Home > Apple > Personal Computer > Apple mac pro User Manual

Apple mac pro User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple mac pro User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Mac Pro Take Apart — Front Panel Board 101
    Part Location 
    						
    							Mac Pro Take Apart — Front Panel Board 102
    Procedure
    Disconnect the optical drive ribbon cable from the logic board and move the cable out of 1. 
    the way.  
    						
    							Mac Pro Take Apart — Front Panel Board 103
    Disconnect the following five cables from the front panel board: 2. 
    • FireWire 800 cable from connector J200 
    • USB cable from connector J201 
    • Front panel board power cable from connector J202 
    • Front panel board audio cable from connector J600 
    • Power button cable from connector J800  
    						
    							Mac Pro Take Apart — Front Panel Board 104
    Using a magnetized #1 Phillips screwdriver, remove the five front panel board mounting 3. 
    screws. 
    Lift the front panel board out of the computer.4. 
    Note: If you are replacing the front panel board with a new front panel board, separate the EMI 
    shield from the back of the board and transfer it to the new front panel board. 
    						
    							Mac Pro Take Apart — Power Button 105
    Power Button
    Tools
    The only tool required for this procedure is a jeweler’s flat-blade screwdriver.
    Preliminary Steps
    Before you begin, open the computer, lay it on its side with the access side facing up, and remove 
    the following:
    Hard drives and hard drive carriers in drive bays 1 and • 2
    PCI Express card installed in slot • 1
    Any 12-inch PCI Express card• s
    Top and bottom memory card• s
    Processor heatsink cove• r
    Front fan assembl• y 
    						
    							Mac Pro Take Apart — Power Button 106
    Part Location 
    						
    							Mac Pro Take Apart — Power Button 107
    Procedure
    Disconnect the optical drive ribbon cable from the logic board and move the cable out of 1. 
    the way.
    Disconnect the front panel board power cable from the front panel board and move it out of 2.  
    the way.
    Disconnect the power button cable from the front panel board. 3. 
    Lay the computer so that the front panel is facing down.4.  
    						
    							Mac Pro Take Apart — Power Button 108
    Remove the black rubber cap that covers the power button LED.5. 
    Using a jeweler’s flat-blade screwdriver, pry up the metal C-ring that secures the power 6. 
    button board. 
    Lift up and remove the power button board. 7.  
    						
    							Mac Pro Take Apart — Power Button 109
    Remove the metal activation ring that lies below the power button board. 8. 
    Remove the power button from the enclosure. 9.  
    						
    							Mac Pro Take Apart — AirPort Antenna Board with Cables 11 0
    AirPort Antenna Board  
    with Cables
    The AirPort Extreme antenna cables are part of the AirPort antenna board assembly. To remove or 
    replace the cables, you must replace the antenna board assembly
    Tools
    The only tools required for this procedure are a jeweler’s flat-blade screwdriver and a magnetized 
    jeweler’s Phillips #0 screwdriver.
    Preliminary Steps
    Before you begin, open the computer, lay it on its side with the access side facing up, and remove 
    the following:
    All hard drives and hard drive carrier• s
    All PCI Express card• s
    Top and bottom memory card• s
    Processor heatsink cove• r
    Front fan assembl• y
    Processor heatsink• s
    Memory cag• e
    Speaker assembl• y
    USB cabl• e
    AirPort Extreme card (if installed• )
    Bluetooth card (if installed• )
    Logic boar• d 
    						
    All Apple manuals Comments (0)

    Related Manuals for Apple mac pro User Manual