Asus Ms228h User Guide

1.5.2	 Rear	of	the	LED	monitor	
Rear	connectors
	1-5
	
StatusDescription
  
White
ON
   White  (Blinking )Standby mode
  OFF OFF
DC-IN	port
HDMI Audio - out port VGA	port 1
2
3
4
HDMI-IN	port
DC-INVGAHDMI
6 . 
 Power button  / Power indicator           
  • Press this button to turn the monitor on/of f.
ASUS LED Monitor MS228H Series
 

2.1  Adjusting the monitor
• 
•
 
You can adjust the monitor’s angle from  10º to 20º.
 
2-1Chapter 2: Setup
Hold both right and left front frames to prevent the monitor 
from falling when you change its angle. 
 

3-

3.1  OSD  (On-Screen   Display)   menu  
3.1.1	 How	 to 	 reconfigure
.   Press the MENU button to activate  
the OSD menu. 

2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press      and        again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3.  Press  and  to change the settings...

3-2Chapter 3: General Instruction  

2.      Image  
  Y
ou can adjust brightness, contrast, ASCR, Trace Free, sharpness, saturation, 

         
position (VGA  only), and focus (VGA only) from  this main function. 

P1
 
activate this function.
•
•
Sharpness: the adjusting range is from 0 to  100.
•Saturation: the adjusting range is from 0 to  100. 
•Position: adjusts the horizontal position (H-Position) and the vertical 
   
position ( V-Position) of the image.  The adjusting range is from 0 to  100....

3-3
5.	 System	Setup	
 Allow you to adjust the system.
 
• OSD Setup: adjust the horizontal position (H-Position) and    
 the vertical position (V-Position) of the OSD. The adjusting range is    
 from 0 to 00. In the OSD Timeout selection, you can adjust the    
 OSD timeout from 0 to 20 seconds. 
• Language: there are eleven languages for your selection,      
 including English, French, German, Spanish, Italian, Dutch, Russian,   
 Traditional Chinese, Simplified Chinese, Japanese and...

ModelMS228H
 
Panel S iz e  
True R esolution  1920x1080
Brightness (Max.)   250cd/m2
I
nt ris inc  Cont rast Rat io 
1000:1 
View ing A ngle ( CR 10)  
Col or Satura tion (NTSC )  72%
Display Colors  16.7 M 
Respons e Time  
HDMI Input 
DVI Input 
VGA (D-Sub) Input  Yes
HDMI Audio-out 
Yes
Power ON 
Tilt 
Phys. Dimension  (WxHxD)   519.5x377.6x155.9 mm
Box Dimension (WxHxD)  587x140x430 mm
Net Weight (Esti.)     
Gross Weight (Esti.)      
Voltage Rating 
100~240V  
*Specifications are subject to change...

3.3  Troubleshooting (FAQ)

ProblemPossible	Solution

Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED is blinking and there is no 
screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly      connected the monitor and the computer . •  Inspect the signal cable and make sure      none of the pins...

3-6Chapter 3: General Instruction  
3.4 MS228H    Supported Timing List
VESA  Modes,  Factory  Preset Timings  

640x480 60Hz 31.489 kHz
640 x480 67Hz 35kHz
640 x480 72Hz 37.881 kHz
640 x480 75Hz 37.5 kHz
640 x350 70Hz 31.469 kHz
720 x400 70Hz 31.469 kHz
800 x600 56Hz 35.156 kHz
800 x600 60Hz 37.879 kHz
800 x600 72Hz 48.077 kHz
800 x600 75Hz 46.875 kHz
832 x624 75Hz 49.725 kHz
848 x480 60Hz 31.02 kHz
1024 x768 60Hz 48.363 kHz
1024 x768 70Hz 56.476 kHz
1024 x768 75Hz 60.023 kHz
1024 x768 75Hz 67.023 kHz...

*	Modes	not	listed	in	the	above	tables	may	not	be	supported.	For	optimal	resolution,	we	recommend	
that	you	choose	a	mode	listed	in	the	above	tables
3-7
IBM Modes  
Mode  Reso lu ti on   H(KHz)   V(Hz)  Pix e l( MHz ) 
DOS   640x35 0  31.46 9  70  25.17 5 
720 x40 0  31.46 9  70  28.32 2 
M AC Mode s 
Mode   Reso lu ti on   H(KHz)   V(Hz)  Pix e l( MHz ) 
VGA   640x48 0  35  67  30.2 4 
SVGA   832x62 4  49.72 5  75  57.28 32 
ASUS LED Monitor MS228H Series