Apple powerbook g4 12 inch 1 5ghz User Manual
Here you can view all the pages of manual Apple powerbook g4 12 inch 1 5ghz User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 81
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 79 Sleep Light Sleep Light Tools This procedure requires the following tools: • #0 Phillips screwdriver Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • Keyboard • Top case • Hall effect sensor board and cable • Hard drive • Modem • DC-to-DC board • Heatsink with fan • Inner frame (with RJ11 board attached)
Page 82
80 - PowerBook G4 (12-inch 1.5 GHz) Take Apart Sleep Light Procedure 1. Remove the screw from the sleep light board. 2. Remove the board from the bottom case. 3.Replacement Note: Make sure the bottom case has the sleep light pipe installed before installing the replacement sleep light board. 4. Install the replacement sleep light board, and reassemble and test the computer.
Page 83
![Page 83
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 81
Logic Board
Logic Board
Tools
This procedure requires the following tools:
• #0 Phillips screwdriver
• Black stick (or other nonconductive nylon or plastic flat-blade tool) \
Note: To organize the screws you remove from the computer, use a tray with divided
compartments (such as a plastic ice cube tray).
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery
• Memory door and memory card
• AirPort Extreme Card, if installed
•...](http://img.usermanuals.tech/thumb/462/38857/w300_powerbook-g4-12-inch-1-5ghz-82.png "Page 83
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 81
Logic Board
Logic Board
Tools
This procedure requires the following tools:
• #0 Phillips screwdriver
• Black stick (or other nonconductive nylon or plastic flat-blade tool) \
Note: To organize the screws you remove from the computer, use a tray with divided
compartments (such as a plastic ice cube tray).
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery
• Memory door and memory card
• AirPort Extreme Card, if installed
•...")
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 81 Logic Board Logic Board Tools This procedure requires the following tools: • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic flat-blade tool) \ Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • AirPort Extreme Card, if installed •...
Page 84
82 - PowerBook G4 (12-inch 1.5 GHz) Take Apart Logic Board • Hall effect sensor board and cable • Hard drive • Modem • DC-to-DC board • Heatsink with fan • Inner frame (with RJ11 board attached) Procedure 1. Remove the two screws at the lower right edge of the board.
Page 85
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 83 Logic Board 2. Holding the edges of the board tilt up the logic board. 3. While holding the board vertically, disconnect the DC-in connector cable from the underside of the logic board.
Page 86
![Page 86
84 - PowerBook G4 (12-inch 1.5 GHz) Take Apart
Logic Board
4. Remove the side EMI shield from the I/O ports.
Warning:
When installing the EMI shield over the logic board ports, make sure tha\
t
the shield fits loosely and the ports are not obstructed.
Replacement Warning:
If the shield is improperly installed, the EMI fingers
at the mini DVI port can bend under and obstruct the port. Make sure the\
port
is not blocked when installing the EMI shield and when installing the to\
p case.](http://img.usermanuals.tech/thumb/462/38857/w300_powerbook-g4-12-inch-1-5ghz-85.png "Page 86
84 - PowerBook G4 (12-inch 1.5 GHz) Take Apart
Logic Board
4. Remove the side EMI shield from the I/O ports.
Warning:
When installing the EMI shield over the logic board ports, make sure tha\
t
the shield fits loosely and the ports are not obstructed.
Replacement Warning:
If the shield is improperly installed, the EMI fingers
at the mini DVI port can bend under and obstruct the port. Make sure the\
port
is not blocked when installing the EMI shield and when installing the to\
p case.")
84 - PowerBook G4 (12-inch 1.5 GHz) Take Apart Logic Board 4. Remove the side EMI shield from the I/O ports. Warning: When installing the EMI shield over the logic board ports, make sure tha\ t the shield fits loosely and the ports are not obstructed. Replacement Warning: If the shield is improperly installed, the EMI fingers at the mini DVI port can bend under and obstruct the port. Make sure the\ port is not blocked when installing the EMI shield and when installing the to\ p case.
Page 87
![Page 87
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 85
Logic Board 5. Install the replacement logic board, and reassemble and test the computer.
Replacement Note:
Before securing the replacement logic board in the bottom case,
make sure the white plastic wireless guide is fitted against the AirPort\
Extreme Card
carrier in the bottom case. (The wireless guide requires no screws to h\
old it in place.)
Replacement Note:
If you are reinstalling the same logic board, make sure
you carefully remove the old...](http://img.usermanuals.tech/thumb/462/38857/w300_powerbook-g4-12-inch-1-5ghz-86.png "Page 87
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 85
Logic Board 5. Install the replacement logic board, and reassemble and test the computer.
Replacement Note:
Before securing the replacement logic board in the bottom case,
make sure the white plastic wireless guide is fitted against the AirPort\
Extreme Card
carrier in the bottom case. (The wireless guide requires no screws to h\
old it in place.)
Replacement Note:
If you are reinstalling the same logic board, make sure
you carefully remove the old...")
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 85 Logic Board 5. Install the replacement logic board, and reassemble and test the computer. Replacement Note: Before securing the replacement logic board in the bottom case, make sure the white plastic wireless guide is fitted against the AirPort\ Extreme Card carrier in the bottom case. (The wireless guide requires no screws to h\ old it in place.) Replacement Note: If you are reinstalling the same logic board, make sure you carefully remove the old...
Page 88
![Page 88
86 - PowerBook G4 (12-inch 1.5 GHz) Take Apart
DC-In Board
DC-In Board
This procedure requires the following tools:
• #0 Phillips screwdriver
• Black stick (or other nonconductive nylon or plastic flat-blade tool) \
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery
• Memory door and memory card
• AirPort Extreme Card, if installed
• Keyboard
• Top case
• Hall effect sensor board and cable
• Hard drive
• Modem
• DC-to-DC board](http://img.usermanuals.tech/thumb/462/38857/w300_powerbook-g4-12-inch-1-5ghz-87.png "Page 88
86 - PowerBook G4 (12-inch 1.5 GHz) Take Apart
DC-In Board
DC-In Board
This procedure requires the following tools:
• #0 Phillips screwdriver
• Black stick (or other nonconductive nylon or plastic flat-blade tool) \
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery
• Memory door and memory card
• AirPort Extreme Card, if installed
• Keyboard
• Top case
• Hall effect sensor board and cable
• Hard drive
• Modem
• DC-to-DC board")
86 - PowerBook G4 (12-inch 1.5 GHz) Take Apart DC-In Board DC-In Board This procedure requires the following tools: • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic flat-blade tool) \ Part Location Preliminary Steps Before you begin, remove the following: • Battery • Memory door and memory card • AirPort Extreme Card, if installed • Keyboard • Top case • Hall effect sensor board and cable • Hard drive • Modem • DC-to-DC board
Page 89
![Page 89
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 87
DC-In Board • Heatsink with fan
• Inner frame (with RJ11 board attached)
• Logic board
Procedure
1. Hold the DC-in board in place as you remove the screw that attaches the board to the
bottom case.
Note:
The screw might be hidden under the mylar sleeve at the lower corner of \
the
board.
2. Pull the flat cable up from the adhesive on the bottom case.
3. Pull the board away from the side of the bottom housing. Use a black stick to lift up the board, if...](http://img.usermanuals.tech/thumb/462/38857/w300_powerbook-g4-12-inch-1-5ghz-88.png "Page 89
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 87
DC-In Board • Heatsink with fan
• Inner frame (with RJ11 board attached)
• Logic board
Procedure
1. Hold the DC-in board in place as you remove the screw that attaches the board to the
bottom case.
Note:
The screw might be hidden under the mylar sleeve at the lower corner of \
the
board.
2. Pull the flat cable up from the adhesive on the bottom case.
3. Pull the board away from the side of the bottom housing. Use a black stick to lift up the board, if...")
PowerBook G4 (12-inch 1.5 GHz) Take Apart - 87 DC-In Board • Heatsink with fan • Inner frame (with RJ11 board attached) • Logic board Procedure 1. Hold the DC-in board in place as you remove the screw that attaches the board to the bottom case. Note: The screw might be hidden under the mylar sleeve at the lower corner of \ the board. 2. Pull the flat cable up from the adhesive on the bottom case. 3. Pull the board away from the side of the bottom housing. Use a black stick to lift up the board, if...
Page 90
88 - PowerBook G4 (12-inch 1.5 GHz) Take Apart DC-In Board 4. Remove the round port liner. 5. Install the replacement DC-in board, and reassemble and test the computer.