Asus A7t Service Guide
Have a look at the manual Asus A7t Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 7
Disassembly procedure
2. Turn the non-removable screw 180 degrees counter-clockwise to loosen
the CPU. Squeeze the vacuum handling pump and use it to lift the CPU
away.
3. Don’t touch the die above the CPU.
4. Remove the CPU away.
5. Remove CPU thermal pad from CPU die with a pair of tweezers.
Unlock
L
O
23
41
6. Remove 2 screws [M2 *3(L)] and...](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-6.png "Page 7
Disassembly procedure
2. Turn the non-removable screw 180 degrees counter-clockwise to loosen
the CPU. Squeeze the vacuum handling pump and use it to lift the CPU
away.
3. Don’t touch the die above the CPU.
4. Remove the CPU away.
5. Remove CPU thermal pad from CPU die with a pair of tweezers.
Unlock
L
O
23
41
6. Remove 2 screws [M2 *3(L)] and...")
![Page 8
Disassembly procedure
ODD Module ODD MODULE
The illustration below shows how to remove the ODD module.
1. Remove the rubber and remove 2 screws [M2 * 4(L)] from the bottom
case.
2. Put the screw driver here and push the ODD drive out from the NB.
2 - 8](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-7.png "Page 8
Disassembly procedure
ODD Module ODD MODULE
The illustration below shows how to remove the ODD module.
1. Remove the rubber and remove 2 screws [M2 * 4(L)] from the bottom
case.
2. Put the screw driver here and push the ODD drive out from the NB.
2 - 8")
![Page 10
Disassembly procedure
Main Memory Module
MEMORY
MODULE
The A7T Series Notebook has two expansion SO-DIMM slots for you to upgrade the total
memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here
introduce you the main memory slot.
Removing Memory module
1. Remove 1 screws [M2 * 4(L)] and take the DIMM door away.
MEMORY
REMOVAL
2. Remove the Memory module...](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-9.png "Page 10
Disassembly procedure
Main Memory Module
MEMORY
MODULE
The A7T Series Notebook has two expansion SO-DIMM slots for you to upgrade the total
memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here
introduce you the main memory slot.
Removing Memory module
1. Remove 1 screws [M2 * 4(L)] and take the DIMM door away.
MEMORY
REMOVAL
2. Remove the Memory module...")
![Page 11
Disassembly procedure
Top Case Module TOP CASE
MODULE The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module. \
Removing Top Case Module TOP CASE
MODULE
REMOVE
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover....](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-10.png "Page 11
Disassembly procedure
Top Case Module TOP CASE
MODULE The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module. \
Removing Top Case Module TOP CASE
MODULE
REMOVE
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover....")
![Page 12
Disassembly procedure
Inverter cable Coaxialcable
4. Remove 2 screws [M2.5 * 8(L)] on rear side.
5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.
2 - 12](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-11.png "Page 12
Disassembly procedure
Inverter cable Coaxialcable
4. Remove 2 screws [M2.5 * 8(L)] on rear side.
5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.
2 - 12")
![Page 13
Disassembly procedure
7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.
2 - 13](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-12.png "Page 13
Disassembly procedure
7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.
2 - 13")
![Page 14
Disassembly procedure
9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
Audio FPC
Touchpad FPC
Speaker cable Launch BD
2 - 14](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-13.png "Page 14
Disassembly procedure
9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
Audio FPC
Touchpad FPC
Speaker cable Launch BD
2 - 14")
![Page 15
Disassembly procedure
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
M2*6L
M2*8L
12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
2 - 15](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-14.png "Page 15
Disassembly procedure
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
M2*6L
M2*8L
12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
2 - 15")
![Page 16
Disassembly procedure
14. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module TOUCH
PAD
MODULE
REMOVE
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
2 - 16](http://img.usermanuals.tech/thumb/8/59882/w64_asus-a7t-service-guide-15.png "Page 16
Disassembly procedure
14. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module TOUCH
PAD
MODULE
REMOVE
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
2 - 16")
Disassembly procedure
Top Case Module TOP CASE
MODULE The illustrations below show how to disassemble and remove the top case module of the
notebook. The module contains the top case itself and touch pad module. \
Removing Top Case Module TOP CASE
MODULE
REMOVE
1. Remove 2 screws [M2 * 4(L)] (back - coaxial cable cover) and carefully
remove the Cable Cover.
2. Remove 2 screws [M2 * 4(L)] and disconnect the Coaxial cable & Inverter
cable with tweezers.
3. Carefully pull out the Antenna from the bottom case.
2 - 11
Disassembly procedure
Inverter cable Coaxialcable
4. Remove 2 screws [M2.5 * 8(L)] on rear side.
5. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the
both side.
6. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge.
2 - 12
Disassembly procedure
7. Remove 4 screws [M2.5 * 8(L)] on the Bottom case.
8. Separate LCD Module from the Top case module.
2 - 13
Disassembly procedure
9. Remove 8 screws [M2 * 4(L)] on the top case.
10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD
FPC from the motherboard.
Audio FPC
Touchpad FPC
Speaker cable Launch BD
2 - 14
Disassembly procedure
11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on
the bottom case.
M2*6L
M2*8L
12. Remove 3 screws [M2 * 3(L)] on the bottom case.
13. Remove 8 screws [M2 * 4(L)] on the bottom case.
2 - 15
Disassembly procedure
14. Now you can separate the Top case from the Bottom case.
Removing Touch Pad Module TOUCH
PAD
MODULE
REMOVE
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
2 - 16
Disassembly procedure
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)] and take away the Launch BD. module.
LAUNCH BD
MODULE
REMOVE
Removing Audio board module AUDIO BOARD
MODULE
REMOVE
1. Remove 2 yellow mylar and disconnect the FPC.
2. Remove 2 screws [M2 * 4(L)] and take away the Launch BD. module.
2 - 17
Disassembly procedure
Removing Speaker module SPEAKER
MODULE
REMOVE
1. Remove 6 screws [M2 * 4(L)] on the both side.
2. Remove 2 yellow mylar and take away the both speaker module.
2 - 18
Disassembly procedure
LCD Module LCD
MODULE The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover. Please do not disassemble the individual parts.
Disassembling LCD Module LCD
DISASSEMBLY
1. Remove 8 rubber pads. And then 8 screws [M2.5 * 8(L)] underneath them.
2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
2 - 19
Disassembly procedure
3. Remove 2 screws [M2.5 * 5(L)] and disconnect the coaxial cable & LCD
cable then remove the inverter board.
4. Remove 2 screws [M2.5 * 8(L)] and remove the LCD bottom bracket from the
LCD cover.
5. Remove 2 screws [M2 * 5(L)] and remove the LCD module from the LCD
back covert.
2 - 20