
  Authentication:  Can use a wire-connected computer to connect to router. 
  Check the wireless security setting,
  Or can do a hard reset on...

21
WL-520g Wireless Router User Manual

4.Internet is not accessible
• Check the lights on ADSL modem and Wireless Router
• Check the "WAN" led on the router is on or not. If the led isn't on, please change the cable to try again.
4.1.  When ADSL Modem "Link" light is on (not blinking), this means 
Internet Access is Possible.• Restart your computer.
• Reconfigurate the settings for ASUS Router and please refer to the Quick Setup Guide of the WL-520g.
• Check whether the WAN LED on...

WL-520g Wireless Router User Manual
22

6. Additional Information:
     Router and Client Wireless Connection Setup
1) Utility Installation for WL-520g
1. Click the first line Install ASUS Wireless Router Utilities to run the setup installation program.
2. Click Next to continue.
3. Click Next to confirm the designated location for installation.
4. Select a program folder and click Next.
5. After completing installation, Restart Computer dialog box will appear. Select Yes and press Finish to restart your...

23
WL-520g Wireless Router User Manual

LAN4LAN3 LAN2LAN1
WAN

Push EZSetup over 3 sec. and release.1
Security-enabled wireless LAN environment is built now.You can print your key and your other network settings for your reference.
Wireless LAN setup is complete. Click Next to make Internet connection settings. 
Click the EZSetup button in the utility.
2) EZSetup (Default)
Wireless LAN setup will complete in two easy steps.
2
3
Choose the time zone where you are located in.
4
1)  If the setup button is...

WL-520g Wireless Router User Manual
24

Depending on the connection type you selected, you may require additional information from your ISP. Some fields are optional and may be left blank.
Select the connection type (Cable or ADSL) you use.(Example: Cable modem or other connection type that gets IP automatically )
(ISP requirements depend on selection in the connection type.)
56
7
8
Depending on the service level you applied for with your ISP, your IP may be random (automatic) or fixed (enter manually)....

25
WL-520g Wireless Router User Manual

2
You can check for automatic or uncheck for manual wireless network naming.You must enter a name if unchecked.
Only  differences  between  the  default s e t u p  w i l l  b e  s h o w n  b e l o w.  S e l e c t t h e C u s t o m i z a t i o n  c h e c k  b o x  f o r advanced wireless LAN functions.
3) EZSetup (Customized) 
1
If you chose “Manually assign”, enter a WEP (Wired Equivalent Privacy) key following the guideline as shown.
(WEP or WPA depends on...

WL-520g Wireless Router User Manual
26

If you chose “Manually assign” and selected the WPA check box , enter a WPA (Wi-Fi Protected Access) key following the guideline as shown.
5
6Security-enabled wireless LAN environment is built now.You can print your key and your other network settings for your reference.Wireless LAN setup is complete. Click Next to make Internet connection settings. 
*For the following steps of Internet settings, please refer to P14~P15  Step 4~8. 

27
WL-520g Wireless Router User Manual

7. Appendix
FCC Warning Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and
(2)  this  device  must  accept  any  interference  received,  including  interference  that    may cause undesired operation.
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a class B digital device, pursuant to part 15 of the FCC...

WL-520g Wireless Router User Manual
28

Testing  for  electric  safety  according  to  EN  60950-1  has  been  conducted. These are considered relevant and sufficient.
Protection requirements for electromagnetic compatibility – Article 3.1b
Testing  for  electromagnetic  compatibility  according  to  EN  301  489-1  and EN  301  489-17  has  been  conducted.  These  are  considered  relevant  and sufficient.
Effective use of the radio spectrum – Article 3.2
Te s t i n g  f o r  r a d i o  t e s t  s u i t...

29
WL-520g Wireless Router User Manual