Apple power mac g4 quicksilver 2002 User Manual
Here you can view all the pages of manual Apple power mac g4 quicksilver 2002 User Manual. The Apple manuals for Personal Computer are available online for free. You can easily download all the documents as PDF.
Page 151
Take ApartSpeaker, Power Mac G4 (QuickSilvers) - 129 1. Using your thumbs, press the tabs in on the speaker shield. 2. Rotate the shield and remove it from the chassis.
Page 152
Take ApartSpeaker, Power Mac G4 (QuickSilvers) - 130 3. Disconnect the speaker cable from the logic board. 4. Remove the two speaker mounting screws. 5. Remove the speaker and cable from the computer.
Page 153
Take ApartSpeaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 131 Speaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio Before you begin, do the following: ¥ Open the side access panel. ¥ Remove the carrier support plate.
Page 154
Take ApartSpeaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 132 1. Disconnect the speaker cable from the logic board. 2. Free the cable from the cable clamp and the fan bracket.
Page 155
Take ApartSpeaker, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 133 3. Push the speaker tab in and pull the speaker housing back to release it. 4. Remove the speaker housing from the computer. 5. Remove the speaker from the speaker housing. Note: The speaker and speaker housing are separate parts.
Page 156
Take ApartFront Panel Board, Power Mac G4 (QuickSilvers) - 134 Front Panel Board, Power Mac G4 (QuickSilvers) Before you begin, open the side access panel.
Page 157
Take ApartFront Panel Board, Power Mac G4 (QuickSilvers) - 135 1. Using your thumbs, press the tabs in on the speaker shield. 2. Rotate the shield and remove it from the chassis.
Page 158
Take ApartFront Panel Board, Power Mac G4 (QuickSilvers) - 136 3. Disconnect the front panel cable from the front panel board. 4. Remove the two screws and remove the front panel board from the computer.
Page 159
Take ApartFront Panel Board, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - Front Panel Board, PCI/AGP Graphics/ Gigabit Ethernet/ Digital Audio Before you begin, open the side access panel.
Page 160
Take ApartFront Panel Board, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 1. Using your thumbs, press the tabs in on the front panel shield. 2. Gently pull the front panel shield away from the chassis. 3. Disconnect the front panel cable from the front panel board. 4. Power Mac G4 (PCI Graphics): Disconnect power cable P4 and the FireWire cable from the front panel board.