Asus Router WL-520g User Manual

							
WL-520g Wireless Router User Manual
20

5. Trouble Shooting
1. Cannot access to web browser for router configuration
1. Open a web browser and open "Internet Options" dialog box.2. Click on Delete Cookies and Delete Files.
2. Cannot Establish Connection via Wireless
  Out of Range: Put the router closer to the client.
  Try to change the channel setting.
  Authentication:  Can use a wire-connected computer to connect to router. 
  Check the wireless security setting,
  Or can do a hard reset on the router.
  Couldn't find the router:  Do the hard restore on the router and test again.
  Check the setting in the wireless adapter. 
  Such as SSID and encryption setting.
3.Cannot get access to the Internet via wireless LAN adapter
 • Move the router closer to the client.
• Check whether the wireless adapter is connected to the correct AP.
 • Check whether the wireless channel in use conforms to the channels  available in your country/ area.
 • Check encryption setting.
 • Check whether the ADSL cable is plugged to the correct port.
  • Retry by another Ethernet cable. 
						

							
21
WL-520g Wireless Router User Manual

4.Internet is not accessible
• Check the lights on ADSL modem and Wireless Router
• Check the "WAN" led on the router is on or not. If the led isn't on, please change the cable to try again.
4.1.  When ADSL Modem "Link" light is on (not blinking), this means 
Internet Access is Possible.• Restart your computer.
• Reconfigurate the settings for ASUS Router and please refer to the Quick Setup Guide of the WL-520g.
• Check whether the WAN LED on the router is on or not.  
• Check wireless encryption settings
• Check whether the computer can get the IP address or not. (via both wired network and wireless network)
• Check whether your Web browser is configurated to use the local LAN, and is not configured to use a proxy server.
  4.2. If the ADSL "LINK" light blinks continuously or stays off, 
Internet access is not possible - the Router is unable to 
establish a connection with the ADSL network. • Check that your cables are connected properly.
• Disconnect the power cable from the modem, wait a few minutes, then reconnect the cable.
• If the ADSL light continues to blink or stays off, contact your ADSL service provider.
5.Network name or encryption keys are unknown
• Can try to setup the wired connection for setup the wireless  encryption again.
• Can do the hard reset on the router.
6.How to reset to defaults
The following are factory default values. These values will be present when you first receive your ASUS Wireless Router, if you push the restore button on the back of the ASUS  Wireless  Router  over  5  seconds,  or  if  you  click  the  “Restore”  button  on  the  “Factory Default” page under “ Advanced Setup”.
  User Name:     admin       Subnet Mask:   255.255.255.0
  Password:     admin       DNS Server 1:   192.168.1.1
  Enable DHCP:   Yes (if plug in Wan cable) DNS Server 2:   (Blank)
  IP address:     192.168.1.1     SSID:    default
  Domain Name:   (Blank) 
						

							
WL-520g Wireless Router User Manual
22

6. Additional Information:
     Router and Client Wireless Connection Setup
1) Utility Installation for WL-520g
1. Click the first line Install ASUS Wireless Router Utilities to run the setup installation program.
2. Click Next to continue.
3. Click Next to confirm the designated location for installation.
4. Select a program folder and click Next.
5. After completing installation, Restart Computer dialog box will appear. Select Yes and press Finish to restart your computer.
6.Open the EZSetup Wizard. 
						

							
23
WL-520g Wireless Router User Manual

LAN4LAN3 LAN2LAN1
WAN

Push EZSetup over 3 sec. and release.1
Security-enabled wireless LAN environment is built now.You can print your key and your other network settings for your reference.
Wireless LAN setup is complete. Click Next to make Internet connection settings. 
Click the EZSetup button in the utility.
2) EZSetup (Default)
Wireless LAN setup will complete in two easy steps.
2
3
Choose the time zone where you are located in.
4
1)  If the setup button is pushed without running the EZsetup wizard utility, the  PWR  indicator  will  flash  and  Internet  connections  will  pause  for  a short period but will then return to normal operation without change.    
2)  You  must  have  ASUS  wireless  clients  such  as  WL-100gE,  WL-100g Deluxe and WL-167g to use WL-520g EZSetup.
N o t e :  U s e  E Z S e t u p  W i z a r d  w i t h one  wireless  client  at  a  time.  If  the wireless  client  computer  cannot discover  the  wireless  router  while in  EZSetup  mode,  please  shorten the distance between the client and the router. 
						

							
WL-520g Wireless Router User Manual
24

Depending on the connection type you selected, you may require additional information from your ISP. Some fields are optional and may be left blank.
Select the connection type (Cable or ADSL) you use.(Example: Cable modem or other connection type that gets IP automatically )
(ISP requirements depend on selection in the connection type.)
56
7
8
Depending on the service level you applied for with your ISP, your IP may be random (automatic) or fixed (enter manually).
Example 2: ADSL or other connection type that uses static IP address.Example 1: Cable Modem or other connection type that gets IP address automatically 
						

							
25
WL-520g Wireless Router User Manual

2
You can check for automatic or uncheck for manual wireless network naming.You must enter a name if unchecked.
Only  differences  between  the  default s e t u p  w i l l  b e  s h o w n  b e l o w.  S e l e c t t h e C u s t o m i z a t i o n  c h e c k  b o x  f o r advanced wireless LAN functions.
3) EZSetup (Customized) 
1
If you chose “Manually assign”, enter a WEP (Wired Equivalent Privacy) key following the guideline as shown.
(WEP or WPA depends on security selection in the previous screen.)
4
3You can choose to use automatic or manual security key. 
If all your clients are using ASUS WPA capable wireless network adapters, you can select WPA for extra strength security. (This selection will only be available for ASUS WPA adapters.) 
						

							
WL-520g Wireless Router User Manual
26

If you chose “Manually assign” and selected the WPA check box , enter a WPA (Wi-Fi Protected Access) key following the guideline as shown.
5
6Security-enabled wireless LAN environment is built now.You can print your key and your other network settings for your reference.Wireless LAN setup is complete. Click Next to make Internet connection settings. 
*For the following steps of Internet settings, please refer to P14~P15  Step 4~8. 
						

							
27
WL-520g Wireless Router User Manual

7. Appendix
FCC Warning Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and
(2)  this  device  must  accept  any  interference  received,  including  interference  that    may cause undesired operation.
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed  to  provide  reasonable  protection  against  harmful  interference  in  a residential installation.
This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: 
Any changes or modifications not expressly approved by the party responsible for compliance could void the userʼs authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter
Safety Information
To maintain compliance with FCCʼs RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna.
Declaration of Conformity for R&TTE directive 1999/5/EC
Essential requirements – Article 3
Protection requirements for health and safety – Article 3.1a 
						

							
WL-520g Wireless Router User Manual
28

Testing  for  electric  safety  according  to  EN  60950-1  has  been  conducted. These are considered relevant and sufficient.
Protection requirements for electromagnetic compatibility – Article 3.1b
Testing  for  electromagnetic  compatibility  according  to  EN  301  489-1  and EN  301  489-17  has  been  conducted.  These  are  considered  relevant  and sufficient.
Effective use of the radio spectrum – Article 3.2
Te s t i n g  f o r  r a d i o  t e s t  s u i t e s  a c c o r d i n g  t o  E N  3 0 0  3 2 8 -  2  h a s  b e e n conducted. These are considered relevant and sufficient.
CE Mark Warning
This  is  a  Class  B  product,  in  a  domestic  environment,  this  product  may cause  radio  interference,  in  which  case  the  user  may  be  required  to  take adequate measures. 
						

							
29
WL-520g Wireless Router User Manual