Apple powerbook g4 12 inch User Manual
Have a look at the manual Apple powerbook g4 12 inch User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PowerBook G4 (12-inch) Take Apart - 139 Inverter Board (and Antenna Cable Assembly)7. Separate the clutch cover from the bezel and remove the LVDS cable. 8. Remove the antenna cables and inverter from the clutch cover.
140 - PowerBook G4 (12-inch) Take Apart Inverter Board (and Antenna Cable Assembly) Replacement Note: When reinstalling the clutch cover, check that the cables are routed as shown below (Bluetooth cable on the bottom of the clutch):
PowerBook G4 (12-inch) Take Apart - 141 Hinges with Bezel Brace Hinges with Bezel Brace Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • AirPort Extreme Card, if installed • Keyboard • Top case • Hall effect sensor board and cable • Hard drive • Modem • DC-to-DC board • Heatsink with fan • Inner frame (with RJ11 board attached) • Logic board • DC-in board • Optical drive • Display module • Display housing • LCD panel • Inverter (and antenna cable assembly)
142 - PowerBook G4 (12-inch) Take Apart Hinges with Bezel Brace Procedure Important: In the following steps, note that because of the position of the bezel, the designation of right and left differs. For example, the right hinge with bezel brace is removed from the left side of the bezel because you are viewing the bezel from its inner side. Likewise, the left hinge with bezel brace is removed from the right side of the bezel. 1. From the left side of the bezel, remove the three screws. 2. Remove the right hinge with bezel brace from the left side of the bezel.
PowerBook G4 (12-inch) Take Apart - 143 Hinges with Bezel Brace3.Replacement Note: If you are replacing the right hinge with bezel brace with a new one, make sure you transfer the sleep magnet to the replacement right bezel brace. Use a black stick to tilt the magnet out of the magnet holder on the right bezel brace. Important: Make sure the magnet is in place before reassembling the display module.
144 - PowerBook G4 (12-inch) Take Apart Hinges with Bezel Brace 4. From the right side of the bezel, slide out the left hinge with bezel brace (no screws and no magnet on this side). Replacement Note: To distinguish the right hinge with bezel brace from the left hinge with bezel brace, note that the right hinge has three flanges on the outer edge for the three screws. The left hinge has no screw flanges.
PowerBook G4 (12-inch) Take Apart - 145 Hinges with Bezel Brace Identifying the Replacement Hinges Before ordering a replacement hinge with bezel brace, verify the LCD panel manufacturer and hinge marking, as follows. 1. Check the manufacturer label shown on the LCD panel.
146 - PowerBook G4 (12-inch) Take Apart Hinges with Bezel Brace 2. If the label on the LCD panel shows Samsung as the manufacturer, order replacement hinges that show a SAM-L or SAM-R designation on the outer arm of the bezel brace. • To replace a SAM-L hinge, order 922-5714. • To replace a SAM-R hinge, order 922-5713
PowerBook G4 (12-inch) Take Apart - 147 Hinges with Bezel Brace3. If the label on the LCD panel shows IDTech as the manufacturer, order replacement hinges that show an LG-L or LG-R designation on the outer arm of the bezel brace. • To replace a LG-L hinge, order 922-5712. • To replace a LG-R hinge, order 922-5711
148 - PowerBook G4 (12-inch) Take Apart Display Bezel Display Bezel Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • AirPort Extreme Card, if installed • Keyboard • Top case • Reed switch (or hall effect sensor board) • Hard drive • Modem • DC-to-DC board • Heatsink with fan • Inner frame (with RJ11 board attached) • Logic board • DC-in board • Optical drive