Apple macbook pro 15 inch mid 2010 User Manual
Here you can view all the pages of manual Apple macbook pro 15 inch mid 2010 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 161
MacBook Pro (15-inch, Mid 2010) Take Apart — Right Speaker / Subwoofer 161 2010-12-15 Removal 1 Using black stick, disconnect hard drive/IR/sleep indicator cable from logic board. 2 Carefully pry cable from top of speaker assembly and bend back toward hard drive. 3 Disconnect speaker cable from logic board. Note: To disconnect, place black stick under cable and lift straight up.
Page 162
MacBook Pro (15-inch, Mid 2010) Take Apart — Right Speaker / Subwoofer 162 2010-12-15 4 Remove 6 screws: • 2 (3 mm) 922-9095 • 1 (2.4 mm) 922-9094 • 2 (12.1 mm) 922-9466 • 1 (7.8 mm) 922-9467 5 Remove speaker assembly from top case. Note: The right speaker/ subwoofer is made up of two sections connected by a narrow, twisted-wire cable. Be careful not to damage the cable when removing and reinstalling the part
Page 163
MacBook Pro (15-inch, Mid 2010) Take Apart — Right Speaker / Subwoofer 163 2010-12-15 Reassembly Note: Inspect the top and bottom rubber snubbers associated with the three large speaker screws. The snubbers are used for vibration damping. If any snubber is damaged, replace it with a new, corresponding top snubber (922-9502) or bottom snubber (922-9503). Reassembly Note: Replace screws in the order indicated.
Page 164
MacBook Pro (15-inch, Mid 2010) Take Apart — Fan, Right 164 2010-12-15 First Steps Remove: • Bottom case • Battery Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Torx T6 screwdriver Fan, Right
Page 165
MacBook Pro (15-inch, Mid 2010) Take Apart — Fan, Right 165 2010-12-15 Removal 1 Use a black stick to disconnect fan cable. 2 Remove 3 (3.0 mm) 922-9108 Torx T6 screws. 3 Lift fan out of top case.
Page 166
MacBook Pro (15-inch, Mid 2010) Take Apart — Fan, Left 166 2010-12-15 First Steps Remove: • Bottom case • Battery Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Torx T6 screwdriver Fan, Left
Page 167
MacBook Pro (15-inch, Mid 2010) Take Apart — Fan, Left 167 2010-12-15 Removal 1 Use a black stick to pry fan cable from logic board. 2 Remove 3 (3.0 mm) 922-9108 Torx T6 screws.
Page 168
MacBook Pro (15-inch, Mid 2010) Take Apart — Logic Board 168 2010-12-15 First Steps Remove: • Bottom case • Battery • AirPort/Bluetooth flex cable • Right fan Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Torx T6 screwdriver • Black stick Logic Board
Page 169
MacBook Pro (15-inch, Mid 2010) Take Apart — Logic Board 169 2010-12-15 Removal Caution: The LVDS cable/ lock bar is very fragile; handle with care. A broken lock bar results in a display assembly replacement. 1 Peel EMI gasket off the top of LVDS cable, pull towards the fan. 2 To disconnect LVDS cable, grasp black tab and gently swing LVDS lock bar up and back to unlock the cable. 3 Slide cable out of connector by pulling the cable. Do not pull the black tab or lock bar.
Page 170
MacBook Pro (15-inch, Mid 2010) Take Apart — Logic Board 170 2010-12-15 4 Remove 2 (1.2 mm) 922-9037 screws, and remove cable cover. 5 Caution: Referring to “Connector Types,” carefully disconnect 8 more cables in the order shown: (1) keyboard backlight (2) camera cable (3) optical drive (4) right speaker (5) hard drive/IR/sleep (6) trackpad flex (7) keyboard (8) battery indicator