Apple powerbook g4 12 inch User Manual
Have a look at the manual Apple powerbook g4 12 inch User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PowerBook G4 (12-inch) Take Apart - 79 Inner Frame: PowerBook G4 (12-inch DVI)14. Install the replacement frame, and reassemble and test the computer. Replacement Note: Make sure you install the top EMI strip at the port side of the replacement frame.
80 - PowerBook G4 (12-inch) Take Apart RJ11 Modem Board and Cable: PowerBook G4 (12- RJ11 Modem Board and Cable: PowerBook G4 (12-inch) Tools This procedure requires the following tools: • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic flat-blade tool) Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • Keyboard
PowerBook G4 (12-inch) Take Apart - 81 RJ11 Modem Board and Cable: PowerBook G4 (12-• Top case • Reed switch • Hard drive • Modem • DC-to-DC board • Heatsink with fan • Inner Frame Procedure 1. With the inner frame removed from the computer, remove the tape that secures the RJ11 board and cable to both sides of the frame. Replacement Note: Reapply the tape to the frame. Refer to the RJ11 cable routing in the images below.
82 - PowerBook G4 (12-inch) Take Apart RJ11 Modem Board and Cable: PowerBook G4 (12- 2. Remove the EMI shield from the RJ11 board. The board includes the attached cable and connector. 3. Secure the replacement RJ11 modem board and cable to the frame, and reassemble and test the computer.
PowerBook G4 (12-inch) Take Apart - 83 RJ11 Modem Board and Cable: PowerBook G4 (12- RJ11 Modem Board and Cable: PowerBook G4 (12-inch DVI) Tools This procedure requires the following tools: • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic flat-blade tool) Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • Keyboard
84 - PowerBook G4 (12-inch) Take Apart RJ11 Modem Board and Cable: PowerBook G4 (12- • Top case • Hall effect sensor board • Hard drive • Modem • DC-to-DC board • Heatsink • Inner Frame Procedure 1. With the inner frame removed from the computer, remove the tape that secures the RJ11 board and cable to both sides of the frame. Replacement Note: Route the RJ11 cable and reapply the tape to the frame, as shown.
PowerBook G4 (12-inch) Take Apart - 85 RJ11 Modem Board and Cable: PowerBook G4 (12-2. Remove the EMI shield from the RJ11 board. The board includes the attached cable and connector. 3. Secure the replacement RJ11 modem board and cable to the frame, and reassemble and test the computer.
86 - PowerBook G4 (12-inch) Take Apart Fan: PowerBook G4 (12-inch DVI) Fan: PowerBook G4 (12-inch DVI) Tools This procedure requires the following tools: • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic flat-blade tool) Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • Keyboard • Top case • Hall effect Sensor Board
PowerBook G4 (12-inch) Take Apart - 87 Fan: PowerBook G4 (12-inch DVI)• Hard drive • Modem • DC-to-DC board • Heatsink • Inner Frame Procedure 1. With the inner frame removed from the computer, remove the three identical screws that secure the fan to the frame.
88 - PowerBook G4 (12-inch) Take Apart Fan: PowerBook G4 (12-inch DVI) 2. Note the routing of the fan cable in the channel of the frame. Replacement Note: Route the fan cable as shown. 3. Secure the replacement fan to the frame, and reassemble and test the computer.