Asus A7t Service Guide
Here you can view all the pages of manual Asus A7t Service Guide. The Asus manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
Disassembly procedure
Top Case Module TOP CASE
MODULE The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module. \
Removing Top Case Module TOP CASE
MODULE
REMOVE
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover....](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-10.png "Page 11
Disassembly procedure
Top Case Module TOP CASE
MODULE The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module. \
Removing Top Case Module TOP CASE
MODULE
REMOVE
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover....")
Disassembly procedure
Top Case Module TOP CASE
MODULE The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module. \
Removing Top Case Module TOP CASE
MODULE
REMOVE
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover....
Page 12
![Page 12
Disassembly procedure
Inverter cable Coaxialcable
4. Remove 2 screws [M2.5 * 8(L)] on rear side.
5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.
2 - 12](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-11.png "Page 12
Disassembly procedure
Inverter cable Coaxialcable
4. Remove 2 screws [M2.5 * 8(L)] on rear side.
5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.
2 - 12")
Disassembly procedure
Inverter cable Coaxialcable
4. Remove 2 screws [M2.5 * 8(L)] on rear side.
5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.
2 - 12
Page 13
![Page 13
Disassembly procedure
7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.
2 - 13](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-12.png "Page 13
Disassembly procedure
7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.
2 - 13")
Disassembly procedure
7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.
2 - 13
Page 14
![Page 14
Disassembly procedure
9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
Audio FPC
Touchpad FPC
Speaker cable Launch BD
2 - 14](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-13.png "Page 14
Disassembly procedure
9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
Audio FPC
Touchpad FPC
Speaker cable Launch BD
2 - 14")
Disassembly procedure
9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
Audio FPC
Touchpad FPC
Speaker cable Launch BD
2 - 14
Page 15
![Page 15
Disassembly procedure
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
M2*6L
M2*8L
12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
2 - 15](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-14.png "Page 15
Disassembly procedure
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
M2*6L
M2*8L
12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
2 - 15")
Disassembly procedure
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
M2*6L
M2*8L
12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
2 - 15
Page 16
![Page 16
Disassembly procedure
14. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module TOUCH
PAD
MODULE
REMOVE
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
2 - 16](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-15.png "Page 16
Disassembly procedure
14. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module TOUCH
PAD
MODULE
REMOVE
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
2 - 16")
Disassembly procedure
14. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module TOUCH
PAD
MODULE
REMOVE
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
2 - 16
Page 17
![Page 17
Disassembly procedure
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)] and take away the Launch BD. module.
LAUNCH BD
MODULE
REMOVE
Removing Audio board module AUDIO BOARD
MODULE
REMOVE
1. Remove 2 yellow mylar and disconnect the FPC.
2. Remove 2 screws [M2 * 4(L)] and take away the Launch...](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-16.png "Page 17
Disassembly procedure
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)] and take away the Launch BD. module.
LAUNCH BD
MODULE
REMOVE
Removing Audio board module AUDIO BOARD
MODULE
REMOVE
1. Remove 2 yellow mylar and disconnect the FPC.
2. Remove 2 screws [M2 * 4(L)] and take away the Launch...")
Disassembly procedure
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)] and take away the Launch BD. module.
LAUNCH BD
MODULE
REMOVE
Removing Audio board module AUDIO BOARD
MODULE
REMOVE
1. Remove 2 yellow mylar and disconnect the FPC.
2. Remove 2 screws [M2 * 4(L)] and take away the Launch...
Page 18
![Page 18
Disassembly procedure
Removing Speaker module SPEAKER
MODULE
REMOVE
1. Remove 6 screws [M2 * 4(L)] on the both side.
2. Remove 2 yellow mylar and take away the both speaker module.
2 - 18](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-17.png "Page 18
Disassembly procedure
Removing Speaker module SPEAKER
MODULE
REMOVE
1. Remove 6 screws [M2 * 4(L)] on the both side.
2. Remove 2 yellow mylar and take away the both speaker module.
2 - 18")
Disassembly procedure
Removing Speaker module SPEAKER
MODULE
REMOVE
1. Remove 6 screws [M2 * 4(L)] on the both side.
2. Remove 2 yellow mylar and take away the both speaker module.
2 - 18
Page 19
![Page 19
Disassembly procedure
LCD Module LCD
MODULE The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover. Please do not disassemble the individual parts.
Disassembling LCD Module LCD
DISASSEMBLY
1. Remove 8 rubber pads. And then 8 screws [M2.5 * 8(L)]...](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-18.png "Page 19
Disassembly procedure
LCD Module LCD
MODULE The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover. Please do not disassemble the individual parts.
Disassembling LCD Module LCD
DISASSEMBLY
1. Remove 8 rubber pads. And then 8 screws [M2.5 * 8(L)]...")
Disassembly procedure
LCD Module LCD
MODULE The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover. Please do not disassemble the individual parts.
Disassembling LCD Module LCD
DISASSEMBLY
1. Remove 8 rubber pads. And then 8 screws [M2.5 * 8(L)]...
Page 20
![Page 20
Disassembly procedure
3. Remove 2 screws [M2.5 * 5(L)] and disconnect the coaxial cable & LCD
cable then remove the inverter board.
4. Remove 2 screws [M2.5 * 8(L)] and remove the LCD bottom bracket from the
LCD cover.
5. Remove 2 screws [M2 * 5(L)] and remove the LCD module from the LCD
back covert.
2 - 20](http://img.usermanuals.tech/thumb/8/59882/w300_asus-a7t-service-guide-19.png "Page 20
Disassembly procedure
3. Remove 2 screws [M2.5 * 5(L)] and disconnect the coaxial cable & LCD
cable then remove the inverter board.
4. Remove 2 screws [M2.5 * 8(L)] and remove the LCD bottom bracket from the
LCD cover.
5. Remove 2 screws [M2 * 5(L)] and remove the LCD module from the LCD
back covert.
2 - 20")
Disassembly procedure
3. Remove 2 screws [M2.5 * 5(L)] and disconnect the coaxial cable & LCD
cable then remove the inverter board.
4. Remove 2 screws [M2.5 * 8(L)] and remove the LCD bottom bracket from the
LCD cover.
5. Remove 2 screws [M2 * 5(L)] and remove the LCD module from the LCD
back covert.
2 - 20