Asus G73 Service Guide
Here you can view all the pages of manual Asus G73 Service Guide. The Asus manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 1
Disassembly Procedure
V1.0 2 - 1
Disassembly Procedure
Please follow the information provided in this section to perform the complete
disassembly procedure of the notebook. Be sure to use proper tools described
before.
SUS G73 Series Notebook consists of various modules. This chapter...
Page 2
Disassembly Procedure
V1.0 2 - 2
Battery Module
The illustration below shows how to remove the battery module.
Remove Battery Module
Open latch 1 and hold the latch 2 when take the battery away....
Page 3
Disassembly Procedure
V1.0 2 - 3
2. Pull two latches here to pop the memories module up at 45 angles, and then pull out the module
at that angle....
Page 4
Disassembly Procedure
V1.0 2 - 4
2. Remove 4 screws (M3*4) to separate HDD from HDD housing
BACK
M3*3
M3*3
Page 5
Disassembly Procedure
V1.0 2 - 5
Wireless LAN Module
The illustration below shows how to remove the Wireless LAN Module from the notebook.
Remove Wireless LAN Module
Disconnect the antennas and remove 2 screws (M2*4) on Wireless LAN card and pull out the
card from its slot....
Page 6
Disassembly Procedure
V1.0 2 - 6
Keyboard Module
The illustrations below show how to remove the Keyboard and disassemble the Keyboard Cover.
Remove the Keyboard
1. Open 5 latches (ESC, F5, F9, PrtSc and End) on keyboard module by a pair of tweezers.
2. Turn over the keyboard plate and disconnect...
Page 7
Disassembly Procedure
V1.0 2 - 7
Remove Keyboar d Cable
1. Use a flexible connector tool to unlock the cable connector on both ends (no. 1).
2. Carefully pull out the keyboard cable (no. 2) with a pair of tweezers.
3. Lock the connector (no. 3) again to avoid possible breakage....
Page 8
Disassembly Procedure
V1.0 2 - 8
Top Case Module
The illustrations below show how to remove and disassemble the Top Case Module of the notebook.
Remove the Top Case Module
1. Remove 2 screws (M2*4) on the bottom case. Then pry the hinge cover by a plastic blade and
remove the hinge cover....
Page 9
Disassembly Procedure
V1.0 2 - 9
M2.5*5
M2*4
M2.5*7 M2.5*7
Page 10
Disassembly Procedure
V1.0 2 - 10
3. Remove 6 screws (M2.5*5) on the top case. Then disconnect the switch board FPC, speaker cable
and the touchpad FPC.
4. Pry the edges of the top case and remove the top case to take it away.
Switch Board
FPC Speaker cable
Touchpad FPC
M2.5*5