Asus G73 Service Guide
Have a look at the manual Asus G73 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Disassembly Procedure
V1.0 2 - 11
Disassemble the Top Case Module
5. Tear off the mylars on the touchpad. Remove 2 screws (M2*5) on the touchpad bracket.
Disconnect the touchpad FPC and remove the touchpad module.
6. Remove 2 screws (M2.5*5) on the touchpad bracket and separate the touchpad board and the
touchpad bracket.
M2*3
Disassembly Procedure
V1.0 2 - 12
7. Remove 3 screws (M2*3) on the power switch board. Remove the power switch board from the
top case.
8. Remove 1 screw (M2.5*5) on the speaker and take away the speaker.
BACK
M2.5*5
M2*3
M2.5*5
Disassembly Procedure
V1.0 2 - 13
LCD Module
The illustrations below show how to remove and disassemble the LCD Module.
Remove the LCD Module
1. Disconnect the following the cable from the motherboard: LCD light bar cable, LVDS cable,
CMOS MIC cable. Pull out the WLAN antennas from the hole in the motherboard. Pry the latch
fixing the cables and release the cables. Separate the LCD module from the whole system.
L C D
CMOS MIC cable
LVDS cable
LCD Light Bar cable Pull out the WLAN
antennas from the hole here.
Disassembly Procedure
V1.0 2 - 14
Disassemble the LCD Module
2. Remove 2 screws (M2.5*6) on the LCD bezel. Pry the edges of LCD bezel and remove the front
bezel.
M2.5*6
Disassembly Procedure
V1.0 2 - 15
3. Remove the LED board.
4. Remove 4 screws (M2.5*6) on the lower bracket. Then remove the lower bracket.
5. Remove 3 screws (M2.5*4, M2.5*5) on the each LCD hinges. Then remove the both hinges.
M2.5*6
M2.5*5
M2.5*5
M2.5*4 M2.5*4
Disassembly Procedure
V1.0 2 - 16
5. Remove 6 screws (M2.5*4, M2.5*5) fixing the LCD panel and take away the LCD panel.
M2.5*5
M2.5*4
Disassembly Procedure
V1.0 2 - 17
6. Remove 4 screws (M2.5*4) on the LCD up bracket and remove the up bracket.
7. Disconnect the camera and its cable. Then remove the CMOS MIC cable from its cover.
M2.5*4
Disassembly Procedure
V1.0 2 - 18
8. Disconnect the LVDS cable from the LCD panel. Remove 8 screws (M2*3) on the LCD
brackets and separate the LCD brackets.
BACK
M2*3 M2*3
Disassembly Procedure
V1.0 2 - 19
Motherboard Module
The illustrations below show how to disassemble and remove the Motherboard Module.
Remove the Motherboard Module
1. Remove 3 screws (M2*6) on each fan. Disconnect the fan cables. Remove 2 fans.
2. Remove 3 screws (M2.5*5) on the motherboard. Then disconnect the following cables:
LAN board cable, Bluetooth cable, audio board cable and the SATA FFC. Remove the motherboard
from the bottom case.
M O T H E R B O A R D
M2*6
M2*6
Disassembly Procedure
V1.0 2 - 20
M2.5*5
LAN board cable
Bluetooth cable
Audio board cable SATA FFC