Asus Ms228h User Guide

							
1.5.2	 Rear	of	the	LED	monitor	
Rear	connectors
	1-5
	
StatusDescription
  
White
ON
   White  (Blinking )Standby mode
  OFF OFF
DC-IN	port
HDMI Audio - out port VGA	port 1
2
3
4
HDMI-IN	port
DC-INVGAHDMI
6 . 
 Power button  / Power indicator           
  • Press this button to turn the monitor on/of f.
ASUS LED Monitor MS228H Series
 
						

							
2.1  Adjusting the monitor
• 
•
 
You can adjust the monitor’s angle from  10º to 20º.
 
2-1Chapter 2: Setup
Hold both right and left front frames to prevent the monitor 
from falling when you change its angle. 
 
						

							
3-

3.1  OSD  (On-Screen   Display)   menu  
3.1.1	 How	 to 	 reconfigure
.   Press the MENU button to activate  
the OSD menu. 

2.  Press  and  to navigate through the functions. Highlight and activate 
the desired function by pressing the MENU button. If the function select\
ed 
has a sub-menu, press      and        again to navigate through the sub-menu 
functions. Highlight and activate the desired sub-menu function by press\
ing 
the MENU button.  
3.  Press  and  to change the settings of the selected function.
4.  To exit the OSD menu, press the  button. Repeat step 2 and step 3 to 
adjust any other function.   
3.1.2	 OSD 	 Function 	 Introduction
1.	 Splendid
 This function contains five  
sub-functions you can select  
for your preference. Each mode has the 
Reset selection, allowing you to maintain 
your setting or return to the preset mode.
 •  Scenery 	 Mode: best choice for scenery photo display with SPLENDID™   
 Video Intelligence Technology.
 •    Standard 	 Mode: best choice for document editing with SPLENDID™    
 Video Intelligence Technology.
 •    Theater 	 Mode: best choice for movie with SPLENDID™ Video     
 Intelligence Technology.
 •    Game 	 Mode: best choice for game playing with SPLENDID™ Video 
 Intelligence Technology.
 •    Night	 View 	 Mode: best choice for dark-scene game or movie with  
 SPLENDID™ Video Intelligence Technology. 
•  In the Standard Mode, the Saturation and ASCR functions are not user-configurable.
•  In the other modes, the sRGB function is not user-configurable.
Night View Mode
Night View Mode
ASUS LED Monitor MS228H Series
 
						

							
3-2Chapter 3: General Instruction  

2.      Image  
  Y
ou can adjust brightness, contrast, ASCR, Trace Free, sharpness, saturation, 

         
position (VGA  only), and focus (VGA only) from  this main function. 

P1
 
activate this function.
•
•
Sharpness: the adjusting range is from 0 to  100.
•Saturation: the adjusting range is from 0 to  100. 
•Position: adjusts the horizontal position (H-Position) and the vertical 
   
position ( V-Position) of the image.  The adjusting range is from 0 to  100.    
•Focus: reduces Horizonal-line noise and V ertical-line noise of the image  by adjusting (Phase) and (Clock) separatel y.  The adjusting range is from  
0 to  100.      
•  Phase adjusts the phase of the pixel clock signal. With a wrong phase 
adjustment, the screen shows  horizontal disturbances.
•   Clock (pixel frequency) controls the number of pixels scanned by one 
horizontal sweep. If the frequency is not correct, the screen shows vert\
ical 
stripes and the image is not proportional.
   
•Brightness: the adjusting range is from 0 to  100.    is a hotkey to    
 
3.  Color
  
  Select the image color you like 
  from this function.  P2
Contrast: the adjusting range is from 0 to 100.
ratio function.
ASCR: Select YES or NO to enable or disable dynamic contrast 
•
ASCRT
race FreeSharpnessSaturation 54
54
FocusPosition
•Trace Free:
 
						

							
3-3
5.	 System	Setup	
 Allow you to adjust the system.
 
• OSD Setup: adjust the horizontal position (H-Position) and    
 the vertical position (V-Position) of the OSD. The adjusting range is    
 from 0 to 00. In the OSD Timeout selection, you can adjust the    
 OSD timeout from 0 to 20 seconds. 
• Language: there are eleven languages for your selection,      
 including English, French, German, Spanish, Italian, Dutch, Russian,   
 Traditional Chinese, Simplified Chinese, Japanese and Korean.  
• Aspect Control: adjusts the aspect ratio among Full, 4:3, and
 OverScan(For  HDMI mode only). 
 • Information: shows the monitor information. 
 • All Reset: “Yes” allows you to revert to the preset mode. 
4.	 Input	Select	
 
• Color  Temp.: contains five color modes including Cool, Normal,    
 Warm, sRGB, and User mode.      
 •  Skin Tone: contains three color modes including Reddish, Nat ural,   
 and Yellowish. 
In the User mode, colors of R (Red), G (Green), and B (Bluee) are \
user-configurable; the adjusting range is from 0-00.
In this function, you c ould only  select   VGA  and HDMIinput source. 
HDMI
Aspect Control
InformationAll Reset
ASUS LED Monitor MS228H Series
 
						

							
ModelMS228H
 
Panel S iz e  
True R esolution  1920x1080
Brightness (Max.)   250cd/m2
I
nt ris inc  Cont rast Rat io 
1000:1 
View ing A ngle ( CR 10)  
Col or Satura tion (NTSC )  72%
Display Colors  16.7 M 
Respons e Time  
HDMI Input 
DVI Input 
VGA (D-Sub) Input  Yes
HDMI Audio-out 
Yes
Power ON 
Tilt 
Phys. Dimension  (WxHxD)   519.5x377.6x155.9 mm
Box Dimension (WxHxD)  587x140x430 mm
Net Weight (Esti.)     
Gross Weight (Esti.)      
Voltage Rating 
100~240V  
*Specifications are subject to change without notice.
3-
4

						

							
3.3  Troubleshooting (FAQ)

ProblemPossible	Solution

Power  LED is not ON•  Press the  button to check if the monitor      is in the ON mode. •  Check if the power cord is properly     connected to the monitor and the power    outlet. 
The power LED is blinking and there is no 
screen image •  Check if the monitor and the computer are    in the ON mode. •  Make sure the signal cable is properly      connected the monitor and the computer . •  Inspect the signal cable and make sure      none of the pins are bent. •  Connect the computer with another     available monitor to check if the computer     is properly working.
Screen image is too light or dark•  Adjust the Contrast and Brightness settings    via OSD.
Screen image is not centered or sized properly•  Press the  button for 2-4  seconds to     automatically adjust the image (For VGA 
mode only).   
•  Adjust the H-Position or V -Position settings
 
   via OSD(For VGA mode only).
Screen image bounces or a wave pattern is present in the image•  Make sure the signal cable is properly     connected to the monitor and the computer . •  Move electrical devices that may cause       electrical interference.
Screen image has color defects (white does not look white)•  Inspect the signal cable and make sure that     none of the pins are bent.  •  Perform All Reset  via OSD. •   Adjust the R/G/B color settings or select the     Color  Temperature via OSD.
Screen image is blurry or fuzzy 
 
 
 
A
   
3-5
•  Press the  button for 2-4  seconds to  
   automatically adjust the image (For VGA 
mode only).   
•   Adjust the H-Position or V -Position settings
   via OSD (For VGA mode only).A
ASUS LED Monitor MS228H Series
 
						

							
3-6Chapter 3: General Instruction  
3.4 MS228H    Supported Timing List
VESA  Modes,  Factory  Preset Timings  

640x480 60Hz 31.489 kHz
640 x480 67Hz 35kHz
640 x480 72Hz 37.881 kHz
640 x480 75Hz 37.5 kHz
640 x350 70Hz 31.469 kHz
720 x400 70Hz 31.469 kHz
800 x600 56Hz 35.156 kHz
800 x600 60Hz 37.879 kHz
800 x600 72Hz 48.077 kHz
800 x600 75Hz 46.875 kHz
832 x624 75Hz 49.725 kHz
848 x480 60Hz 31.02 kHz
1024 x768 60Hz 48.363 kHz
1024 x768 70Hz 56.476 kHz
1024 x768 75Hz 60.023 kHz
1024 x768 75Hz 67.023 kHz
1152 x864 75Hz 67.5 kHz
1280 x720 60Hz 44.444 /44 .772 kHz
1280 x720 75Hz 56.456 kHz
1280 x768 60Hz 47.8 kHz
1280 x800 60Hz 49.306 /49 .702 kHz
1280 x800 75Hz 62.795 kHz
1280 x960 60Hz 60kHz
1280 x1024 60Hz 63.981 kHz
1280 x1024 75Hz 79.976 kHz
1360 x768 60Hz 47.7 kHz
1366 x768 60Hz 47.7 kHz
1440 x900 60Hz 55.469 /55 .935 kHz
1440 x900 75Hz 70.635 kHz
1600 x900 60Hz 60kHz
1680 x1050 60Hz 64.674 /65 .29 kHz
1920 x1080
60Hz

66.587 /67 .5 kHz
640 X480 P (
HDMI)

59.94 /60Hz 31.469 /31 .5 kHz
720 x480 P (
HDMI)

59.95 /60Hz 31.469 /31 .5 kHz
720 x576 P (
HDMI)

50Hz31.25 kHz
1280 x720 P (
HD MI)

50Hz37.5 kHz
1280 x720 P (
HD MI)

59.94 /60Hz 44.955 /45 kHz
1920 x1080 i   (
HDMI)

50Hz28.125 kHz
1920 x1080 i   (
HDMI)

59.94 /60Hz 33.716 /33 .75
1920 x1080 P (
HDMI) 50Hz

56.25 kHz
1920 x1080 P (
HDMI ) 59.94/60Hz

67.433 /67 .5 kHzRe so lu tio n  R
efresh Rate
 Horizontal Frequency 
*	Modes	not	listed	in	the	above	tables	may	not	be	supported.	For	optimal	resolution,	we	recommend	that	you	choose	a	mode	listed	in	the	above	tables
 
						

							
*	Modes	not	listed	in	the	above	tables	may	not	be	supported.	For	optimal	resolution,	we	recommend	
that	you	choose	a	mode	listed	in	the	above	tables
3-7
IBM Modes  
Mode  Reso lu ti on   H(KHz)   V(Hz)  Pix e l( MHz ) 
DOS   640x35 0  31.46 9  70  25.17 5 
720 x40 0  31.46 9  70  28.32 2 
M AC Mode s 
Mode   Reso lu ti on   H(KHz)   V(Hz)  Pix e l( MHz ) 
VGA   640x48 0  35  67  30.2 4 
SVGA   832x62 4  49.72 5  75  57.28 32 
ASUS LED Monitor MS228H Series