Asus Router RT_N13 User Manual Czech Version

							
11
Chapter : Setting up the hardware                      RT-N1

.  After establishing a wireless connection, launch a web browser. 
Notes:     •  You may also manually key in the router's default IP address (192.168.1.1) to launch the      router's web interface.   •  For more details on configuring your wireless router using the web GUI, refer to Chapter 4:      Configuring via the web GUI. 
						

							
1
RT-N13                       Chapter 3: Configuring the clients

3
Configuring the 
network clients
Accessing the wireless router
Setting an IP address for wired or wireless client
To access the ASUS Wireless Router, you must have the correct TCP/IP settings on your wired or wireless clients. Ensure that the clients’ IP addresses are within the same subnet as the ASUS Wireless Router.
By default, the ASUS Wireless Router integrates the DHCP server functions, which automatically assigns IP addresses to the clients in your network.
But in some instances, you may want to manually assign static IP addresses on some of the clients or computers in your network rather than automatically getting IP addresses from your wireless router.
Follow the instructions below that correspond to the operating system in\
stalled on your client or computer.
Note: If you want to manually assign an IP address to your client, we recommend that you use the following settings:   • IP address: 19.168.1.xxx (xxx can be any number between  and 54. Ensure that the IP      address is not used by another device)   • Subnet Mask: 55.55.55.0 (same as the ASUS Wireless Router)   • Gateway: 19.168.1.1 (IP address of the ASUS Wireless Router)   • DNS: 19.168.1.1 (ASUS Wireless Router) or assign a known DNS server in your n\
etwork 
						

							
1
Chapter 3: Configuring the clients                       RT-N13

Windows® 9x/ME
1. Click Start > Control Panel > Network to display the Network setup window.
. Select TCP/IP then click Properties.
. If you want your computer to automatically obtain an IP address, click Obtain an IP address automatically then click OK. Otherwise, click Specify an IP address, then key in the IP address and Subnet Mask. 
						

							
14
RT-N13                       Chapter 3: Configuring the clients

4. Select Gateway tab, and key in New gateway then click Add.
5. Select the DNS configuration tab and click Enable DNS. Key in Host, Domain, and DNS Server Search Order, then click Add.
6. Click OK. 
						

							
15
Chapter 3: Configuring the clients                       RT-N13

Windows® NT4.0
1. Go to Control Panel > Network to display the Network setup window 
then select the Protocols tab.
. Select TCP/IP Protocol from the Network Protocols list then click Properties.
. From the IP Address tab of the Microsoft TCP/IP Properties windows, you can:
 •  Select the type of network   adapter installed in your   system.
 •  Set the router to assign IP   address automatically.
 •  Manually set up the IP address,    subnet mask, and default   gateway. 
						

							
16
RT-N13                       Chapter 3: Configuring the clients

4. Select the DNS tab then click Add under the DNS Service Search Order and key in DNS.
Windows® 2000
1. Click Start > Control Panel > Network and Dial-up Connection. Right-click Local Area Connection then click Properties. 
						

							
17
Chapter 3: Configuring the clients                       RT-N13

. Select Internet Protocol (TCP/IP), then click Properties.
. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default gateway.
4. Select Obtain an IP address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS server address: and key in the Preferred and Alternate DNS server.
5. Click OK when done.
Windows® XP
1. Click Start > Control Panel > Network Connection. Right-click Local Area Connection then select Properties. 
						

							
18RT-N13                       Chapter 3: Configuring the clients
. Select Internet Protocol (TCP/IP), then click Properties.
. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default gateway.
4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS server addresses: and key in the Preferred and Alternate DNS server.
5. Click OK when done. 
						

							
19Chapter 4: Configuring via the web GUI                     RT-N13
4
Configuring via the 
web GUI
Configuring via the web GUI
The router’s web graphics user interface (web GUI) allows you to configure these features: Network Map, EZQoS Bandwidth Management, and other Advanced Setting.
To configure via the web GUI:
1. After setting up a wired or wireless connection, launch a web browser. The login page is automatically launched.
Note: You may also manually key in the router’s default IP address (192.168.1.1) to launch the router’s web interface.
. On the login page, key in the default user name (admin) and password (admin). 
						

							
0
RT-N13                     Chapter 4: Configuring via the web GUI

3. From the main page, click the navigation menu or links to configure th e various features of the ASUS Wireless Router.
Using the Network Map
Network Map allows you to view the status and configure the connection settings of the Internet, system, and clients in your network. It enables you to \
quickly set up your Wide Area Network (WAN) using the Quick Internet Setup (QIS) feature, or to quickly set up your Local Area Network (LAN) using the EZ Setup utility.
Note: For more details on WPS, refer to the section WPS in Chapter 5 of this user manual.
To view the status or configure the settings, click on any of these icons displayed on the main page:
IconDescription
Internet status
Click this icon to display information on the Internet connection status, WAN IP address,  DNS, connection type, and gateway address.  From the Internet status screen, use the Quick Internet Setup (QIS) feature to quickly set up your WAN.
Note: For more details on the QIS feature, refer to the section Setting up WAN using the Quick Internet Setup (QIS) on the next page.
System status
Click this icon to display information on the SSID, authentication method, WEP encryption, LAN IP, PIN code, MAC address, or turn the wireless radio on/off. Launch the WPS function from the System status screen.