Apple power mac g4 quicksilver 2002 User Manual
Have a look at the manual Apple power mac g4 quicksilver 2002 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Take ApartSpeaker, Power Mac G4 (QuickSilvers) - 129 1. Using your thumbs, press the tabs in on the speaker shield. 2. Rotate the shield and remove it from the chassis.
Take ApartSpeaker, Power Mac G4 (QuickSilvers) - 130 3. Disconnect the speaker cable from the logic board. 4. Remove the two speaker mounting screws. 5. Remove the speaker and cable from the computer.
Take ApartSpeaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 131 Speaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio Before you begin, do the following: ¥ Open the side access panel. ¥ Remove the carrier support plate.
Take ApartSpeaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 132 1. Disconnect the speaker cable from the logic board. 2. Free the cable from the cable clamp and the fan bracket.
Take ApartSpeaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 133 3. Push the speaker tab in and pull the speaker housing back to release it. 4. Remove the speaker housing from the computer. 5. Remove the speaker from the speaker housing. Note: The speaker and speaker housing are separate parts.
Take ApartFront Panel Board, Power Mac G4 (QuickSilvers) - 134 Front Panel Board, Power Mac G4 (QuickSilvers) Before you begin, open the side access panel.
Take ApartFront Panel Board, Power Mac G4 (QuickSilvers) - 135 1. Using your thumbs, press the tabs in on the speaker shield. 2. Rotate the shield and remove it from the chassis.
Take ApartFront Panel Board, Power Mac G4 (QuickSilvers) - 136 3. Disconnect the front panel cable from the front panel board. 4. Remove the two screws and remove the front panel board from the computer.
Take ApartFront Panel Board, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - Front Panel Board, PCI/AGP Graphics/ Gigabit Ethernet/ Digital Audio Before you begin, open the side access panel.
Take ApartFront Panel Board, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 1. Using your thumbs, press the tabs in on the front panel shield. 2. Gently pull the front panel shield away from the chassis. 3. Disconnect the front panel cable from the front panel board. 4. Power Mac G4 (PCI Graphics): Disconnect power cable P4 and the FireWire cable from the front panel board.